Functionalised carbon fiber based flexible symmetric supercapacitors with wider potential window for sustainable energy storage applications
Source abstract
Abstract
Reuse of carbon fiber waste to develop a free-formed sustainable wire-type supercapacitor is demonstrated by a one-step aerobic pyrolysis process. Single carbon fiber tows recovered from offcuts are treated at varying temperatures (200 °C, 300 °C, and 400 °C), resulting in CF200, CF300, and CF400, respectively. The heat treatment enhances energy storage properties by introducing oxygen functional groups, improving surface wettability, and increasing active sites. X-ray diffraction (XRD) analysis shows the structural properties with a reduction in crystallite size at higher temperatures, while scanning electron microscopy (SEM) reveals a transition from smooth to rough fiber surfaces and defect formation. Raman spectroscopy confirms the turbostratic carbon phase. Transmission electron microscopy (TEM) confirms the structural changes at the nanoscale, and X-ray photoelectron spectroscopy (XPS) provides insights into the surface chemical composition. The work reports length capacitance (F cm⁻ 1) for the symmetric wire-shape supercapacitor (WSE) device, achieving an energy density of 12.02 mWh cm⁻ 1 and a power density of 244 W cm⁻ 1 at 2 mA cm⁻ 1. The device shows remarkable capacitance retention of 119 % over 10,000 cycles and 100 % coulombic efficiency. A Light Emitting Diode (LED) powered by the flexible device demonstrates its applicability as an energy storage solution under various bending and twisting conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Fabrication and properties of carbon fibers10.3390/ma2042369 ↗
2. Review carbon fibers for composites10.1023/A:1004780301489 ↗
3. A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades10.1016/j.compositesb.2021.108768 ↗
4. CFRP-recycling following a pyrolysis route: process optimization and potentials10.1177/0021998308097737 ↗
5. Processing, structure, and properties of carbon fibers10.1016/j.compositesa.2016.10.018 ↗
6. Economic and environmental assessment of recovery and disposal pathways for CFRP waste management10.1016/j.resconrec.2018.01.024 ↗
7. The effect of processing on the structure and properties of carbon fibers10.1016/S0008-6223(97)00185-1 ↗
8. Recycling of carbon fiber with epoxy composites by chemical recycling for future perspective: a review10.1007/s11696-020-01198-y ↗
9. Capillarity enabled large-array liquid metal electrodes for compact and high-throughput dielectrophoretic microfluidics
10. Multifunctionality of MWCNT modified carbon fiber reinforced thermoplastic composite, and reclaiming composite in the pursuit of sustainable energy storage applications: an experimental and numerical analysis10.1016/j.compscitech.2024.110468 ↗
11. Hierarchical carbonaceous modified carbon fiber reinforced polyether ether ketone and reusing reclaimed carbon fiber for sustainable photocatalysis: an experimental and numerical analysis
12. Silane functionalized cardanol/calcium carbonate epoxy‐reinforced polymer nanocomposites for sustainable microwave absorption applications10.1002/pc.28744 ↗
13. Pyrolysis model for a carbon fiber/epoxy structural aerospace composite10.1177/0734904116679422 ↗
14. Oxidation and pyrolysis of chitosan as a route for carbon fiber derivation10.1016/S0144-8617(02)00018-8 ↗
15. Electrochemical hydrogen storage materials: state-of-the-art and future perspectives10.1021/acs.energyfuels.3c05138 ↗
16. A comprehensive study of renewable energy sources: classifications, challenges and suggestions10.1016/j.esr.2022.100939 ↗
17. Construction of a composite Sn‐DLC artificial protective layer with hierarchical interfacial coupling based on gradient coating technology toward robust anodes for Zn metal batteries10.1002/aenm.202402015 ↗
18. A novel aluminum–graphite dual-ion battery10.1002/aenm.201670064 ↗
19. Realizing dendrite-free lithium deposition with three-dimensional soft-rigid nanofiber interlayers10.1016/j.jcis.2024.04.029 ↗
20. Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage10.1038/s41557-018-0045-4 ↗
21. Fabrication of coin cell supercapattery device using morphology-controlled nickel cobaltite nanostructures as active material10.1016/j.est.2023.109227 ↗
22. Coil‐type asymmetric supercapacitor electrical cables10.1002/smll.201501802 ↗
23. Where do batteries end and supercapacitors begin?10.1126/science.1249625 ↗
24. Halper · 2006 · 1
25. Capacitive charge storage mechanism in sanmartinite to be determined by qualitative and quantitative electrochemical analysis10.1016/j.electacta.2022.141692 ↗
