journal article·2023-10

A Fast Activation Energy Derivation (FAED) approach for Lumped Single Particle model in lithium-ion battery module-level heat generation prediction

Haosong He, Xiangjie Chen, Ashley Fly, Vishal Saini

Publisher page

Abstract

The performance of electric vehicles (EVs) heavily relies on the durability and longevity of lithium-ion cells, which are strongly affected by operating temperatures. Various electrochemical models have been developed to investigate the impact of operating temperature on the dynamic heat generation at cell level. Among these, the Lumped Single Particle (LSP) model stands out due to its lower computational cost and higher accuracy under > 1 C-rates. However, key electrochemical parameters (i.e. the ohmic overpotential, exchange current, and diffusion time constant) in the LSP model are temperature-sensitive, requiring Arrhenius dependencies. Conventional activation energy measuring approaches, relying on testing under discrete fixed temperatures to obtain activation energies, are time-consuming. To address this, this paper proposes a FAED approach that fits the temperature-sensitive parameters and corresponding activation energies to experimental data with a single discharge process, reducing the testing time to a minimum of one hour. This approach was experimentally validated on a Tesla battery module (74P6S), demonstrating a good agreement between simulation and experimental results up to 1.5 C-rates, ranging from 16 ℃ to 46 ℃. Furthermore, this approach is suitable for cells with different lithium chemistries, formats, and properties, making it an effective method for thermal analysis of EV packs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. A technical review of modeling techniques for urban solar mobility: Solar to buildings, vehicles, and storage (S2BVS)10.3390/su12177035 ↗
2. Formulating energy density for designing practical lithium–sulfur batteries10.1038/s41560-022-01001-0 ↗
3. Rational design of prussian blue analogues as conversion anodes for lithium-ion batteries with high capacity and long cycle life10.1016/j.jallcom.2021.161867 ↗
4. Investigation of self-discharge properties and a new concept of open-circuit voltage drop rate in lithium-ion batteries10.1007/s10008-021-05049-y ↗
5. Investigation on the promotion of temperature uniformity for the designed battery pack with liquid flow in cooling process10.1016/j.applthermaleng.2017.01.069 ↗
6. Temperature effect and thermal impact in lithium-ion batteries: A review10.1016/j.pnsc.2018.11.002 ↗
7. 3-D CFD modeling and experimental testing of thermal behavior of a Li-ion battery10.1016/j.applthermaleng.2017.04.017 ↗
8. Heat generation rate measurement in a Li-ion cell at large C-rates through temperature and heat flux measurements10.1016/j.jpowsour.2015.03.008 ↗
9. Comparison of lumped diffusion models for voltage prediction of a lithium-ion battery cell during dynamic loads10.1016/j.jpowsour.2018.09.020 ↗
10. In-situ measurement of the heat generation of LiFePO4 and Li (Ni1/3Co1/3Mn1/3) O2 batteries10.1016/j.jpowsour.2023.233187 ↗
11. An improved Thevenin model of lithium-ion battery with high accuracy for electric vehicles10.1016/j.apenergy.2019.113615 ↗
12. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
13. Single-particle model for a lithium-ion cell: Thermal behavior10.1149/1.3521314 ↗
14. A comparative study of global optimization methods for parameter identification of different equivalent circuit models for Li-ion batteries10.1016/j.electacta.2018.11.134 ↗
15. Experimental identification using equivalent circuit model for lithium-ion battery
16. Multi-dimensional modeling of large-scale lithium-ion batteries10.1016/j.jpowsour.2013.09.103 ↗
17. The state of health estimation of lithium-ion batteries based on data-driven and model fusion method10.1016/j.jclepro.2022.132742 ↗
18. A systematic review of lumped-parameter equivalent circuit models for real-time estimation of lithium-ion battery states10.1016/j.jpowsour.2016.03.042 ↗
19. A comprehensive equivalent circuit model for lithium-ion batteries, incorporating the effects of state of health, state of charge, and temperature on model parameters10.1016/j.est.2021.103252 ↗
20. Investigation on lithium ion battery equivalent circuit models for dynamic load profiles10.1002/est2.231 ↗
21. Determination of the hydrogen diffusion coefficient in metal hydrides by impedance spectroscopy10.1016/S0378-7753(98)00092-5 ↗
22. Extension of physics-based single particle model for higher charge–discharge rates10.1016/j.jpowsour.2012.09.084 ↗
23. Sarmiento-Carnevali · 2020
24. Csomós · 2020
25. Electrochemical modeling of a thermal management system for cylindrical lithium-ion battery pack considering battery capacity fade10.1016/j.csite.2022.101878 ↗
26. batP2dFoam: An efficient segregated solver for the pseudo-2-dimensional (P2D) model of Li-ion batteries10.1149/1945-7111/acbfe4 ↗
27. A simplified electrochemical model for modelling Li-ion batteries comprising blend and bidispersed electrodes for high power applications10.1016/j.jpowsour.2020.228766 ↗
