Pore network modeling of a microporous layer for polymer electrolyte fuel cells under wet conditions
Source abstract
Abstract
The gas diffusion layers (GDLs) of polymer electrolyte fuel cells have been developed with applying microporous layers (MPLs) in their catalyst layer (CL) side to alleviate the accumulation of liquid water in the CL for oxygen transport to the cathode CL. A three-dimensional porous structure of our in-house hydrophobic MPL is numerically modeled with a pore network model (PNM). The convective air permeability and oxygen diffusivity, which depend on liquid saturation, are evaluated. To construct the PNM, focused ion beam scanning electron microscopy (FIB-SEM) is used to derive the pore size distribution (PSD). The model is ex-situ validated through air permeability and oxygen diffusivity tests with controlled saturation of non-volatile wetting liquid that is stable in the hydrophobic MPL. Oxygen diffusivity of the MPL is obtained by identifying the diffusion resistances of the concentration boundary layers and GDL substrate in the tests. The model predicts the effects of liquid water saturation in the MPL on the air and liquid water permeations, and the oxygen diffusion, and thus can be used to design optimal PSDs for practical cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Direct water balance analysis on a polymer electrolyte fuel cell (PEFC): Effects of hydrophobic treatment and micro-porous layer addition to the gas diffusion layer of a PEFC on its performance during a simulated start-up operation10.1016/j.jpowsour.2007.06.004 ↗
2. Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells10.1016/j.jpowsour.2009.10.089 ↗
3. Water management in a PEMFC: Water transport mechanism and material degradation in gas diffusion layers10.1002/fuce.201000172 ↗
4. Novel superhydrophobic microporous layers for enhanced performance and efficient water management in PEM fuel cells10.1016/j.ijhydene.2013.12.199 ↗
5. Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2013.10.066 ↗
6. Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2015.02.115 ↗
7. Application of a self-supporting microporous layer to gas diffusion layers of proton exchange membrane fuel cells10.1016/j.jpowsour.2016.12.064 ↗
8. Analysis of water transport inside hydrophilic carbon fiber micro-porous layers with high-performance operation in PEFC10.1149/2.0801807jes ↗
9. Improving water management in fuel cells through microporous layer modifications: Fast operando tomographic imaging of liquid water10.1016/j.jpowsour.2019.226809 ↗
10. Superhydrophobic fluorinated carbon powders for improved water management in hydrogen fuel cells10.1016/j.jpowsour.2022.232098 ↗
11. Construction of the microporous layer in the PEFC by pore network modeling10.1299/jsmepes.2018.23.C114 ↗
12. Mass transfer in microporous layers for polymer electrolyte fuel cells analyzed with pore network modeling10.1149/10408.0129ecst ↗
13. Pore network modeling of fibrous gas diffusion layers for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2007.04.059 ↗
14. Scale effect and two-phase flow in a thin hydrophobic porous layer. application to water transport in gas diffusion layers of proton exchange membrane fuel cells10.1016/j.jpowsour.2009.02.090 ↗
15. Evaluation of gas diffusion performance in wet GDL with 3D pore network model10.1149/1.3210708 ↗
16. Incorporating embedded microporous layers into topologically equivalent pore network models for oxygen diffusivity calculations in polymer electrolyte membrane fuel cell gas diffusion layers10.1016/j.electacta.2016.08.126 ↗
17. Pore network modelling of capillary transport and relative diffusivity in gas diffusion layers with patterned wettability10.1149/1945-7111/ab9d61 ↗
18. Transport parameter correlations for digitally created PEFC gas diffusion layers by using OpenPNM10.3390/pr9071141 ↗
19. Characterization of PEMFC gas diffusion layer porosity10.1149/2.0921506jes ↗
20. Determination of PEFC gas diffusion layer and catalyst layer porosity utilizing archimedes principle10.1149/2.0251915jes ↗
21. OpenPNM: A pore network modeling package10.1109/MCSE.2016.49 ↗
22. openpnm - Pore Network Modeling Framework in Python, URL https://openpnm.org/.
23. Geankoplis · 2014
24. Bird · 2007
25. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
26. Validated leverett approach for multiphase flow in PEFC diffusion media: I. Hydrophobicity effect10.1149/1.2784283 ↗
27. 2008
28. Improved modeling and understanding of diffusion-media wettability on polymer-electrolyte-fuel-cell performance10.1016/j.jpowsour.2010.03.011 ↗