Safety and performance enhanced boehmite-coupled polyethylene nanocomposite separator for lithium-ion batteries by synergetic effects of silane treatment and electron irradiation
Source abstract
Abstract
Separators are among the key components affecting both the safety and performance of batteries. Herein, boehmite-coupled high-density polyethylene (HDPE) nanocomposite separators with enhanced safety and performance are prepared via silane treatments and electron irradiation. The silane treatment of boehmite nanoparticles (BNPs) leads to the homogeneous dispersion of the BNPs in HDPE owing to the spacer alkyl groups in silane. Electron irradiation induces chemical coupling between the silane-treated BNPs and HDPE, as well as the crosslinking of HDPE. Electron irradiation also oxidizes HDPE, improving the electrolyte affinity of the separators. Consequently, the safety and performance of the separators are significantly improved, and the degree of improvement depends on the type of silane. A nanocomposite separator comprising octadecyl-functionalized BNPs exhibits superior dimensional stability (puncture strength of 0.74 N μm −1 and thermal shrinkage of 3.2% at 140 °C for 30 min). In addition, a nanocomposite separator comprising aminopropyl-functionalized BNPs demonstrates excellent ionic conductivity (1.61 mS cm −1). A lithium-ion cell assembled with the nanocomposite separator has an exceptional rate capability (discharge capacity at 20 C maintains 72.9% of the capacity at 0.5 C) and cyclic stability (discharge capacity retention of 96.2% with a Coulombic efficiency of 99.5% after 100 charge/discharge cycles at 0.5 C).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
2. Recent developments in lithium ion batteries10.1016/S0927-796X(01)00030-4 ↗
3. Separators for lithium-ion batteries: a review on the production processes and recent developments10.1002/ente.201402215 ↗
4. Improving battery safety by early detection of internal shorting with a bifunctional separator10.1038/ncomms6193 ↗
5. High performance separator coated with amino-functionalized SiO2 particles for safety enhanced lithium-ion batteries10.1016/j.memsci.2017.04.042 ↗
6. A nonflammable and thermotolerant separator suppresses polysulfide dissolution for safe and long-cycle lithium-sulfur batteries10.1002/aenm.201802441 ↗
7. Separator technologies for lithium-ion batteries10.1007/s10008-010-1264-9 ↗
8. Safer lithium-ion batteries from the separator aspect: development and future perspectives10.1002/eem2.12129 ↗
9. A review of lithium ion battery failure mechanisms and fire prevention strategies10.1016/j.pecs.2019.03.002 ↗
10. Novel ceramic-grafted separator with highly thermal stability for safe lithium-ion batteries10.1021/acsami.7b05535 ↗
11. Lithium ion battery separators: Development and performance characterization of a composite membrane10.1016/j.memsci.2012.09.027 ↗
12. Recent progress in thin separators for upgraded lithium ion batteries10.1016/j.ensm.2021.07.028 ↗
13. Ionic liquids as electrolytes for Li-ion batteries—an overview of electrochemical studies10.1016/j.jpowsour.2009.06.089 ↗
14. Bifunctional separators design for safe lithium-ion batteries: suppressed lithium dendrites and fire retardance10.1016/j.nanoen.2022.107204 ↗
15. Renewable and superior thermal-resistant cellulose-based composite nonwoven as lithium-ion battery separator10.1021/am302290n ↗
16. Hybrid separator containing reactive, nanostructured alumina promoting in-situ gel electrolyte formation for lithium-ion batteries with good cycling stability and enhanced safety10.1016/j.jpowsour.2020.228519 ↗
17. An inorganic composite membrane as the separator of Li-ion batteries10.1016/j.jpowsour.2004.07.034 ↗
18. Improving ionic conductivity and lithium-ion transference number in lithium-ion battery separators10.1021/acsami.6b12085 ↗
19. Sustainable separators for high-performance lithium ion batteries enabled by chemical modifications
20. Carboxylated polyimide separator with excellent lithium ion transport properties for a high-power density lithium-ion battery10.1039/C7TA08702K ↗
21. Recent advances and perspectives on thin electrolytes for high-energy-density solid-state lithium batteries10.1039/D0EE02714F ↗
22. Lithium-ion battery separators for ionic-liquid electrolytes: a review10.1002/adma.201904205 ↗
23. Low-Cost and large-scale fabricating technology for high-performance lithium-ion battery composite separators with connected nano-Al2O3 coating10.1021/acsaem.1c03137 ↗
24. Recent advances in lithium-ion battery separators with enhanced safety, 60 Years of the10.1016/B978-0-323-89977-2.00025-7 ↗
25. Enhancement of thermal stability and cycling performance in lithium-ion cells through the use of ceramic-coated separators10.1016/j.jpowsour.2009.11.020 ↗
26. Development and characterization of silica tube-coated separator for lithium ion batteries10.1016/j.jpowsour.2015.02.126 ↗
27. Comparative study of the adhesion properties of ceramic composite separators using a surface and interfacial cutting analysis system for lithium-ion batteries10.1021/acsomega.7b00493 ↗
28. Ceramic coated polypropylene separators for lithium-ion batteries with improved safety: effects of high melting point organic binder10.1039/C6RA04522G ↗
29. Lithium metal anodes for rechargeable batteries10.1039/C3EE40795K ↗
30. Rubber–filler interactions and rheological properties in filled compounds10.1016/S0079-6700(01)00040-5 ↗
31. Comparison to mechanical properties of epoxy nanocomposites reinforced by functionalized carbon nanotubes and graphene nanoplatelets10.1016/j.compositesb.2018.11.011 ↗
32. Al-O-Si bond formation in boehmite-fumed silica mixtures during mechanochemical activation10.1007/BF03401087 ↗
33. Chemical modification and characterization of boehmite particles10.23939/chcht02.01.027 ↗
34. J. Mechanical properties of epoxy resins reinforced with synthetic boehmite (AlOOH) nanosheets10.1002/app.41409 ↗
35. Song · 2005
36. Local conformation and relaxation of polystyrene at substrate interface10.1021/ma3007202 ↗
37. Investigations of the effect of curing conditions on the structure and stability of amino-functionalized organic films on silicon substrates by Fourier transform infrared spectroscopy, ellipsometry, and fluorescence microscopy10.1016/j.susc.2008.09.001 ↗
38. Surface functionalization of WO3 thin films with (3-aminopropyl)triethoxysilane and succinic anhydride10.1007/s11664-017-5408-x ↗
39. Enhancement of meltdown temperature of the polyethylene lithium-ion battery separator via surface coating with polymers having high thermal resistance10.1021/ie900096z ↗
40. Gases liberated during the high voltage electron irradiation of polyethylene10.1021/ja01642a018 ↗
41. High-density polyethylene dosimetry by transvinylene FTIR analysis10.1016/S0969-806X(99)00324-2 ↗
42. Effects of cross-linking methods for polyethylene-based carbon fibers: review10.5714/CL.2015.16.3.147 ↗
43. Oxidation of polyethylene under irradiation at low temperature and low dose rate. Part II. Low temperature thermal oxidation10.1016/j.polymdegradstab.2005.09.012 ↗
44. Preparation of hydrophilic polyethylene/methylcellulose blend microporous membranes for separator of lithium-ion batteries10.1016/j.memsci.2015.09.064 ↗
45. Polyethylene separator activated by hybrid coating improving Li+ ion transference number and ionic conductivity for Li-metal battery10.1016/j.jpowsour.2017.01.006 ↗
46. Modeling and applications of electrochemical impedance spectroscopy (EIS) for lithium-ion batteries10.33961/jecst.2019.00528 ↗