journal article·2024-07

Study of high temperature mechanical properties and damage behavior of Ni-YSZ anode/SrO–MgO–SiO2 glass-ceramic sealant/430 s.s. interconnect system in solid oxide fuel cells (SOFC)

Kai Hu, Jiankang Zhou, Xiucheng Zhang, Zhihui Liu, Xiang Xing, Yuming Wang, Zixi Wang

Publisher page

Abstract

In the sealing system of Ni-YSZ anode/SrO–MgO–SiO 2 glass-ceramic sealant/430 s s. interconnect, the phase transformation and mechanical properties of interfaces are studied after operating 0 h, 100 h, and 1800 h at 750 °C. The results show that the interface fracture appears in the glass/anode and glass/interconnect interfaces after operating at 1800 h. The interface mechanical parameters within different operation times are collected to investigate the effects of crystallization, penetration, and high temperature mechanical properties on the interlayer stress and structure damage. The Sr 2MgSi 2O 7 crystal phase increases the glass modulus from 104.5 GPa to 129.8 GPa with a runtime from 0 h to 1800 h. The modulus of the Ni-YSZ interface also increases from 82.4 GPa to 128.3 GPa with the glass penetration process. The 430 s s. modulus is reduced by 13 % at 750 °C after 1800 h to reach 191.1 GPa. The established anode/glass/interconnect interlayer stress model accurately calculates the compressive stress at the glass/anode side interface and glass/interconnect side interface, with values reaching −755.2 MPa and −587.1 MPa, respectively. The crystallization zone of the SrO–MgO–SiO 2 glass-side interface near Ni-YSZ and 430 s s. become the stress damage sensitive zones and break under interlayer stress.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Indicators of Global Climate Change 2022: annual update of large-scale indicators of the state of the climate system and human influence10.5194/essd-15-2295-2023 ↗
2. Achieving near-zero emission and high-efficient combined cooling, heating and power based on biomass gasification coupled with SOFC hybrid system10.1016/j.fuel.2023.129751 ↗
3. Taking stock of nationally determined contributions: continued ratcheting of ambition is critical to limit global warming to 1.5°C10.1016/j.oneear.2023.08.019 ↗
4. Integration of Solid Oxide Fuel Cells into oil and gas operations: needs, opportunities, and challenges10.1016/j.jclepro.2019.118924 ↗
5. The atlas of unburnable oil: spatial criteria for supply-side climate policies
6. Readiness evaluation of SOFC-MGT hybrid systems with carbon capture for distributed combined heat and power10.1016/j.enconman.2023.116728 ↗
7. Challenges and advancement in direct ammonia solid oxide fuel cells: a review10.1039/D3QI01557B ↗
8. Progress in material development for low-temperature solid oxide fuel cells: a review
9. Nanotechnologies in ceramic electrochemical cells
10. Anode material for solid oxide fuel cell: a review
11. Review on recent advancement in cathode material for lower and intermediate temperature solid oxide fuel cells application10.1016/j.ijhydene.2021.10.094 ↗
12. Nanocrystal engineering of thin-film yttria-stabilized zirconia electrolytes for low-temperature solid-oxide fuel cells10.1021/acsami.3c09025 ↗
13. Numerical investigations on the damage behaviour of a reconstructed anode for solid oxide fuel cell application10.3390/en14238082 ↗
14. Influence of operating conditions on the fuel electrode degradation of solid oxide electrolysis cell investigated by phase field model with wettability analysis10.1016/j.jpowsour.2023.233700 ↗
15. Glasses and glass-ceramics in the CaO–MgO–SiO2 system: diopside containing compositions - a brief review10.1016/j.jnoncrysol.2023.122351 ↗
16. Study of sealants for SOFC10.1016/j.ijhydene.2016.07.156 ↗
17. High gas tightness ZrO2-added silicate glass sealant with low thermal stress for solid oxide fuel cells10.1016/j.ceramint.2023.03.088 ↗
18. Improvement of sealing performance for Al2O3 fiber-reinforced compressive seals for intermediate temperature solid oxide fuel cell10.1016/j.ceramint.2019.07.209 ↗
