When less is more: Enhancement of green hydrogen production and efficiency by using electrodes with ultra-low platinum loadings
Source abstract
Abstract
Sulfur dioxide depolarized electrolysis (SDE) is a promising technology for cost-effective green hydrogen production that can be used for the storage of intermittent renewable energies used to power the electrolyzer. The obtained hydrogen can be stored and used as a source for producing electricity in a fuel cell. However, high platinum loadings (around 2 mgPt cm−2) in the anode and cathode electrodes significantly contribute to the overall cost of the electrolyzer. This study aimed to optimize both electrodes using the electrospray technique for the deposition of ultra-low Pt loadings. The electrodes achieved a total platinum loading as low as 0.4 mgPt cm−2 (0.3 mgPt cm−2 for the anode and 0.1 mgPt cm−2 for the cathode), an 80 % reduction compared to common platinum loadings. This reduction not only increased the hydrogen production rate (18 mL min−1 with optimized electrodes vs. 4.7 mL min−1 with non-optimized electrodes) but also decreased the production of hydrogen sulfide in the cathode, resulting in a hydrogen stream with higher purity. Overall, this study demonstrates the potential of electrospray for achieving low platinum loadings and improving the efficiency of SDE for green hydrogen production.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Advanced battery technologies research · Hybrid Renewable Energy Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Role of renewable energy sources in environmental protection: a review10.1016/j.rser.2010.11.037 ↗
2. Powering the planet: chemical challenges in solar energy utilization10.1073/pnas.0603395103 ↗
3. Decarbonising energy: the developing international activity in hydrogen technologies and fuel cells10.1016/j.jechem.2020.03.087 ↗
4. 2019 · vol. 53 · 24
5. Development and future scope of renewable energy and energy storage systems10.3390/smartcities5020035 ↗
6. Review and comparison of various hydrogen production methods based on costs and life cycle impact assessment indicators10.1016/j.ijhydene.2021.09.142 ↗
7. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
8. Control analysis of renewable energy system with hydrogen storage for residential applications10.1016/j.jpowsour.2005.04.038 ↗
9. Overview of energy storage in renewable energy systems10.1016/j.ijhydene.2016.06.243 ↗
10. Powering the hydrogen economy from waste heat: a review of heat-to-hydrogen concepts10.1002/cssc.201901426 ↗
11. Hydrogen production from renewable and sustainable energy resources: promising green energy carrier for clean development10.1016/j.rser.2015.12.112 ↗
12. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
13. Winter · 2012
14. Hybrid sulfur cycle for H2production: a sensitivity study of the electrolysis step in a filter-press cell10.1016/j.ijhydene.2009.12.046 ↗
15. Development of the hybrid sulfur cycle for use with concentrated solar heat. I. Conceptual design10.1016/j.ijhydene.2017.06.241 ↗
16. First approaches for hydrogen production by the depolarized electrolysis of SO2 using phosphoric acid doped polybenzimidazole membranes10.1016/j.ijhydene.2021.06.117 ↗
17. Review of anodic catalysts for SO2 depolarized electrolysis for “green hydrogen” production10.3390/catal9010063 ↗
18. Electrochemical oxidation of aqueous sulfur dioxide II . Comparative studies on platinum and gold electrodes10.1149/2.060209jes ↗
19. Electrochemical aspects of the Hybrid Sulfur Cycle for large scale hydrogen production10.1016/j.ijhydene.2014.05.112 ↗
20. Investigation of anode materials in the anodic oxidation of sulphur dioxide in sulphuric acid solutions10.1016/S0013-4686(99)00057-2 ↗
21. Towards a circular economy for Pt catalysts. Case study: Pt recovery from electrodes for hydrogen production10.1016/j.apcatb.2023.122414 ↗
22. Platinum recovery techniques for a circular economy10.3390/catal11080937 ↗
23. Lowering the platinum loading of high temperature polymer electrolyte membrane fuel cells with acid doped polybenzimidazole membranes10.1016/j.jpowsour.2015.05.031 ↗
24. Electrospray deposition of catalyst layers with ultralow Pt loading for cost-effective H2 production by SO2 electrolysis10.1021/acsaem.1c03672 ↗
25. Peak utilization of catalyst with ultra-low Pt loaded PEM fuel cell electrodes prepared by the electrospray method10.1016/j.jpowsour.2012.12.029 ↗
26. Novel cross-linked PBI-blended membranes evaluated for high temperature fuel cell application and SO2electrolysis10.1016/j.matpr.2017.12.384 ↗
27. Enhancement of the green H2 production by using TiO2 composite polybenzimidazole membranes10.3390/nano12172920 ↗
28. Characterization of PBI/graphene oxide composite membranes for the SO2 depolarized electrolysis at high temperature10.3390/membranes12020116 ↗
29. Enhancement of SO2 high temperature depolarized electrolysis by means of graphene oxide composite polybenzimidazole membranes10.1016/j.jclepro.2022.132372 ↗
30. High-pressure PEM water electrolyser: a review on challenges and mitigation strategies towards green and low-cost hydrogen production10.1016/j.enconman.2022.115985 ↗
31. Hydrogen production by PEM water electrolysis – a review
32. A comparative overview of hydrogen production processes10.1016/j.rser.2016.09.044 ↗
33. Parametric study of operating conditions of an SO2-depolarized electrolyzer10.1016/j.ijhydene.2020.06.067 ↗
34. Development and testing of a PEM SO2-depolarized electrolyzer and an operating method that prevents sulfur accumulation10.1016/j.ijhydene.2015.08.041 ↗
35. The electrochemical oxidation of aqueous sulfur dioxide: a critical review of work with respect to the hybrid sulfur cycle10.1016/j.electacta.2009.09.067 ↗
36. High temperature creep behavior of phosphoric acid-polybenzimidazole gel membranes10.1002/polb.23791 ↗
37. Sulfonated polybenzimidazoles for high temperature PEM