28. Modeling NCA/C6-Si battery ageing10.1016/j.electacta.2022.141077 ↗
29. Parameter sensitivity analysis of a physico-chemical lithium-ion battery model with combined discharge voltage and electrochemical impedance data10.1016/j.jpowsour.2022.231125 ↗
30. A systematic approach for electrochemical-thermal modelling of a large format lithium-ion battery for electric vehicle application10.1016/j.jpowsour.2018.02.027 ↗
31. Modified electrochemical parameter estimation of NCR18650BD battery using implicit finite volume method10.1016/j.jpowsour.2016.12.023 ↗
32. Simplified electrochemical lithium-ion battery model with variable solid-phase diffusion and parameter identification over wide temperature range10.1016/j.jpowsour.2021.229900 ↗
33. A numerically efficient method of solving the full-order pseudo-2-dimensional (P2D) Li-ion cell model10.1016/j.jpowsour.2021.229571 ↗
34. Non-destructive parameter extraction for a reduced order lumped electrochemical-thermal model for simulating Li-ion full-cells10.1016/j.jpowsour.2019.227296 ↗
35. A reduced-order lumped model for Li-ion battery packs during operation10.1149/1945-7111/ac2dcb ↗
36. Madsen · 2004
37. Numerical study of flow and heat transfer performance of 3D-printed polymer-based battery thermal management10.1016/j.ijheatmasstransfer.2020.119995 ↗
38. The analysis on the battery thermal management system with composite phase change materials coupled air cooling and fins10.1016/j.est.2022.105977 ↗
39. Method for evaluating laser welding quality of battery module based on coupling model10.1016/j.jpowsour.2022.231959 ↗
40. Combined numerical and experimental studies of 21700 lithium-ion battery thermal runaway induced by different thermal abuse10.1016/j.ijheatmasstransfer.2022.123099 ↗
41. A comprehensive study to the assessment of Arrhenius activation energy and binary chemical reaction in swirling flow10.1038/s41598-020-64712-y ↗
42. Francis Le Roux, Henk Jan Bergveld, M.C.F. (Tijs) Donkers, Improved Parameter Estimation of the Doyle-FullerNewmann model by Incorporating Temperature Dependence, in: IFAC World Congres, 2023, 22nd World Congress of the International Federation of Automatic Control (IFAC 2023 World Congress) ; Conference date: 09-07-2023 Through 14-07-2023.
43. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell10.1149/2.057207jes ↗
44. Development of experimental techniques for parameterization of multi-scale lithium-ion battery models10.1149/1945-7111/ab9050 ↗
45. Numerical investigation of cooling performance of a novel air-cooled thermal management system for cylindrical Li-ion battery module
46. Numerical investigation on the thermal management of lithium-ion battery system and cooling effect optimization10.1016/j.applthermaleng.2022.118966 ↗
47. Integration of computational fluid dynamics and artificial neural network for optimization design of battery thermal management system10.3390/batteries8070069 ↗
48. An experimentally-verified thermal-electrochemical simulation model of a 21700 cell using a lumped semi-empirical battery model
49. Panasonic · 2020
50. Aging of tesla’s 18650 lithium-ion cells: Correlating solid-electrolyte-interphase evolution with fading in capacity and power10.1149/2.0171714jes ↗
51. Multicell state estimation using variation based sequential Monte Carlo filter for automotive battery packs10.1016/j.jpowsour.2014.12.010 ↗
52. Adaptive unscented Kalman filtering for state of charge estimation of a lithium-ion battery for electric vehicles10.1016/j.energy.2011.03.059 ↗
53. 3 - thermal modeling, analysis, and design
54. Determination of the through-plane thermal conductivity and specific heat capacity of a Li-ion cylindrical cell10.1016/j.ijheatmasstransfer.2020.120330 ↗
55. A general energy balance for battery systems10.1149/1.2113792 ↗
56. Battery entropic heating coefficient testing and use in cell-level loss modeling for extreme fast charging10.4271/2020-01-0862 ↗
57. Theory for the lumped battery interface
58. Optimization module user’s guide
59. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation10.1016/j.jpowsour.2010.12.102 ↗
60. Prediction of overcharge-induced serious capacity fading in nickel cobalt aluminum oxide lithium-ion batteries using electrochemical impedance spectroscopy10.1016/j.jpowsour.2020.228168 ↗
61. An investigation on electrical and thermal characteristics of cylindrical lithium-ion batteries at low temperatures10.1016/j.energy.2021.120223 ↗
62. Parametric study of solid oxide fuel cell performance10.1016/j.enconman.2006.11.016 ↗
63. Temperature dependence of pitting potentials for austenitic stainless steels above their critical pitting temperature10.1016/S0010-938X(98)00020-1 ↗
64. A macro-level model for determining the performance characteristics of solid oxide fuel cells10.1016/j.jpowsour.2004.06.051 ↗
65. System dynamics and metrics of an electrochemical refrigerator based on the Brayton cycle
66. Heat loss distribution: Impedance and thermal loss analyses in LiFePO4/graphite 18650 electrochemical cell10.1016/j.jpowsour.2016.08.045 ↗