journal article·2017-09

One new route to optimize the oxidation resistance of TiC/hastelloy (Ni-based alloy) composites applied for intermediate temperature solid oxide fuel cell interconnect by increasing graphite particle size

Qian Qi, Yan Liu, Lujie Wang, Hui Zhang, Jian Huang, Zhengren Huang

Publisher page

Abstract

Abstract TiC/hastelloy composites with suitable thermal expansion and excellent electrical conductivity are promising candidates for IT-SOFC interconnect. In this paper, the TiC/hastelloy composites are fabricated by in-situ reactive infiltration, and the oxidation resistance of composites is optimized by increasing graphite particle size. Results show that the increase of graphite particles size from 1 μm to 40 μm reduces TiC particle size from 2.68 μm to 2.22 μm by affecting the formation process of TiC. Moreover, the decrease of TiC particles size accelerates the fast formation of dense and continuous TiO 2 /Cr 2 O 3 oxide layer, which bring down the mass gain (800 °C/100 h) from 2.03 mg cm −2 to 1.18 mg cm −2 . Meanwhile, the coefficient of thermal expansion decreases from 11.15 × 10 −6 °C -1 to 10.80 × 10 −6 °C -1 , and electrical conductivity maintains about 5800 S cm −1 at 800 °C. Therefore, the decrease of graphite particle size is one simple and effective route to optimize the oxidation resistance of composites, and meantime keeps suitable thermal expansion and good electrical conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Advanced materials and composites · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
2. A review on cell/stack designs for high performance solid oxide fuel cells
3. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
4. Recent advances in metallic interconnects for solid oxide fuel cells
5. High performance ceramic interconnect material for solid oxide fuel cells (SOFCs): Ca- and transition metal-doped yttrium chromite10.1016/j.jpowsour.2011.06.089 ↗
6. Lanthanum chromite-based materials for solid oxide fuel cell interconnects
7. Recent development of SOFC metallic interconnect
8. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
9. Investigation of electrical conductivity and oxidation behavior of TiC and TiN based cermets for SOFC interconnect application
10. The TiC/Ni-Cr composites with low thermal expansion and electrical resistivity applied for it-SOFC interconnects10.1002/adem.201600190 ↗
11. Promising metal matrix composites (TiC/Ni–Cr) for intermediate-temperature solid oxide fuel cell (SOFC) interconnect applications10.1016/j.scriptamat.2015.07.017 ↗
12. R. Koc, G. Swift, H. Xie, Southern Illinois University at Carbondale (US), 2005.
13. Grain size effect on cyclic oxidation of (TiB2+TiC)/Ni3Al composites
14. Improved processing and oxidation-resistance of ZrB2 ultra-high temperature ceramics containing SiC nanodispersoids10.1016/j.msea.2007.03.002 ↗
15. Size effect of Al particles on the oxidation of electrodeposited Ni–Al composite coatings10.1007/s11085-005-6557-5 ↗
16. Influence of powder particle size on the oxidation behavior of a PM Ni3Al alloy
17. Effect of powder particle size on laser induced self-propagating high temperature synthesis reaction in Al-Ti-C system
18. Evaluation of microstructure and contiguity of W/Cu composites prepared by coated tungsten powders
19. The formation mechanism of TiC particles in TiC/Ni composites fabricated by in situ reactive infiltration10.1007/s10853-016-9994-4 ↗
20. Combustion synthesis in the Ti-C-Ni-Mo system: Part I
21. Combustion synthesis in the Ti-C-Ni-Mo system: Part II
22. Effect of mechanical milling of elemental powders on interface formation in TiN-Ni cermets prepared by pulsed current sintering
23. Development of a new cost effective Fe–Cr ferritic stainless steel for SOFC interconnect10.1016/j.ijhydene.2015.05.125 ↗
24. Sintering, mechanical, electrical and oxidation properties of ceramic intermetallic TiC–Ti3Al composites obtained from nano-TiC particles10.1016/j.ceramint.2016.03.102 ↗
25. Oxidation mechanism of Ni-20Cr foils and its relation to the oxide-scale microstructure
26. Effect of particle size on the thermal expansion of XD™ composites
27. Microstructures and properties of Al–50%SiC composites for electronic packaging applications10.1016/S1003-6326(16)64358-3 ↗