journal article·2024-09

Phase field simulation of dendrites morphology evolution in sodium metal batteries

Li Ting Gao, Zhan-Sheng Guo

Publisher page

Abstract

Sodium (Na) dendrite growth poses challenges such as short circuits and capacity loss, and the underlying mechanisms are unclear. Although the experiments of Na dendrite growth were reported, there are very few simulations that can assist in analyzing its morphology evolution mechanism. In addressing this challenge, we develop a phase-field model to explore the influence of current density, anisotropic strength , and Na-ion consumption on the evolution of Na dendrite morphology. It is found that higher current density promotes more dendrite growth and lateral branches. Anisotropy strength influences dendrite growth rates horizontally and vertically, with horizontal growth exceeding or equaling vertical growth, reducing short-circuit risks. Increased Na-ion consumption results in significant lateral branches, kinks, and pores in dendrite structures. These results offer valuable insights into mitigating the formation of erratic dendrites, holding significant implications for the advancement of Na-based batteries with high stability and safety.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Sodium metal anodes: emerging solutions to dendrite growth10.1021/acs.chemrev.8b00642 ↗
2. In operando observation of chemical and mechanical stability of Li and Na dendrites under quasi-zero electrochemical field10.1016/j.ensm.2017.10.007 ↗
3. Mechanism, modeling, detection, and prevention of the internal short circuit in lithium-ion batteries: recent advances and perspectives10.1016/j.ensm.2020.11.026 ↗
4. Phase-field simulation of Li dendrites with multiple parameters influence10.1016/j.commatsci.2020.109919 ↗
5. Combining theories and experiments to understand the sodium nucleation behavior towards safe sodium metal batteries10.1039/D0CS00033G ↗
6. Visualization of sodium metal anodes via operando X-ray and optical microscopy: controlling the morphological evolution of sodium metal plating10.1021/acsami.1c24673 ↗
7. Application of phase-field method in rechargeable batteries10.1038/s41524-020-00445-w ↗
8. Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: a phase field study10.1016/j.matdes.2022.110555 ↗
9. From classical thermodynamics to phase-field method10.1016/j.pmatsci.2021.100868 ↗
10. Interfacial electronic properties dictate Li dendrite growth in solid electrolytes10.1021/acs.chemmater.9b01967 ↗
11. Modulation of dendritic patterns during electrodeposition: a nonlinear phase-field model10.1016/j.jpowsour.2015.09.055 ↗
12. A metalophilic, anion-trapped composite gel electrolyte enables highly stable electrode/electrolyte interfaces in sodium metal batteries
13. Review of emerging concepts in SEI analysis and artificial SEI membranes for lithium, sodium, and potassium metal battery anodes
14. A 3D hierarchical host with enhanced sodiophilicity enabling anode-free sodium-metal batteries
15. Dendritic growth morphologies in Al-Zn alloys-part II: phase-field computations10.1007/s11661-013-1911-8 ↗
16. An electrochemical-mechanical phase field model for lithium dendrite10.1149/1945-7111/ac22c7 ↗
17. Solid-state electrolyte design for lithium dendrite suppression10.1002/adma.202002741 ↗
18. Modeling and numerical simulations of dendritic crystal growth10.1016/0167-2789(93)90120-P ↗
19. Ground state structures in ordered binary alloys with second neighbor interactions10.1016/0001-6160(72)90037-5 ↗
20. Phase-field modeling of solid electrolyte interface (SEI) influence on Li dendritic behavior10.1016/j.electacta.2018.01.212 ↗
21. Nonlinear phase field model for electrodeposition in electrochemical systems
22. In situ probing the origin of interfacial instability of Na metal anode10.1016/j.chempr.2023.06.002 ↗
23. Highly stable sodium batteries enabled by functional ionic polymer membranes10.1002/adma.201605512 ↗
24. Phase-field-crystal investigation of the morphology of a steady-state dendrite tip on the atomic scale10.1103/PhysRevE.95.062803 ↗
25. A phase-field investigation of factors affecting the morphology of uranium dendrites during electrodeposition10.1016/j.electacta.2023.142958 ↗
26. Alternating morphology transitions in electrochemical deposition10.1103/PhysRevLett.71.113 ↗
27. Reversible Na plating/stripping with high areal capacity using an electroconductive liquid electrolyte system10.1021/acsami.3c06554 ↗
28. Stabilizing a high-energy-density rechargeable sodium battery with a solid electrolyte10.1016/j.chempr.2018.01.007 ↗
29. Ultrathin surface coating enables the stable sodium metal anode10.1002/aenm.201601526 ↗
30. In situ optical imaging of sodium electrodeposition: effects of fluoroethylene carbonate10.1021/acsenergylett.7b00500 ↗