journal article·2024-09

Microstructure evolution and densification behavior of ultrafast high-temperature sintered Li6.5La3Zr1.5Ta0.5O12 ceramics

Xing Zhao, Wantong Wu, Yuhang Bai, Yuhao Wu, Jia Liu, Peipei Wang, Huan Luo, Ke Ren, Yan Song, Huiling Du, Jun Deng

Publisher page

Abstract

Increasing the heating rate during the sintering process of Li 6.5La 3Zr 1.5Ta 0.5O 12 (LLZTO) solid-state electrolyte is an effective method for suppressing lithium volatilization, tailoring grain growth, and achieving rapid densification. However, the ultrafast heating rate can lead to uneven surface temperature distribution of the electrolyte, subsequently affecting its microstructure and performance. Herein, we systematically investigate the microstructural evolution and densification behavior of LLZTO ceramics under rapid heating conditions using the ultrafast high-temperature sintering (UHS) method. An intercalibration technique combining finite element simulations and experimental data from infrared spectral measurements is used for prediction of the temperature distribution of the sample. Adjustment of the size ratio of the graphite felt to the sample diameter resulted in uniform temperature distribution, which aids in improving sintering quality. The densification mechanism of the samples during the UHS process is revealed by thermodynamics. Under sintering conditions with a current of 25 A applied for 30 s, the ultrafast heating rate (up to 10 4 °C/min) results in fine grains with a diameter of approximately 3.4 μm and a relative density of 93.2 %. The preferred samples finally exhibit good ionic conductivity stability, maintaining 3.09 × 10 −4 S cm −1 at dynamic pressures of 5–50 MPa at room temperature.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A review of composite solid-state electrolytes for lithium batteries: fundamentals, key materials and advanced structures10.1039/D0CS00305K ↗
2. A solid future for battery development10.1038/nenergy.2016.141 ↗
3. Processing thin but robust electrolytes for solid-state batteries10.1038/s41560-020-00759-5 ↗
4. Garnet electrolyte with an ultra-low interfacial resistance for Li-metal batteries10.1021/jacs.8b03106 ↗
5. Recent advances of Li7La3Zr2O12-based solid-state lithium batteries towards high energy density10.1016/j.ensm.2022.04.026 ↗
6. Key factors of the self-consolidation mechanism for sintering Li7La3Zr2O12 solid electrolytes10.1016/j.jpowsour.2022.232447 ↗
7. Manipulating Li2O atmosphere for sintering dense Li7La3Zr2O12 solid electrolyte10.1016/j.ensm.2019.01.018 ↗
8. Local electronic structure variation resulting in Li ‘filament’ formation within solid electrolytes10.1038/s41563-021-01019-x ↗
9. Garnet-type solid electrolyte: advances of ionic transport performance and its application in all-solid-state batteries10.1007/s40145-021-0489-7 ↗
10. Fast interdiffusion and Kirkendall effects of SiC-coated C/SiC composites joined by a Ti-Nb-Ti interlayer via spark plasma sintering10.1016/j.jeurceramsoc.2019.01.020 ↗
11. Shear strength enhancement of SiC-coated 3D C/SiC composite joints with a Ni-Ti-Nb multi-interlayer by interfacial microstructure tailoring10.1016/j.jeurceramsoc.2019.08.013 ↗
12. Low temperature sintering of fully inorganic all-solid-state batteries-Impact of Interfaces on full cell Performance10.1016/j.jpowsour.2020.228905 ↗
13. Effect of Al2O3 on the sintering of garnet-type Li6.5La3Zr1.5Ta0.5O1210.1016/j.ssi.2016.06.013 ↗
14. Low-temperature sintering of a garnet-type Li6.5La3Zr1.5Ta0.5O12 solid electrolyte and an all-solid-state lithium-ion battery10.1021/acsami.3c01038 ↗