19. Ba0.5Sr0.5Co0.8Fe0.2O3−δ-Sm0.2Ce0.8O1.9 carbonate perovskite coating on ferritic stainless steel interconnect for low temperature solid oxide fuel cells10.1016/j.matchemphys.2020.123433 ↗
20. A comprehensive review on durability improvement of solid oxide fuel cells for commercial stationary power generation systems10.1016/j.apenergy.2023.121864 ↗
21. In-situ formed CuFe2O4 spinel coating by electroplating method for solid oxide fuel cell interconnect10.1016/j.cej.2023.144397 ↗
22. The effect of strain induced phase transformation on the thermal expansion compatibility of plasma sprayed spinel coating on SOFC metallic interconnect – a study using in-situ high temperature X-ray diffraction10.1016/j.ijhydene.2023.04.322 ↗
23. Visualizing internal micro-damage distribution in solid oxide fuel cells10.1016/j.jpowsour.2023.233059 ↗
24. Interfacial interactions between an alkali-free borosilicate viscous sealing glass and aluminized ferritic stainless steel10.1016/j.jpowsour.2013.11.018 ↗
25. Behaviour of 54.4SiO2-13.7Na2O-1.7K2O-5.0CaO-12.4MgO-0.6Y2O3-11.3Al2O3-0.9B2O3 HT-SOFC glass sealant under oxidising and reducing atmospheres10.1016/j.ceramint.2021.11.151 ↗
26. Visualization and mechanical strength of glass seal in planar type solid oxide fuel cells10.1016/j.ijhydene.2020.05.153 ↗
27. Physical and sealing properties of BaO–Al2O3–SiO2–CaO–V2O5 glasses for solid oxide fuel cell applications10.1016/j.ijhydene.2022.01.094 ↗
28. Effect of interconnect pre-oxidation on high-temperature wettability and mechanical properties of glass seals in SOFC10.1111/jace.18024 ↗
29. Role of MgO in lowering glass transition temperature and increasing hardness of lithium silicate glass and glass-ceramics10.1016/j.ceramint.2022.01.139 ↗
30. Improvement of thermal cycle stability of YSZ-glass composite seals for intermediate temperature solid oxide fuel cell10.1016/j.ceramint.2023.08.359 ↗
31. Rare earth added barium alumino borosilicate glass-ceramics as sealants in solid oxide fuel cells10.1016/j.jnoncrysol.2021.121242 ↗
32. Crystal structure of Sr-akermanite glass-ceramics10.1016/j.materresbull.2006.03.010 ↗
33. Polarized IR and Raman spectra of Ca 2MgSi 2O 7, Ca 2ZnSi 2O 7 and Sr 2MgSi 2O 7 single crystals: temperature-dependent studies of commensurate to incommensurate and incommensurate to normal phase transitions10.1016/j.jssc.2012.02.051 ↗
34. Co-existence of amorphous and crystalline phases in Na-doped SrSiO3 system10.1039/C5RA27442G ↗
35. CMAS corrosion resistance of YSZ thermal barrier coatings enhanced by Pt–Al films10.1016/j.ceramint.2023.11.255 ↗
36. Microstructure and tribological properties of ZrB2-enhanced NiCrBSi coatings prepared by high-velocity oxy-fuel spraying10.1016/j.surfcoat.2023.129745 ↗
37. Long-term stability of SOFC glass sealant under oxidising and reducing atmospheres10.1016/j.ceramint.2020.12.019 ↗
38. Mechanical characterization of fatigue and cyclic plasticity of 304L stainless steel at elevated temperature10.1007/s11340-023-00992-5 ↗
39. Preparation and reliability of wearable blue light-storing buttons10.1149/2162-8777/ac232b ↗
40. Structural, morphological and mechanical properties of Dy3+ doped Sr2MgSi2O7 nanocomposites10.1016/j.jssc.2022.123501 ↗
41. The correlation between microstructure and nanoindentation property of neutron-irradiated austenitic alloy D910.1016/j.actamat.2020.05.020 ↗
42. Erratum to: CMAS corrosion resistance in high temperature and rainwater environment of double-layer thermal barrier coatings modified by rare earth10.1016/j.ceramint.2019.05.301 ↗
43. Determining the mechanical properties of solid oxide fuel cell by an improved work of indentation approach10.1016/j.jpowsour.2011.10.125 ↗
44. Quenching stress and fracture of paraffin droplet during solidification and adhesion on metallic substrate10.1016/j.surfcoat.2019.06.067 ↗
45. Discharge performance and behavior of Mg-xSr binary alloys as novel anodes for primary Mg-Air cells10.1016/j.jpowsour.2024.234269 ↗