Life prediction method of solid oxide fuel cells based on mechanistic damage and electrochemical performance degradation
Source abstract
Abstract
Solid oxide fuel cell (SOFC) is a highly efficient energy conversion device, but its commercialization is limited by the instability of electrochemical and mechanical performance during long-term operation and high-frequency start-up cycles. This study innovatively proposes a life prediction method that combines mechanistic damage and electrochemical performance degradation. The effects of electrode reactions and microstructural degradation on the electrochemical and mechanical properties of SOFC stacks are experimentally analyzed, and a theoretical model of performance degradation is established. Combined with the multi-physics field coupling model, the evolution of stress, strain, voltage, and electrode reactions of SOFC stacks during high-temperature operation is analyzed to achieve accurate prediction of SOFC stack life. The results show that through the SOFC three-cell stack experiment, it is found that its voltage degradation is mainly caused by the increase of ohmic impedance, accounting for 60.68 % of the total degradation. This study predicts that the life of SOFC stack is 7200 h with an accuracy of 91.36 %. The accuracy of life prediction for Jülich long-term performance data exceeds 93.09 %. The analysis of mechanistic damage and electrochemical degradation mechanism provides theoretical support for SOFC life prediction and optimization design, which has important guiding significance for improving SOFC service life.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Efficiency and longevity trade-off analysis and real-time dynamic health state estimation of solid oxide fuel cell system10.1016/j.apenergy.2024.123722 ↗
2. Life testing of 10cm×10cm fuel-electrode-supported solid oxide cells in reversible operation10.1016/j.apenergy.2023.122275 ↗
3. Long-term operation of solid oxide fuel cells and preliminary findings on accelerated testing10.1016/j.ijhydene.2020.01.074 ↗
4. A review on solid oxide fuel cell durability: latest progress, mechanisms, and study tools
5. Towards comprehensive description of stack durability/reliability behavior10.1002/fuce.201400182 ↗
6. Degradation evaluation by distribution of relaxation times analysis for microtubular solid oxide fuel cells10.1016/j.electacta.2020.135913 ↗
7. Recent achievements of NEDO durability project with an emphasis on correlation between cathode overpotential and ohmic loss10.1002/fuce.201600186 ↗
8. A review of reformed methanol-high temperature proton exchange membrane fuel cell systems10.1016/j.rser.2023.113395 ↗
9. A comprehensive review on durability improvement of solid oxide fuel cells for commercial stationary power generation systems10.1016/j.apenergy.2023.121864 ↗
10. An analysis of contact problems in solid oxide fuel cell stacks arising from differences in thermal expansion coefficients10.1016/j.electacta.2016.12.016 ↗
11. A review of physics-based and data-driven models for real-time control of polymer electrolyte membrane fuel cells10.1016/j.egyai.2021.100114 ↗
12. A systematic review of machine learning methods applied to fuel cells in performance evaluation, durability prediction, and application monitoring10.1016/j.ijhydene.2022.10.261 ↗
13. A distributed real-time model of degradation in a solid oxide fuel cell, part I: model characterization10.1016/j.jpowsour.2016.02.040 ↗
14. A simplified approach to predict performance degradation of a solid oxide fuel cell anode10.1016/j.jpowsour.2018.04.080 ↗
15. Degradation analysis of an SOFC short stack subject to 10,000 h of operation10.1149/1945-7111/abc843 ↗
16. Prediction of fuel cell performance degradation using a combined approach of machine learning and impedance spectroscopy10.1016/j.jechem.2023.08.028 ↗
17. Data-driven prognostics of the SOFC system based on dynamic neural network models10.3390/en14185841 ↗
18. Comprehensive analysis of solid oxide fuel cell performance degradation mechanism, prediction, and optimization studies10.3390/en16020788 ↗
19. Modeling the SOFC by BP neural network algorithm10.1016/j.ijhydene.2021.03.132 ↗
20. A hybrid prognostic model applied to SOFC prognostics10.1016/j.ijhydene.2017.08.114 ↗
21. State of health estimation and remaining useful life prediction of solid oxide fuel cell stack10.1016/j.enconman.2017.06.041 ↗
22. An agile layer-resolved SOFC stack model using physics-informed neural network10.1016/j.ijhydene.2023.06.258 ↗
23. Coupling electrochemical impedance spectroscopy and model-based aging estimation for solid oxide fuel cell stacks lifetime prediction10.1016/j.apenergy.2020.115718 ↗
24. Viscoelastic mechanical performance of dense polyurethane mixtures based on dynamic and static modulus testing and creep testing10.1016/j.conbuildmat.2021.126207 ↗
25. Evaluation of mechanical strength of NiO-YSZ anode in solid oxide fuel cell based on small punch test
26. Aging effects on high-temperature creep properties of a solid oxide fuel cell glass-ceramic sealant10.1016/j.jpowsour.2013.04.088 ↗
27. High‐temperature creep behavior of mixed conducting La0.5Sr0.5Fe1−xCoxO3-δ (0.5≤x≤1) materials10.1111/j.1551-2916.2006.01176.x ↗
28. Performance degradation analysis of solid oxide fuel cells using dynamic electrochemical impedance spectroscopy10.1016/j.jpowsour.2022.231569 ↗
