Analysis and optimization of dynamic response during the startup process of proton exchange membrane fuel cell
Source abstract
Abstract
Proton Exchange Membrane Fuel Cell (PEMFC) is a prominent application of hydrogen energy in fields such as mobile devices, vehicles and small-scale energy systems. This study experimentally investigates transient response of the automotive PEMFC when starting with different load under various operating conditions, which significantly influences durability. The key finding is that dynamic behavior follows a “two-stage” response mode under drier conditions. The first stage is related to the diffusion processes of cathode gas and the second stage is determined by the membrane rehydration process. Under wetter conditions, dynamic behavior exhibits a “three-stage” response mode with a larger voltage fluctuation and longer startup time. The contributors to the first two stages are the same as the “two-stage” response mode and the third stage is determined by the degree of cathode flooding. Results indicate that increasing cathode stoichiometry, cathode humidity, and temperature obviously enables PEMFC to startup more stable and faster and with a higher load. Besides, a step loading strategy with a gradually reducing magnitude achieves an optimal balance between response time and voltage fluctuation at the target load, with a moderate startup time of 9.6 s and minimal voltage fluctuation of 0.009 V.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Performance, emissions and economic analyses of hydrogen fuel cell vehicles10.1016/j.rser.2024.114543 ↗
2. A class of promising fuel cell performance: international status on the application of nanofluids for thermal management systems
3. Critical and strategic raw materials for electrolysers, fuel cells, metal hydrides and hydrogen separation technologies10.1016/j.ijhydene.2024.05.096 ↗
4. A review: fluid dynamic and mass transport behaviour in a proton exchange membrane fuel cell stack10.1016/j.rser.2024.114292 ↗
5. A review of water management methods in proton exchange membrane fuel cells10.1016/j.enconman.2024.118150 ↗
6. Sensitivity analysis of proton exchange membrane fuel cell performance to operating parameters and its applicability assessment under different conditions10.1016/j.enconman.2020.113727 ↗
7. Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions10.1016/j.pecs.2020.100859 ↗
8. A quick evaluating method for automotive fuel cell lifetime10.1016/j.ijhydene.2008.04.048 ↗
9. A reverse-current decay mechanism for fuel cells10.1149/1.1896466 ↗
10. A review of automotive proton exchange membrane fuel cell degradation under start-stop operating condition10.1016/j.apenergy.2018.04.049 ↗
11. Review on system mitigation strategies for start-stop degradation of automotive proton exchange membrane fuel cell10.1016/j.apenergy.2022.120058 ↗
12. Start-stop phenomena in channel and land areas of a polymer electrolyte fuel cell10.1149/1.3518520 ↗
13. Study on the processes of start-up and shutdown in proton exchange membrane fuel cells10.1016/j.jpowsour.2008.12.075 ↗
14. Mitigated start-up of PEMFC in real automotive conditions: local experimental investigation and development of a new accelerated stress test protocol10.1149/1945-7111/abf77b ↗
15. Paik · 2012
16. Start up system and method for a fuel cell power plant using a cathode electrode fuel purge
17. Paul Taichiang · 2006
18. Effects of a hydrogen and air supply procedure on the performance degradation of PEMFCs10.1016/j.ijhydene.2010.04.072 ↗
19. Carbon corrosion of a PEMFC during shut-down/start-up when using an air purge procedure10.1149/MA2008-02/11/985 ↗
20. Mitigating PEMFC degradation during start-up: locally resolved experimental analysis and transient physical modelling10.1149/1945-7111/abf4eb ↗
21. Transient analysis of polymer electrolyte fuel cells10.1016/j.electacta.2004.08.022 ↗
22. Transient behavior of a proton exchange membrane fuel cell under dry operation10.1149/1.2162450 ↗
23. Research on improving dynamic response ability of 30kW real fuel cell system based on operating parameter optimization10.1016/j.ijhydene.2022.09.298 ↗
24. Modeling and temperature control of a water-cooled PEMFC system using intelligent algorithms10.1016/j.apenergy.2024.123790 ↗
25. Dynamic characteristics of proton exchange membrane fuel cell on a multiple time scale
26. The effect of stoichiometry on dynamic behavior of a proton exchange membrane fuel cell (PEMFC) during load change10.1016/j.jpowsour.2004.03.060 ↗
27. Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes10.1016/j.jpowsour.2006.03.077 ↗
28. The effects of air stoichiometry and air excess ratio on the transient response of a PEMFC under load change conditions10.1016/j.apenergy.2014.10.046 ↗
29. Load changing characteristics of the hydrogen-air and hydrogen-oxygen proton exchange membrane fuel cells10.1002/er.7306 ↗
30. Hydrogen starvation mitigation strategies during the start-up of proton exchange membrane fuel cell stack10.1016/j.jpowsour.2021.230809 ↗
31. Optimization of hydrogen feeding procedure in PEM fuel cell systems for transportation10.1016/j.ijhydene.2014.08.070 ↗
32. Hydrogen purge and reactant feeding strategies in self-humidified PEM fuel cell systems10.1016/j.ijhydene.2016.06.196 ↗
33. Transient response of a unit proton-exchange membrane fuel cell under various operating conditions10.1016/j.jpowsour.2008.06.073 ↗
34. Experimental study on dynamic response characteristics and performance degradation mechanism of hydrogen-oxygen PEMFC during loading10.1016/j.ijhydene.2022.11.036 ↗
35. Dynamic behavior study on voltage and temperature of proton exchange membrane fuel cells10.1016/j.applthermaleng.2018.09.030 ↗
36. Experimental study on improving the dynamic characteristics of open-cathode PEMFC stack with dead-end anode by condensation and circulation of hydrogen10.1016/j.ijhydene.2020.05.108 ↗
37. Experimental study on dynamic voltage uniformity of a 2-kW air-cooled PEMFC10.1007/s00202-018-0733-5 ↗
38. Experimental study on the voltage uniformity for dynamic loading of a PEM fuel cell stack10.1016/j.ijhydene.2015.04.058 ↗
39. Experimental investigation on the voltage uniformity for a PEMFC stack with different dynamic loading strategies10.1016/j.ijhydene.2020.05.070 ↗
40. Theory and design for mechanical measurements, 6th edition
41. Pukrushpan · 2006
42. Rapid activation of proton exchange membrane fuel cell stack and underlying mechanisms involved10.1016/j.enconman.2024.118179 ↗
43. Two-dimensional simulation of cold start processes for proton exchange membrane fuel cell with different hydrogen flow arrangements10.1016/j.ijhydene.2020.04.187 ↗
44. An innovative approach to predict the diffusion rate of reactant's effects on the performance of the polymer electrolyte membrane fuel cell10.3390/math11194094 ↗
45. Optimization of polymer electrolyte membrane fuel cell performance by geometrical changes
46. Proton exchange membrane fuel cell (PEMFC) operation in high current density (HCD): problem, progress and perspective10.1016/j.enconman.2024.118348 ↗