journal article·2024-06

Analysis of electro-chemical impedance and state of health based on permanent expansion for prismatic batteries

Yidong Xu, Hengyun Zhang, Ruitong Liu, Wenlin Yuan

Publisher page

Abstract

The estimation of State of Health (SOH) constitutes the fundamental basis for performance optimization and fault diagnosis of battery management systems under realistic operating conditions. This study aims to investigate the intrinsic correlations among battery capacity degradation, permanent expansion rate, and Electrochemical Impedance Spectroscopy (EIS) through detailed measurement and analysis of prismatic electric bicycle batteries before and after service. Firstly, by analyzing the internal inconsistencies within the module, it is identified that there is a close relationship between SOH and permanent thickness expansion rate. Secondly, Equivalent Circuit Models (ECMs) are fitted and Distribution of Relaxation Times (DRT) analysis is conducted with varying regularization parameters to examine the variations in EIS in relation to SOH and expansion rate. Subsequently, a novel empirical model is proposed for SOH estimation by introducing the permanent thickness expansion rate as new dimension, departing from the traditional models that utilize aging cycle counts. To extend the model`s applicability, data from both pouch and prismatic batteries are evaluated, resulting in high R 2 values of 0.994 and 0.945, respectively. This research is helpful in comprehending battery aging mechanisms and forecasting battery lifetime, offering valuable theoretical and practical insights for the advancement of battery state estimation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Overcoming the challenges of integrating variable renewable energy to the grid: a comprehensive review of electrochemical battery storage systems10.1016/j.jpowsour.2023.233343 ↗
2. Review on grid-tied modular battery energy storage systems: configuration classifications, control advances, and performance evaluations10.1016/j.est.2023.109272 ↗
3. A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles10.1016/j.jpowsour.2021.230001 ↗
4. Review on new-generation batteries technologies: trends and future directions10.3390/en16227530 ↗
5. Design approaches for Li-ion battery packs: a review10.1016/j.est.2023.109197 ↗
6. A review on power electronic converters for modular BMS with active balancing10.3390/en16073255 ↗
7. A review of multi-state joint estimation for lithium-ion battery: research status and suggestions10.1016/j.est.2023.109071 ↗
8. A review of health estimation methods for Lithium-ion batteries in Electric Vehicles and their relevance for Battery Energy Storage Systems10.1016/j.est.2023.109194 ↗
9. A review on battery model-based and data-driven methods for battery management systems10.3390/en16237807 ↗
10. Lithium-ion battery lifetime extension: a review of derating methods10.1016/j.jpowsour.2023.232805 ↗
11. Experimental determinations of thermophysical parameters for lithium-ion batteries: a systematic review10.1016/j.etran.2024.100321 ↗
12. Incremental capacity analysis based adaptive capacity estimation for lithium-ion battery considering charging condition10.1016/j.apenergy.2020.115074 ↗
13. Investigation of lithium-ion battery degradation mechanisms by combining differential voltage analysis and alternating current impedance10.1016/j.jpowsour.2019.227575 ↗
14. State of health (SoH) estimation and degradation modes analysis of pouch NMC532/graphite Li-ion battery10.1016/j.jpowsour.2021.229884 ↗
15. Comparative study of equivalent circuit models performance in four common lithium-ion batteries: LFP, NMC, LMO, nca10.3390/batteries7030051 ↗
16. State-of-health (SOH) evaluation on lithium-ion battery by simulating the voltage relaxation curves10.1016/j.electacta.2019.02.055 ↗
17. A state of health estimation method for lithium-ion batteries based on voltage relaxation model10.3390/en12071349 ↗
18. Open-circuit voltage models for battery management systems: a review10.3390/en15186803 ↗
19. Towards unified machine learning characterization of lithium-ion battery degradation across multiple levels: a critical review10.1016/j.apenergy.2022.119030 ↗
20. Detecting undesired lithium plating on anodes for lithium-ion batteries – a review on the in-situ methods10.1016/j.apenergy.2021.117386 ↗
21. State of health estimation of lithium-ion battery aging process based on time-frequency fusion characteristics10.1016/j.jpowsour.2023.234002 ↗
22. Identification and quantification of ageing mechanisms in Li-ion batteries by Electrochemical impedance spectroscopy10.1016/j.electacta.2022.140801 ↗
