Facile method of preparation of carbon nanotubes based aerogels as cathodes for lithium-oxygen cells
Source abstract
Abstract
Lithium oxygen cells (Li–O2 cells) are considered one of the most promising solutions to the constantly growing demand for energy storage capacity, mainly in the electric vehicle and industrial energy storage sectors, due to their extremely high energy density resulting from the semi-open system in which these cells operate, and the type of reactions taking place during discharging and charging (ORR and OER, respectively). However, potential of the Li–O2 cell is heavily limited by the sluggish kinetics of electrode reactions and the possible side reactions occurring during the work of the cell. The development of an effective cathode is one of the possible solutions to address this challenge. Carbon nanotubes (CNT), have been proposed for cathode application because of their good electrical conductivity, relatively high surface area, and high catalytic activity in ORR and OER. To facilitate those favorable characteristics of CNT, the development of a free-standing cathode could further enhance the performance of Li–O2 cells. In this work, the facile method for the preparation of CNT aerogels, via intensive homogenization and freeze-drying, is presented. The influence of the precursor concentration on the porous structure of obtained aerogels is analyzed. Furthermore, the correlation between concentration, porosity, and electrochemical performance is discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Recent progress in hierarchically structured O2-cathodes for Li-O2 batteries10.1016/j.cej.2018.06.014 ↗
2. Study of a Li–air battery having an electrolyte solution formed by a mixture of an ether-based aprotic solvent and an ionic liquid10.1016/j.jpowsour.2012.04.038 ↗
3. Investigation of the O2 Electrochemistry in a polymer electrolyte solid-state cell10.1002/ange.201006264 ↗
4. Strategies toward high-performance cathode materials for lithium–oxygen batteries
5. Highly-porous Super-Growth carbon nanotube sheet cathode develops high-power Lithium-Air Batteries10.1016/j.electacta.2021.139415 ↗
6. Application of functionalized carbon nanotubes as the cathode of nonaqueous lithium-oxygen cells10.1016/j.ssi.2022.116007 ↗
7. Positive role of surface defects on carbon nanotube cathodes in overpotential and capacity retention of rechargeable lithium-oxygen batteries10.1021/am506564n ↗
8. A carbon powder-nanotube composite cathode for non-aqueous lithium-air batteries10.1016/j.electacta.2014.09.074 ↗
9. Influence of the cathode porosity on the discharge performance of the lithium–oxygen battery10.1016/j.jpowsour.2011.07.062 ↗
10. Optimization of air electrode for Li/air batteries10.1149/1.3314375 ↗
11. Effect of porosity on electrochemical properties of carbon materials as cathode for lithium-oxygen battery10.1016/j.jpowsour.2013.03.150 ↗
12. Investigation of the gas-diffusion-electrode used as lithium/air cathode in non-aqueous electrolyte and the importance of carbon material porosity10.1016/j.jpowsour.2009.10.012 ↗
13. Vertically aligned N-doped coral-like carbon fiber arrays as efficient air electrodes for high-performance nonaqueous Li-O2 batteries10.1021/nn500327p ↗
14. Electrochemical properties of large-discharge-capacity air electrodes with nickel foam sheet support for lithium air secondary batteries10.5796/electrochemistry.18-00045 ↗
15. A superhigh discharge capacity induced by a synergetic effect between high-surface-area carbons and a carbon paper current collector in a lithium–oxygen battery10.1088/1674-1056/24/8/088102 ↗
16. Chemical stability investigations of polyisobutylene as new binder for application in lithium air-batteries10.1016/j.electacta.2015.01.001 ↗
17. Screening for superoxide reactivity in Li-O 2 batteries: effect on Li 2O 2/LiOH crystallization10.1021/ja2111543 ↗
18. Investigation on the charging process of Li2O2-based air electrodes in Li–O2 batteries with organic carbonate electrolytes10.1016/j.jpowsour.2010.12.065 ↗
19. Carbon aerogel based materials for secondary batteries10.1016/j.susmat.2021.e00342 ↗
20. Constructing efficient polyimide(PI)/Ag aerogel photocatalyst by ethanol supercritical drying technique for hydrogen evolution10.1016/j.apsusc.2019.144187 ↗
21. Carbon aerogels as electrode material in supercapacitors10.1023/A:1009629423578 ↗
22. Synthesis, characterization and dielectric properties of one-step pyrolyzed/activated resorcinol-formaldehyde based carbon aerogels for electromagnetic interference shielding applications10.1016/j.matchemphys.2018.04.047 ↗
23. Supercritical, freezing and thermal drying process of resorcinol-formaldehyde polymer based nano-carbons and their highly loaded PtRu anode electrocatalyst for DMFC10.1002/elan.201900013 ↗
24. Low-temperature carbonized carbon nanotube/cellulose aerogel for efficient microwave absorption10.1016/j.compositesb.2021.108985 ↗
