journal article·2023-06Open access

Predicting the cost of a 24 V soluble lead flow battery optimised for PV applications

Diarmid Roberts, Ewan J. Fraser, Andrew Cruden, Richard G. Wills, Solomon Brown

Abstract

Providing reliable electricity from small-scale renewable power is an important challenge for emerging economies. The soluble lead flow battery (SLFB) is a promising battery for this application, as it has a simple architecture making it relatively robust, and a lifetime of 2000 cycles demonstrated at the cell level. Also, the electrolyte is manufacturable directly from spent lead acid batteries. There is a need for techno-economic models to allow the cost/performance of a complete system to be defined and optimised. Such a model is defined here for the first time and used in a multi-objective optimisation to design a 24 V system for a charging hub in Sierra Leone. A 4 h duration was found to be optimal, and electrolyte for a 3.5 kW/14 kWh system would fit in a 1000 L IBC. Methanesulfonic acid was found to be the largest cost component of the 4 h system, with graphitic bipolar plates next. Both have low raw material costs, and in an optimistic scenario a total component cost of <£50/kWh would be achieved, half that of current NMC Li-ion cells. The greatest technical risk to achieving low cost is deposit thickness of lead dioxide. This important research gap should be addressed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Hybrid Renewable Energy Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Sterner · 2019
2. Developments in soluble lead flow batteries and remaining challenges: an illustrated review10.1016/j.est.2017.10.020 ↗
3. Developing electrolyte for a soluble lead redox flow battery by reprocessing spent lead acid battery electrodes10.3390/batteries3020015 ↗
4. Performance of recovered and reagent grade electrolyte in a soluble lead redox cell
5. PbO2/Pb2+ cycling in methanesulfonic acid and mechanisms associated for soluble lead-acid flow battery applications10.1016/j.electacta.2012.03.116 ↗
6. Environmental benefits of methanesulfonic acid: comparative properties and advantages10.1039/a900157c ↗
7. Achieving high efficiency and cyclability in inexpensive soluble lead flow batteries10.1039/c3ee40631h ↗
8. A mathematical model for the soluble lead-acid flow battery10.1149/1.3328520 ↗
9. Modelling of effect of non-uniform current density on the performance of soluble lead redox flow batteries10.1149/2.0281410jes ↗
10. A two dimensional numerical model of the membrane-divided soluble lead flow battery10.1016/j.egyr.2021.02.056 ↗
11. Pump-less, free-convection-driven redox flow batteries: modelling, simulation, and experimental demonstration for the soluble lead redox flow battery10.1016/j.jpowsour.2020.227918 ↗
12. Optimization and analysis of high-power hydrogen/bromine-flow batteries for grid-scale energy storage10.1002/ente.201300108 ↗
13. Cost and performance model for redox flow batteries10.1016/j.jpowsour.2012.12.023 ↗
14. Reed · 2016
15. Comparative analysis for various redox flow batteries chemistries using a cost performance model10.1016/j.jpowsour.2015.05.066 ↗
16. Enhancing frequency response of wind farms using hybrid energy storage systems
17. Flow batteries for energy management: novel algebraic modelling approaches to properly assess their value10.1016/j.est.2019.100977 ↗
18. Optimal sizing of a vanadium redox battery system for microgrid systems10.1109/TSTE.2015.2404780 ↗
19. Photovoltaic geographical information system (PVGIS) - European commission
20. The challenges of achieving a 100% renewable electricity system in the United States10.1016/j.joule.2021.03.028 ↗
21. A fast and elitist multiobjective genetic algorithm: NSGA-II10.1109/4235.996017 ↗
22. Pymoo: multi-objective optimization in Python10.1109/ACCESS.2020.2990567 ↗
23. A technique for calculating shunt leakage and cell currents in bipolar stacks having divided or undivided cells10.1149/1.2119891 ↗
24. The combined impact of trimethyloctadecylammonium chloride and sodium fluoride on cycle life and energy efficiency of soluble lead-acid flow battery10.1016/j.est.2022.105243 ↗
25. A novel flow battery: a lead acid battery based on an electrolyte with soluble lead(II): Part II. Flow cell studies10.1039/b401116c ↗
26. The separator-divided soluble lead flow battery10.1007/s10800-018-1230-2 ↗
27. The performance of a soluble lead-acid flow battery and its comparison to a static lead-acid battery10.1016/j.enconman.2011.07.006 ↗
28. Thompson Inc
29. Muthu · 2017
30. Modeling the performance of a zinc/bromine flow battery10.3390/en12061159 ↗
31. Environmental assessment of alternative methanesulfonic acid production using direct activation of methane10.1016/j.jclepro.2018.07.284 ↗
32. Estimating the system price of redox flow batteries for grid storage10.1016/j.jpowsour.2015.07.004 ↗
33. Fraunhofer Umsicht
34. A novel flow battery: a lead acid battery based on an electrolyte with soluble lead(II). Part IX: electrode and electrolyte conditioning with hydrogen peroxide10.1016/j.jpowsour.2009.10.109 ↗
35. Rackley · 2022
36. A submillimeter bundled microtubular flow battery cell with ultrahigh volumetric power density