The dual modification of La and Zr of Ni-rich cathodes for improved cycling stability at elevated voltage and temperature
Source abstract
Abstract
Nickel-rich layered oxides are regarded as a promising cathode material for next-generation lithium-ion batteries (LIBs) with advanced power capabilities. However, their poor cycling performance, especially under high voltage and temperature conditions, has seriously limited their large-scale application. In this work, a simple and effective strategy is proposed to enhance the structural and interface stability of Ni-rich materials by La 4NiLiO 8 coating and Zr doping. The interfacial side reactions and intergranular microcracks of the modified material are inhibited, which is helpful in improving the electrochemical performance. Therefore, the initial capacity of dual modification of La and Zr of Ni-rich cathode is 196.4 mA h g −1 at 4.5 V and exhibits excellent cycling performance with a capacity retention of 82.1 % after 200 cycles. Moreover, at 50 °C, the initial capacity of the modified material is 239.0 mA h g −1, and the capacity retention is 63.1 % after 100 cycles, representing a significant improvement of 94.8 % over the unmodified sample.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Strain-retardant coherent perovskite phase stabilized Ni-rich cathode10.1038/s41586-022-05238-3 ↗
2. Ni-rich layered cathodes for lithium-ion batteries: from challenges to the future
3. Near-surface reconstruction in Ni-rich layered cathodes for high-performance lithium-ion batteries10.1038/s41560-023-01403-8 ↗
4. Regulating surface and grain-boundary structures of Ni-rich layered cathodes for ultrahigh cycle stability10.1002/smll.201906433 ↗
5. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
6. Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode10.1126/science.abc3167 ↗
7. Constructing O2/O3 homogeneous hybrid stabilizes Li-rich layered cathodes10.1016/j.ensm.2022.07.016 ↗
8. A layered/spinel heterostructured cathode for Li-ion batteries prepared by ultrafast Joule heating10.1016/j.cej.2023.148045 ↗
9. Improving LiNi0.9Co0.08Mn0.02O2's cyclic stability via abating mechanical damages10.1016/j.ensm.2020.02.028 ↗
10. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗
11. Capacity fading of Ni-rich Li[NixCoyMn1-x-y]O2 (0.6≤x≤0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
12. Deciphering the degradation discrepancy in Ni-rich cathodes with a diverse proportion of [003] crystallographic textures
13. Li[Ni0.9Co0.09W0.01]O2: a new type of layered oxide cathode with high cycling stability
14. Improved cycling stability of Li[Ni0.90Co0.05Mn0.05]O2 through microstructure modification by boron doping for Li-ion batteries10.1002/aenm.201801202 ↗
15. Microstructure engineered Ni-rich layered cathode for electric vehicle batteries10.1002/aenm.202100884 ↗
16. Co-free/Co-poor high-Ni cathode for high energy, stable and low-cost lithium-ion batteries10.1007/s12598-022-02252-2 ↗
17. Ti modification to improve the cyclic stability of Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials by suppressing mechanical fracture10.1016/j.ceramint.2022.06.087 ↗
18. Challenges and strategies to advance high-energy nickel-rich layered lithium transition metal oxide cathodes for harsh operation10.1002/adfm.202004748 ↗
19. Nanoscale operation of Ni-Rich cathode surface by polycrystalline solid electrolytes Li3.2Zr0.4Si0.6O3.6 coating10.1016/j.cej.2021.129217 ↗
20. Anhydride type film-forming electrolyte additives for high-temperature LiNi0.6Co0.2Mn0.2O2//graphite pouch cells10.1016/j.pnsc.2023.08.002 ↗
21. Stabilizing reaction interface in Ni-rich layered oxides cathode for high-performance lithium-ion batteries at a high cutoff voltage10.1016/j.cej.2021.132985 ↗
22. Simultaneous coating and doping of a nickel-rich cathode by an oxygen ion conductor for enhanced stability and power of lithium-ion batteries10.1021/acsami.9b10310 ↗
23. Dual elements coupling effect induced modification from the surface into the bulk lattice for Ni-rich cathodes with suppressed capacity and voltage decay10.1021/acsami.9b18946 ↗
24. Isotropic microstrain relaxation in Ni-rich cathodes for long cycling lithium ion batteries10.1021/acsnano.3c04773 ↗
25. Transition metal-doped Ni-rich layered cathode materials for durable Li-ion batteries10.1038/s41467-021-26815-6 ↗