25. Tunable high-performance electromagnetic interference shielding of intrinsic N-doped chitin-based carbon aerogel10.1016/j.carbon.2022.07.016 ↗
26. Graphene-based nitrogen self-doped hierarchical porous carbon aerogels derived from chitosan for high performance supercapacitors10.1016/j.nanoen.2015.02.035 ↗
27. Preparation of lignin-based carbon aerogels as biomaterials for nano-supercapacitor10.3938/jkps.71.478 ↗
28. Preparation of pomelo peel-based biomass carbon aerogel-MnO2 composite electrode and its adsorption performance of Rb+ and Cs+10.52568/000978/JCSP/44.01.2022 ↗
29. Green synthesized carbon aerogel for electric double layer capacitor10.1016/j.est.2023.108533 ↗
30. Cotton derived carbonaceous aerogels for the efficient removal of organic pollutants and heavy metal ions10.1039/C5TA00299K ↗
31. Cellulose aerogels: synthesis, applications, and prospects10.3390/polym10060623 ↗
32. Dissolution state of cellulose in aqueous systems. 2. Acidic solvents10.1016/j.carbpol.2016.06.015 ↗
33. Superhydrophobic and superoleophilic graphene aerogel prepared by facile chemical reduction10.1039/C5TA00383K ↗
34. Electrocatalytic oxygen reduction by dopant-free, porous graphene aerogel10.1002/elan.201800089 ↗
35. The implementation of graphene-based aerogel in the field of supercapacitor10.1088/1361-6528/ac0190 ↗
36. Carbon nanotube aerogels10.1002/adma.200601748 ↗
37. Ultralight multiwalled carbon nanotube aerogel10.1021/nn102246a ↗
38. Co3O4/carbon aerogel hybrids as anode materials for lithium-ion batteries with enhanced electrochemical properties10.1021/am400952j ↗
39. Self-assembly of Fe2O3 nanorods in carbon nanotube network as a 3D aerogel architecture for lithium ion batteries10.1016/j.ceramint.2018.12.047 ↗
40. Controllable growth of MoS2/C flower-like microspheres with enhanced electrochemical performance for lithium ion batteries10.1016/j.jallcom.2016.02.253 ↗
41. Li, X., Cao, Y., Qi, W., Saraf, L. V, Xiao, J., Nie, Z., Mietek, J., Zhang, J.-G., Schwenzer, B., Liu, J.: Optimization of mesoporous carbon structures for lithium-sulfur battery applications †. https://doi.org/10.1039/c1jm12979a.10.1039/c1jm12979a ↗
42. Controlled synthesis of three-dimensional porous carbon aerogel via catalysts: effects of morphologies toward the performance of lithium-sulfur batteries10.1016/j.ssi.2020.115248 ↗
43. From double-helix structured seaweed to S-doped carbon aerogel with ultra-high surface area for energy storage10.1016/j.ensm.2018.08.004 ↗
44. A dual pore carbon aerogel based air cathode for a highly rechargeable lithium-air battery10.1016/j.jpowsour.2014.08.126 ↗
45. Effect of porosity on electrochemical properties of carbon materials as cathode for lithium-oxygen battery10.1016/j.jpowsour.2013.03.150 ↗
46. Synergy of polypyrrole and carbon x-aerogel in lithium–oxygen batteries10.1039/C7NR08494C ↗
47. High-performance Li–O2 batteries based on all-graphene backbone10.1002/adfm.202007218 ↗
48. A new type of sealed rechargeable lithium–lithium oxide battery based on reversible LiO 2/Li 2 O 2 interconversion10.1039/D2TA03314C ↗
49. The role of diamines in the formation of graphene aerogels10.3389/fmats.2018.00020 ↗
50. Polyvinyl alcohol (PVA)–cellulose nanofibril (CNF)–multiwalled carbon nanotube (MWCNT) hybrid organic aerogels with superior mechanical properties10.1039/c3ra42321b ↗
51. Low-cost carbon nanotube aerogels with varying and controllable density10.1007/s10971-016-4002-7 ↗
52. Carbon nanotube/PVA aerogels impregnated with PEI: solid adsorbents for CO2 capture10.1039/C8SE00089A ↗
53. Characterisation of commercially CVD grown multi-walled carbon nanotubes for paint applications10.1016/j.porgcoat.2015.09.020 ↗
54. Physisorption of gases by carbon blacks10.1016/0008-6223(94)90117-1 ↗
55. Synergistic effects of 2D graphene oxide nanosheets and 1D carbon nanotubes in the constructed 3D carbon aerogel for high performance pollutant removal10.1016/j.cej.2016.11.132 ↗
56. Comprehensive study on graphene hydrogels and aerogels synthesis and their ability of gold nanoparticles adsorption10.1016/j.colsurfa.2017.05.063 ↗
57. Why do lithium–oxygen batteries fail: parasitic chemical reactions and their synergistic effect10.1002/anie.201601783 ↗
58. Decoupling the cumulative contributions of capacity fade in ethereal-based Li-O2 batteries10.1021/acsami.9b07046 ↗
59. Challenges and strategy on parasitic reaction for high-performance nonaqueous lithium–oxygen batteries10.1002/aenm.202001789 ↗
60. Lithium-air batteries using hydrophobic room temperature ionic liquid electrolyte10.1016/j.jpowsour.2005.03.082 ↗
61. Discharge characteristic of a non-aqueous electrolyte Li/O2 battery10.1016/j.jpowsour.2009.08.088 ↗
62. Preparation of mesocellular carbon foam and its application for lithium/oxygen battery10.1016/j.elecom.2009.03.029 ↗