29. Differentiation and decomposition of solid oxide fuel cell electrochemical impedance spectra10.3866/PKU.WHXB201806071 ↗
30. Robust and fast estimation of equivalent circuit model from noisy electrochemical impedance spectra10.1016/j.electacta.2022.140474 ↗
31. Achievements of NEDO durability projects on SOFC stacks in the light of physicochemical mechanisms10.1002/fuce.201800187 ↗
32. Post-test characterization of a solid oxide fuel cell after more than 10 years of stack testing10.1016/j.jpowsour.2020.228770 ↗
33. Ni migration in solid oxide cell electrodes: review and revised hypothesis10.1002/fuce.202100072 ↗
34. A hydrogel-assisted GDC chemical diffusion barrier for durable solid oxide fuel cells10.1039/D1TA00507C ↗
35. How the distribution of relaxation times enhances complex equivalent circuit models for fuel cells10.1016/j.electacta.2020.136764 ↗
36. A novel multi-physics coupled heterogeneous single-cell numerical model for solid oxide fuel cell based on 3D microstructure reconstructions10.1039/D2EE00485B ↗
37. Morphology and performance evolution of anode microstructure in solid oxide fuel cell: a model-based quantitative analysis
38. Degradation of Ni-YSZ electrodes in solid oxide cells: impact of polarization and initial microstructure on the Ni evolution10.1149/2.1261915jes ↗
39. A multiaxial creep-damage model for creep crack growth considering cavity growth and microcrack interaction10.1016/j.engfracmech.2014.03.001 ↗
40. Effect of operating temperature on creep and damage in the bonded compliant seal of planar solid oxide fuel cell10.1016/j.ijhydene.2018.01.048 ↗
41. Simulations of creep crack growth in 316 stainless steel using a novel creep-damage model10.1016/j.engfracmech.2012.12.014 ↗
42. Creep behavior of glass/ceramic sealant and its effect on long‐term performance of solid oxide fuel cells10.1111/j.1744-7402.2009.02455.x ↗
43. Mismatch effect of material creep strength on creep damage and failure probability of planar solid oxide fuel cell10.1016/j.ijhydene.2021.10.185 ↗
44. Mechanical behavior and Weibull statistics based failure analysis of vanadium flow battery stacks10.1016/j.jpowsour.2018.11.060 ↗
45. A fully-homogenized multiphysics model for a reversible solid oxide cell stack10.1016/j.ijhydene.2019.06.077 ↗
46. The influence of interconnect ribs on the performance of planar solid oxide fuel cell and formulae for optimal rib sizes10.1016/j.jpowsour.2012.01.041 ↗
47. Micro modeling of solid oxide fuel cell anode based on stochastic reconstruction10.1016/j.jpowsour.2008.06.029 ↗
48. Exchange current model for (La0.8Sr0.2)0.95MnO3 (LSM) porous cathode for solid oxide fuel cells10.1016/j.jpowsour.2016.02.076 ↗
49. SOFC modeling and parameter identification by means of impedance spectroscopy10.1149/1.3247567 ↗
50. Operating limitation and degradation modeling of micro solid oxide fuel cell-combined heat and power system10.1016/j.apenergy.2019.113444 ↗
51. A real-time degradation model for hardware in the loop simulation of fuel cell gas turbine hybrid systems. ASME Turbo Expo: power Land, Sea
52. Microstructural correlations for specific surface area and triple phase boundary length for composite electrodes of solid oxide cells10.1016/j.jpowsour.2018.11.095 ↗
53. Chromium poisoning in (La, Sr) MnO3 cathode: three-dimensional simulation of a solid oxide fuel cell10.1016/j.jpowsour.2016.06.110 ↗
54. Multiscale modeling of degradation of full solid oxide fuel cell stacks10.1016/j.ijhydene.2021.05.204 ↗
55. Degradations of the electrochemical performance of solid oxide fuel cell induced by material microstructure evolutions10.1016/j.apenergy.2018.09.127 ↗
56. Theoretical model for surface diffusion driven Ni-particle agglomeration in anode of solid oxide fuel cell10.1016/j.jpowsour.2014.01.033 ↗
57. Determining an optimum size level of gas turbine for a hybrid SOFC-Gas turbine system based on a new improved bio-inspired10.52293/1.1.1529 ↗
58. Study on creep damage and life prediction of the planar solid oxide fuel cell by modeling of multiphysics coupled10.1016/j.ijhydene.2023.09.211 ↗
59. Redox stability optimization in anode-supported solid oxide fuel cells10.3390/ma17133257 ↗
60. High temperature creep strength design and optimization of solid oxide fuel cell10.1016/j.ijhydene.2022.04.261 ↗
61. Experimental investigation of temperature distribution in solid oxide fuel cells10.1016/j.ijhydene.2024.07.009 ↗
62. Study of high temperature mechanical properties and damage behavior of Ni-YSZ anode/SrO-MgO-SiO2 glass-ceramic sealant/430 ss interconnect system in solid oxide fuel cells (SOFC)10.1016/j.jpowsour.2024.234699 ↗
63. Fuel cell: applications and future prospects10.1016/B978-0-323-95379-5.00004-3 ↗
64. Optimization strategies for solid oxide fuel cell (SOFC) application: a literature survey10.1016/j.rser.2017.03.052 ↗
65. Thermal-expansion offset for high-performance fuel cell cathodes10.1038/s41586-021-03264-1 ↗
66. Oxidation, electrical and mechanical properties of Crofer® 22 solid oxide fuel cell metallic interconnects manufactured through powder metallurgy10.1016/j.ijhydene.2018.01.078 ↗
67. Fabrication of glass ceramic sealants with ceramic fiber filler for solid oxide fuel cells10.1016/j.ceramint.2021.10.161 ↗
68. Application oriented multiple-objective optimization, analysis and comparison of solid oxide fuel cell systems with different configurations10.1016/j.apenergy.2018.11.038 ↗