23. Investigation of lithium-ion battery degradation mechanisms by combining differential voltage analysis and alternating current impedance10.1016/j.jpowsour.2019.227575 ↗
24. Study on remaining useful life prediction of lithium-ion batteries based on charge transfer resistance
25. Understanding Li-based battery materials via electrochemical impedance spectroscopy10.1038/s41467-021-26894-5 ↗
26. The timescale identification decoupling complicated kinetic processes in lithium batteries10.1016/j.joule.2022.05.005 ↗
27. Comparative analysis for commercial li-ion batteries degradation using the distribution of relaxation time method based on electrochemical impedance spectroscopy10.1016/j.energy.2022.125972 ↗
28. Adaptive state of health estimation for lithium-ion batteries using impedance-based timescale information and ensemble learning10.1016/j.energy.2023.129283 ↗
29. Degradation mechanism analysis and State-of-Health estimation for lithium-ion batteries based on distribution of relaxation times
30. Comparison of methodologies to estimate state-of-health of commercial Li-ion cells from electrochemical frequency response data10.1016/j.jpowsour.2022.231814 ↗
31. Impedance characterization of lithium-ion batteries aging under high-temperature cycling: importance of electrolyte-phase diffusion10.1016/j.jpowsour.2019.04.040 ↗
32. Early warning method and fire extinguishing technology of lithium-ion battery thermal runaway: a review10.3390/en16072960 ↗
33. Volume, pressure and thickness evolution of Li10.1149/2.1691712jes ↗
34. High-energy lithium metal pouch cells with limited anode swelling and long stable cycles10.1038/s41560-019-0390-6 ↗
35. Operando pressure measurements reveal solid electrolyte interphase growth to rank Li-ion cell performance10.1016/j.joule.2018.12.009 ↗
36. Multi sensor fusion methods for state of charge estimation of smart lithium-ion batteries10.1016/j.est.2023.108736 ↗
37. Investigation of the influence of different bracing of automotive pouch cells on cyclic liefetime and impedance spectra10.1016/j.est.2018.11.019 ↗
38. Active and passive safety enhancement for batteries from force perspective10.1016/j.rser.2023.113740 ↗
39. Battery thermal runaway preventive time delay strategy using different melting point phase change materials
40. Performance assessment of valve regulated lead acid battery for E-bike in field test10.1016/j.matpr.2021.08.305 ↗
41. Remaining useful life and state of health prediction for lithium batteries based on differential thermal voltammetry and a deep-learning model10.1016/j.jpowsour.2022.232030 ↗
42. Deconvolving distribution of relaxation times, resistances and inductance from electrochemical impedance spectroscopy via statistical model selection: exploiting structural-sparsity regularization and data-driven parameter tuning10.1016/j.electacta.2019.05.010 ↗
43. Insight into the origin of pseudo peaks decoded by the distribution of relaxation times/differential capacity method for electrochemical impedance spectroscopy10.1016/j.jelechem.2022.116176 ↗
44. The probabilistic deconvolution of the distribution of relaxation times with finite Gaussian processes10.1016/j.electacta.2022.140119 ↗
45. Analysis, design, and generalization of electrochemical impedance spectroscopy (EIS) inversion algorithms10.1149/1945-7111/ab9c82 ↗
46. Finding the optimal regularization parameter in distribution of relaxation times analysis10.1002/celc.201901863 ↗
47. A high-precision approach to reconstruct distribution of relaxation times from electrochemical impedance spectroscopy10.1016/j.jpowsour.2016.01.067 ↗
48. Extraction of distribution function of relaxation times by using levenberg-marquardt algorithm: a new approach to apply a discretization error free jacobian matrix10.1149/1945-7111/ac55c9 ↗
49. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
50. A review on the distribution of relaxation times analysis: a powerful tool for process identification of electrochemical systems10.1016/j.jpowsour.2023.233845 ↗
51. Corruption of the Pearson correlation coefficient by measurement error and its estimation, bias, and correction under different error models10.1038/s41598-019-57247-4 ↗
52. A review of current research on the formation mechanism of lithium batteries
53. High-efficient prediction of state of health for lithium-ion battery based on AC impedance feature tuned with Gaussian process regression10.1016/j.jpowsour.2023.232737 ↗
54. Estimation of state of health of lithium-ion batteries based on charge transfer resistance considering different temperature and state of charge10.1016/j.est.2018.11.020 ↗
55. Semi-empirical degradation model of lithium-ion battery with high energy density