15. HRTEM and XPS characterizations for probable formation of TiBxNy solid solution during sintering process of TiB2–20SiC–5Si3N4 composite10.1016/j.matchemphys.2022.126380 ↗
16. Flash sintering of Nanograin zirconia in <5 s at 850 °C10.1111/j.1551-2916.2010.04089.x ↗
17. Microstructure and dielectric property of flash sintered SiO2-coated BaTiO3 ceramics10.1016/j.scriptamat.2019.05.019 ↗
18. The scientific questions and technological opportunities of flash sintering: from a case study of ZnO to other ceramics10.1016/j.scriptamat.2017.12.006 ↗
19. Flash sintering of yttria-stabilized zirconia: Fundamental understanding and applications10.1016/j.scriptamat.2020.06.040 ↗
20. Insights into photoemission origins of flash sintering of ceramics10.1016/j.scriptamat.2021.113749 ↗
21. Development of a processing map for safe flash sintering of gadolinium-doped ceria10.1111/jace.17847 ↗
22. Reactive flash sintering of the complex oxide Li0.5La0.5TiO3 starting from an amorphous precursor powder10.1016/j.scriptamat.2019.09.037 ↗
23. High-toughness inorganic solid electrolytes via the use of reduced graphene oxide10.1016/j.matt.2020.05.003 ↗
24. Flash sintering of Li-ion conducting ceramic in a few seconds at 850 °C10.1016/j.scriptamat.2019.06.038 ↗
25. Rapid synthesis of Li4Ti5O12 as lithium-ion battery anode by reactive flash sintering10.1111/jace.18086 ↗
26. A general method to synthesize and sinter bulk ceramics in seconds10.1126/science.aaz7681 ↗
27. Rapid synthesis and sintering of metals from powders10.1002/advs.202004229 ↗
28. Ultrafast high-temperature sintering of Li7La3Zr1.75Nb0.25Al0.15O12 (LLZO)10.1016/j.jeurceramsoc.2022.08.054 ↗
29. Li7La3Zr2O12 solid electrolyte sintered by the ultrafast high-temperature method10.1016/j.jeurceramsoc.2021.05.041 ↗
30. Ultrafast high-temperature sintering of high-entropy oxides with refined microstructure and superior lithium-ion storage performance10.26599/JAC.2023.9220793 ↗
31. High-temperature ultrafast sintering: Exploiting a new Kinetic region to fabricate porous solid-state electrolyte Scaffolds10.1002/adma.202100726 ↗
32. Computation-guided synthesis of new garnet-type solid-state electrolytes via an ultrafast sintering technique10.1002/adma.202005059 ↗
33. Tailoring grain growth and densification toward a high-performance solid-state electrolyte membrane10.1016/j.mattod.2020.10.002 ↗
34. Ultrafast sintering of Na3Zr2Si2PO12 solid electrolyte for long lifespan solid-state sodium ion batteries10.1016/j.cej.2022.138771 ↗
35. Ultrafast-sintered self-standing LLZO membranes for high energy density lithium-garnet solid-state batteries10.1016/j.xcrp.2023.101473 ↗
36. The microstructural origin of rapid densification in 3YSZ during ultra-fast firing with or without an electric field10.1016/j.jeurceramsoc.2020.07.027 ↗
37. Ultra-fast firing: effect of heating rate on sintering of 3YSZ, with and without an electric field10.1016/j.jeurceramsoc.2017.01.033 ↗
38. Ultra-fast high-temperature sintering of strontium titanate10.1016/j.actamat.2022.117918 ↗
39. Ultra-fast high temperature sintering (UHS) of Li1.5Al0.5Ge1.5P3O12 electrolyte: a rationalization of the heating schedule10.1016/j.ceramint.2021.11.178 ↗
40. The influence of surface Chemistry on critical current density for garnet electrolyte10.1002/adfm.202113318 ↗
41. Developing preparation craft platform for solid electrolytes containing volatile components: experimental study of competition between Lithium loss and densification in Li7La3Zr2O1210.1021/acsami.2c08442 ↗
42. Stability of garnet-type solid electrolyte LixLa3A2-yByO12 (A=Nb or Ta, B=Sc or Zr)10.1016/j.ssi.2015.09.015 ↗