26. Carbon nanotubes for supercapacitor10.1007/s11671-009-9508-2 ↗
27. Studies and characterisations of various activated carbons used for carbon/carbon supercapacitors10.1016/S0378-7753(01)00707-8 ↗
28. Activated carbon clothes for wide-voltage high-energy-density aqueous symmetric supercapacitors10.1016/j.cclet.2019.09.045 ↗
29. Graphene for supercapacitor applications10.1039/c3ta12193c ↗
30. High‐performance supercapacitors based on hierarchically porous graphite particles10.1002/aenm.201100114 ↗
31. High-capacitance hybrid supercapacitor based on multi-colored fluorescent carbon-dots10.1038/s41598-017-11347-1 ↗
32. Biobased nano porous active carbon fibers for high-performance supercapacitors10.1021/acsami.6b02214 ↗
33. Simple air calcination affords commercial carbon cloth with high areal specific capacitance for symmetrical supercapacitors10.1039/C8TA07561A ↗
34. An in-depth study of the electrical characterization of supercapacitors for recent trends in energy storage system10.1016/j.est.2022.106198 ↗
35. Activation of carbon fiber for enhancing electrochemical performance10.1039/C9QI01028A ↗
36. Effect of surfactants on capacitance properties of carbon electrodes10.1557/opl.2011.1477 ↗
37. Towards flexible solid-state supercapacitors for smart and wearable electronics10.1039/C7CS00505A ↗
38. Reclaimed carbon fiber-based 2.4 v aqueous symmetric supercapacitors10.1021/acssuschemeng.8b05951 ↗
39. Solvent effect on the pore-size dependence of an organic electrolyte supercapacitor10.1021/jz3004624 ↗
40. Wire-shaped 3D-hybrid supercapacitors as Substitutes for batteries10.1007/s40820-019-0356-z ↗
41. Analysis of activation process of carbon black based on structural parameters obtained by XRD analysis10.3390/cryst11020153 ↗
42. X-ray diffraction and the Bragg equation10.1021/ed074p129 ↗
43. How to calculate crystallite size from x-ray diffraction (XRD) using Scherrer method10.17509/ajse.v2i1.37647 ↗
44. The effect of sizing and surface oxidation on the surface properties and tensile behaviour of recycled carbon fibre: an end-of-life perspective
45. Effects of maleic anhydride content on mechanical properties of carbon fibers-reinforced maleic anhydride-grafted-poly-propylene matrix composites10.5714/CL.2016.20.039 ↗
46. High-performance supercapacitor of functionalized carbon fiber paper with high surface ionic and bulk electronic conductivity: effect of organic functional groups10.1016/j.electacta.2015.07.044 ↗
47. Investigating nanostructures in carbon fibres using Raman spectroscopy10.1016/j.carbon.2017.12.108 ↗
48. Characterization of PAN-based carbon fibres with laser Raman spectroscopy: Part I Effect of processing variables on Raman band profiles10.1007/BF00352882 ↗
49. Raman microprobe studies on carbon materials10.1016/0008-6223(94)90148-1 ↗
50. Enhancing rate capability of amorphous nickel phosphate supercapattery electrode via composition with crystalline silver phosphate10.1016/j.electacta.2018.03.136 ↗
51. Knitting controllable oxygen-functionalized carbon fiber for ultrahigh capacitance wire-shaped supercapacitors10.1021/acsami.0c14221 ↗
52. Properties and structure of in situ transformed PAN-based carbon fibers10.3390/ma11061017 ↗
53. Systematic investigation on the charge storage behavior of GdCrO3 in aqueous electrolyte10.1016/j.est.2021.103145 ↗
54. Activated carbon fibers with different hydrophilicity/hydrophobicity modified by pDA-SiO2 coating for gravity oil–water separation10.1016/j.seppur.2022.122179 ↗
55. Oxygen/fluorine-functionalized flexible carbon electrodes for high-performance and anti-self-discharge Zn-ion hybrid capacitors10.1016/j.jpowsour.2022.231586 ↗
56. Surface analysis of unsized and sized carbon fibers10.1016/S0008-6223(98)00300-5 ↗
57. Graphene nanopetal wire supercapacitors with high energy density and thermal durability10.1016/j.nanoen.2017.05.050 ↗
58. Electrochemical stability of organic electrolytes in supercapacitors: spectroscopy and gas analysis of decomposition products10.1016/j.jpowsour.2007.08.070 ↗
59. Coaxial fiber supercapacitor using all-carbon material electrodes10.1021/nn4016345 ↗
60. Stretchable wire-shaped asymmetric supercapacitors based on pristine and MnO2 coated carbon nanotube fibers10.1021/acsnano.5b01244 ↗
61. Enhanced electrochemical performances of graphene based solid-state flexible cable type supercapacitor using redox mediated polymer gel electrolyte10.1016/j.carbon.2016.05.008 ↗
62. Flexible and weaveable capacitor wire based on a carbon nanocomposite fiber10.1002/adma.201302498 ↗
63. MnO2-modified hierarchical graphene fiber electrochemical supercapacitor10.1016/j.jpowsour.2013.08.045 ↗