26. Boosting the cycle stability of nickel-rich ternary materials at high voltage by coating mixed conductor Li7.5La3Zr1.5Co0.5O1210.1016/j.electacta.2024.143861 ↗
27. Mg,Ti-base surface integrated layer and bulk doping to suppress lattice oxygen evolution of Ni-rich cathode material at a high cut-off voltage10.1016/j.jechem.2022.03.053 ↗
28. Strengthened the structural stability of in-situ F− doping Ni-rich LiNi0.8Co0.15Al0.05O2 cathode materials for lithium-ion batteries10.1016/j.cej.2022.135537 ↗
29. Improved electrochemical performances of Ni-rich LiNi0.83Co0.12Mn0.05O2 by Mg-doping10.1016/j.jpowsour.2020.227718 ↗
30. Ti-gradient doping to stabilize layered surface structure for high performance high-Ni oxide cathode of Li-ion battery10.1002/aenm.201901756 ↗
31. Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries
32. Ultrafine-grained Ni-rich layered cathode for advanced Li-ion batteries10.1039/D1EE02898G ↗
33. Heuristic solution for achieving long-term cycle stability for Ni-rich layered cathodes at full depth of discharge10.1038/s41560-020-00693-6 ↗
34. Significantly improving cycling performance of cathodes in lithium ion batteries: the effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O210.1016/j.nanoen.2017.11.010 ↗
35. The combined effect of CaF2 coating and La-doping on electrochemical performance of layered lithium-rich cathode material10.1016/j.electacta.2018.04.077 ↗
36. Enhancing high-voltage performance of Ni-rich cathode by surface modification of self-assembled NASICON fast ionic conductor LiZr2(PO4)310.1021/acsami.9b00389 ↗
37. B-doped and La4NiLiO8-coated Ni-rich cathode with enhanced structural and interfacial stability for lithium-ion batteries10.1016/j.jechem.2022.04.037 ↗
38. Optimizing the interface engineering and structural stability of nickel-rich layered oxide cathode by dual-function modification10.1016/j.cej.2021.132908 ↗
39. An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes10.1016/j.nanoen.2021.106665 ↗
40. High-voltage-driven surface structuring and electrochemical stabilization of Ni-rich layered cathode materials for Li rechargeable batteries10.1002/aenm.202000521 ↗
41. Synergistic effect of Ce4+ modification on the electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials at high cut-off voltage10.1016/j.ceramint.2020.08.247 ↗
42. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries
43. Improving the structure stability of LiNi0.8Co0.1Mn0.1O2 by surface perovskite-like La2Ni0.5Li0.5O4 self-assembling and subsurface La3+ doping10.1021/acsami.9b12595 ↗
44. Simultaneous synthesis and synergetic stabilization of Zr-doped and Li6Zr2O7-coated Ni-rich layered cathode for advanced lithium ion batteries10.1016/j.electacta.2020.137120 ↗
45. Structural, electrochemical and Li-ion transport properties of Zr-modified LiNi0.8Co0.1Mn0.1O2 positive electrode materials for Li-ion batteries10.1016/j.jpowsour.2018.10.094 ↗
46. Enhanced cycle stability of Ni-rich LiNi0.83Co0.12Mn0.05O2 with Mg and La co-modification10.1007/s10008-022-05150-w ↗
47. Comprehensive study of Al- and Zr-modified LiNi0.8Mn0.1Co0.1O2 through synergy of coating and doping10.1021/acsaem.0c01420 ↗
48. Enhancing the structural stability of Ni-rich layered oxide cathodes with a preformed Zr-concentrated defective nanolayer10.1021/acsami.8b11112 ↗
49. Revealing the effect of Ti doping on significantly enhancing cyclic performance at a high cutoff voltage for Ni-rich LiNi0.8Co0.15Al0.05O2 cathode10.1021/acssuschemeng.9b01312 ↗
50. Al, Zr dual-doped cobalt-free nickel-rich cathode materials for lithium-ion batteries10.1016/j.pnsc.2022.12.004 ↗
51. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
52. A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles10.1021/acs.nanolett.5b00045 ↗
53. Oxygen release induced chemomechanical breakdown of layered cathode materials10.1021/acs.nanolett.8b01036 ↗
54. An effective doping strategy to improve the cyclic stability and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode10.1016/j.cej.2020.126195 ↗
55. Enhanced rate performance and cycle stability of LiNi0.6Co0.2Mn0.2O2 at high cut-off voltage by Li6.1La3Al0.3Zr2O12 surface modification10.1016/j.apsusc.2020.146556 ↗
56. Nanoscale surface modification to suppress capacity fade of Ni-Rich layered oxide material at high cut-off voltage10.1016/j.cej.2022.138911 ↗