journal article·2024-03

Silicon particles confined in carbon nanotubes anode materials by green utilization of carbon dioxide in lithium-ion battery

Jinhui Li, Binglong Rui, Jinfu Zhao, Ruxiu He, Shuang Liu, Wenyue Shi, Xuxu Wang, Limin Chang, Yong Cheng, Ping Nie

Publisher page

Abstract

Silicon anodes are important candidates for high energy lithium-ion batteries (LIBs) because of their large theoretical specific capacity. However, silicon usually undergoes severe volume changes (300–400 %) in the lithiation/delithiation process, resulting in low Coulombic efficiency (CE) and rapid capacity decay. Herein, the nanotube shaped silicon-carbon composite has been designed by using a simple dealloying method in greenhouse gas (CO 2) environment. Encouragingly, the tubular structured composite prepared at 1.5 h shows best electrochemical performance as anodes for LIBs among the three samples. The first specific discharge capacity could reach 2302.5 mA h g −1 when cycled at 0.2 A g −1, corresponding an initial CE of 70 %. Along with the increasing number of cycles, the composite exhibits high Coulombic efficiency compared to commercial Si particles. The material also displays excellent rate capacity and stability with a high specific capacity of 714.6 mA h g −1 at 5 A g −1 . In situ differential electrochemical mass spectrometry is further used to analyze the phenomenon of gas generation during the formation of solid electrolyte interface layer. In addition, the fabricated Si/LiNi 0.3Co 0.3Mn 03O 2 full battery demonstrates high initial specific capacity up to 171 mA h g −1 as well as moderate cycling stability for 50 cycles.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Materials for sustainable energy10.1038/nmat4838 ↗
2. Multi-objective development path evolution of new energy vehicle policy driven by big data: from the perspective of economic-ecological-social10.1016/j.apenergy.2023.121065 ↗
3. Sustainable recycling technology for Li-ion batteries and beyond: challenges and future prospects10.1021/acs.chemrev.9b00535 ↗
4. Nanoscale phenomena in lithium-ion batteries10.1021/acs.chemrev.9b00405 ↗
5. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
6. A solid future for battery development10.1038/nenergy.2016.141 ↗
7. Regulating the carbon distribution of anode materials in lithium-ion batteries10.1039/D0NR09209F ↗
8. Functional nanostructuring for efficient energy conversion and storage10.1002/aenm.201600461 ↗
9. Recent progress in lithium-ion and lithium metal batteries10.1016/j.mencom.2022.05.001 ↗
10. Perspectives and challenges for future lithium-ion battery control and management10.1016/j.etran.2023.100260 ↗
11. A multifunctional polyimide enabled high performance silicon composite anode materials for Li-Ion batteries10.1016/j.jpowsour.2022.231124 ↗
12. Assembly: a key enabler for the construction of superior silicon-based anodes10.1002/advs.202203162 ↗
13. Accordion frameworks enable free-standing, high Si content anode for Li-ion batteries10.1002/eem2.12400 ↗
14. Natural sesbania gum as an efficient biopolymer binder for high-performance Si-based anodes in lithium-ion batteries10.1016/j.jpowsour.2022.231604 ↗
15. Issues impeding the commercialization of laboratory innovations for energy-dense Si-containing lithium-ion batteries10.1038/s41560-023-01333-5 ↗
16. In-situ construction of cellulose acetate propionate-based hybrid gel polymer electrolyte for high-performance lithium metal batteries10.1016/j.indcrop.2023.117395 ↗
17. Porous current collector enables carbon superior electrochemical performance for K-ion capacitors10.1007/s12598-022-02111-0 ↗
18. Electrolyte design for lithium-ion batteries with a cobalt-free cathode and silicon oxide anode10.1038/s41893-023-01237-y ↗
19. Tailoring chemical composition of solid electrolyte interphase by selective dissolution for long-life micron-sized silicon anode10.1038/s41467-023-43093-6 ↗
20. Nanomaterials in the future of energy research
21. Advanced silicon nanostructures derived from natural silicate minerals for energy storage and conversion10.1016/j.gee.2021.04.001 ↗
22. Nanowires for energy: a review10.1063/1.5054842 ↗
23. Nanowire-on-Nanowire: all-nanowire electronics by on-demand selective integration of hierarchical heterogeneous nanowires10.1021/acsnano.7b06098 ↗
24. Aligned carbon nanotubes for lithium-ion batteries: a review10.1007/s12274-023-6006-2 ↗
25. Nitrogen-doped hierarchically porous carbonaceous nanotubes for lithium ion batteries10.1016/j.cej.2018.06.057 ↗
26. Small highly mesoporous silicon nanoparticles for high performance lithium ion based energy storage10.1016/j.cej.2020.125958 ↗
27. Si@nitrogen-doped porous carbon derived from covalent organic framework for enhanced Li-storage10.1016/j.jcis.2022.12.058 ↗
28. Si-based anode with hierarchical protective function and hollow ring-like carbon matrix for high performance lithium ion batteries10.1016/j.apsusc.2018.11.065 ↗
29. Magnesiothermic reduction improved route to high-yield synthesis of interconnected porous Si@C networks anode of lithium ions batteries10.1016/j.ensm.2021.12.017 ↗
30. From wood pulp fibers to tubular SiO2/C composite as anode for Li-ion battery: in-situ regulation of cellulose microfibrils by alkali solution10.1016/j.indcrop.2020.113022 ↗
31. An interconnected and scalable hollow Si-C nanospheres/graphite composite for high-performance lithium-ion batteries10.1016/j.jcis.2022.05.135 ↗
32. Electrochemically converting micro-sized industrial Si/FeSi2 to nano Si/FeSi for the high-performance lithium-ion battery anode
33. A self-driven alloying/dealloying approach to nanostructuring micro-silicon for high-performance lithium-ion battery anodes10.1016/j.ensm.2020.10.021 ↗
34. Scalable synthesis of ant-nest-like bulk porous silicon for high-performance lithium-ion battery anodes10.1038/s41467-019-09510-5 ↗
35. Green, scalable, and controllable fabrication of nanoporous silicon from commercial alloy precursors for high-energy lithium-ion batteries10.1021/acsnano.8b02219 ↗
36. Green and facile fabrication of nanoporous silicon@carbon from commercial alloy with high graphitization degree for high-energy lithium-ion batteries
37. Dealloying synthesis of silicon nanotubes for high-performance lithium ion batteries10.1002/cphc.202200233 ↗
38. Surface and interface engineering of silicon-based anode materials for lithium-ion batteries10.1002/aenm.201701083 ↗
39. Deciphering the interface of a high-voltage (5 V-class) Li-ion battery containing additive-assisted sulfolane-based electrolyte10.1002/smtd.201900546 ↗
40. A new type of sealed rechargeable lithium–lithium oxide battery based on reversible LiO2/Li2O2 interconversion10.1039/D2TA03314C ↗
41. Lithium batteries and the solid electrolyte interphase (SEI)—progress and outlook10.1002/aenm.202203307 ↗
42. Tracing the impact of hybrid functional additives on a high-voltage (5 V-class) SiOx-C/LiNi0.5Mn1.5O4 Li-ion battery system10.1021/acs.chemmater.8b03764 ↗
43. Graphene caging silicon particles for high-performance lithium-ion batteries10.1002/smll.201800635 ↗
44. Prelithiated surface oxide layer enabled high-performance Si anode for lithium storage10.1021/acsami.8b22507 ↗