A well-matched MgNiO2 surface heterointerface layer to enhance the cycling stability of cobalt-free Li-rich Mn-based cathode materials
Source abstract
Abstract
The instability of lattice oxygen and the resulting chain reactions mainly originate at the interface between the electrolyte and the outmost surface of Li-rich Mn-based cathode materials (LRM). Although many research works are focused on improving the cycling performances of LRM by surface protection, the issue of voltage fading is still severing. To overcome the challenge, the MgNiO 2 surface heterointerface layer is constructed on the surface of cobalt-free LRM to form a heterointerface in this work, which can suppress side reactions at the interface, inhibit the dissolution of Mn elements, enhance the lattice oxygen stability, and stabilize the crystal structure. Benefiting from the above merits, the voltage fading value of the modified sample has been decreased by 28.2%. And the specific capacity retention of the modified sample (92.9%) is significantly higher than that of the pristine sample (80.9%). This work provides a valuable idea for optimizing the surface to improve the electrochemical performance of high-specific capacity Li-rich cathode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Strain-retardant coherent perovskite phase stabilized Ni-rich cathode10.1038/s41586-022-05238-3 ↗
2. Compositionally complex doping for zero-strain zero-cobalt layered cathodes10.1038/s41586-022-05115-z ↗
3. Sb@Ni6 superstructure units stabilize Li-rich layered cathode in the wide voltage window10.1016/j.jpowsour.2022.232148 ↗
4. Origin of structural degradation in Li-rich layered oxide cathode10.1038/s41586-022-04689-y ↗
5. Improving the oxygen redox reversibility of Li-rich battery cathode materials via Coulombic repulsive interactions strategy10.1038/s41467-022-28793-9 ↗
6. Recent developments and challenges of Li-rich Mn-based cathode materials for high-energy lithium-ion batteries
7. Persistent and partially mobile oxygen vacancies in Li-rich layered oxides10.1038/s41560-021-00832-7 ↗
8. Releasing oxygen from the bulk10.1038/s41560-021-00834-5 ↗
9. Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release10.1038/s41560-018-0207-z ↗
10. Revealing grain-boundary-induced degradation mechanisms in Li-rich cathode materials10.1021/acs.nanolett.9b04620 ↗
11. Challenges and recent advances in high capacity Li-rich cathode materials for high energy density lithium-ion batteries10.1002/adma.202005937 ↗
12. Li-rich cathodes for rechargeable Li-based batteries: reaction mechanisms and advanced characterization techniques10.1039/D0EE01694B ↗
13. Local electric-field-driven fast Li diffusion kinetics at the piezoelectric LiTaO3 modified Li-rich cathode-electrolyte interphase10.1002/advs.201902538 ↗
14. Stabilized Co-free Li-rich oxide cathode particles with an artificial surface prereconstruction10.1002/aenm.202001120 ↗
15. Improving the electrochemical performance of Li-rich Li1.2Ni0.2Mn0.6O2 by using Ni-Mn oxide surface modification10.1016/j.jpowsour.2018.04.034 ↗
16. Mitigating voltage decay of Li-rich layer oxide cathode material via an ultrathin “lithium ion pump” heteroepitaxial surface modification10.1016/j.jpowsour.2021.230427 ↗
17. Inhibiting oxygen release from Li-rich, Mn-rich layered oxides at the surface with a solution processable oxygen scavenger polymer10.1002/aenm.202100552 ↗
18. Enhancing cycling stability in Li-rich Mn-based cathode materials by solid-liquid-gas integrated interface engineering10.1016/j.nanoen.2022.107201 ↗
19. Tailoring bulk Li+ ion diffusion kinetics and surface lattice oxygen activity for high-performance lithium-rich manganese-based layered oxides10.1016/j.ensm.2021.02.025 ↗
20. Li4V2Mn(PO4)4-stablized Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode materials for lithium ion batteries10.1016/j.nanoen.2019.103889 ↗
21. Highly stable Li1.2Mn0.54Co0.13Ni0.13O2 enabled by novel atomic layer deposited AlPO4 coating10.1016/j.nanoen.2017.02.015 ↗
22. Surface structure decoration of high capacity Li1.2Mn0.54Ni0.13Co0.13O2 cathode by mixed conductive coating of Li1.4Al0.4Ti1.6(PO4)3 and polyaniline for lithium-ion batteries10.1016/j.jpowsour.2019.05.044 ↗
23. The role of AlF3 coatings in improving electrochemical cycling of Li-enriched nickel-manganese oxide electrodes for Li-ion batteries10.1002/adma.201104106 ↗
24. Functioning mechanism of AlF3 coating on the Li- and Mn-rich cathode materials10.1021/cm502071h ↗
25. Design of surface protective layer of LiF/FeF3 nanoparticles in Li-rich cathode for high-capacity Li-ion batteries10.1016/j.nanoen.2015.04.013 ↗
26. In situ formation of LiF decoration on a Li-rich material for long-cycle life and superb low-temperature performance10.1039/C9TA02461A ↗
27. Dielectric polarization in inverse spinel-structured Mg2TiO4 coating to suppress oxygen evolution of Li-rich cathode materials10.1002/adma.202000496 ↗
28. Phase compatible NiFe2O4 coating tunes oxygen redox in Li-rich layered oxide10.1021/acsnano.1c02023 ↗
29. Structural and electrochemical study of Al2O3 and TiO2 coated Li1.2Ni0.13Mn0.54Co0.13O2 cathode material using ALD10.1002/aenm.201300269 ↗
30. Insight of a phase compatible surface coating for long-durable Li-rich layered oxide cathode10.1002/aenm.201901795 ↗
31. Achieving high initial coulombic efficiency and low voltage dropping in Li-rich Mn-based cathode materials by metal-organic frameworks-derived coating10.1016/j.jpowsour.2021.229967 ↗
32. Nucleation of dislocations and their dynamics in layered oxide cathode materials during battery charging10.1038/s41560-018-0184-2 ↗
33. Elucidating the effect of iron doping on the electrochemical performance of cobalt-free lithium-rich layered cathode materials10.1002/aenm.201902445 ↗
34. Ti-gradient doping to stabilize layered surface structure for high performance high-Ni oxide cathode of Li-ion battery10.1002/aenm.201901756 ↗
35. Direct visualization of the reversible O2-/O- redox process in Li-rich cathode materials10.1002/adma.201705197 ↗
36. A universal strategy toward the precise regulation of initial Coulombic efficiency of Li-rich Mn-based cathode materials10.1002/adma.202103173 ↗
37. Suppressing surface lattice oxygen release of Li-rich cathode materials via heterostructured spinel Li4Mn5O12 coating10.1002/adma.201801751 ↗
38. Utilization of magnesium resources in salt lake brine and catalytic degradation of dye wastewater by doping cobalt and nickel10.1016/j.seppur.2021.118808 ↗
39. First-cycle voltage hysteresis in Li-rich 3d cathodes associated with molecular O2 trapped in the bulk10.1038/s41560-020-00697-2 ↗
40. Double-shell Li-rich layered oxide hollow microspheres with sandwich-like carbon@spinel@layered@spinel@carbon shells as high-rate lithium ion battery cathode10.1016/j.nanoen.2019.02.040 ↗
41. Electrolyte design enabling a high-safety and high-performance Si anode with a tailored electrode-electrolyte interphase10.1002/adma.202103178 ↗