journal article·2024-12

Role of oxide layer on corrosion resistance and surface conductivity of titanium bipolar plates for proton exchange membrane fuel cell

Bo Chen, Biao Ge, Xianglu Zhang, Daijun Yang, Peiyong Yang, Wei Lu, Junying Min, Pingwen Ming, Cunman Zhang

Publisher page

Abstract

Heat-assisted forming (either hot stamping or multi-step forming with intermediate annealing) has been demonstrated as an effective novel forming process of titanium bipolar plate (Ti-BPP) with fine flow channels and high geometrical accuracy, where an oxide layer can be introduced to Ti-BPPs due to thermal oxidation. Although low-cost coating (e.g., amorphous carbon coating) is normally applied to Ti-BPPs in order to increase their corrosion resistance and surface conductivity, the impact and mechanism of oxide layer on the corrosion resistance and surface conductivity of coated Ti-BPPs remain unclear. This work finds that the oxide layer introduced by thermal oxidation enhances the corrosion resistance of coated Ti-BPPs (cathodic corrosion current density decreased from 1.54 to 0.54 μA/cm 2) without reducing surface conductivity. The oxide layer thickens from <10 to 100–150 nm, with its primary composition changing from TiO 2 to Ti 3O during thermal oxidation and coating process. The presence of Ti 3O enhances the resistance of the charge transfer and point defect migration of Ti-BPPs while moderating the capacitive behavior of amorphous carbon coating. Maintaining surface conductivity relies on two key mechanisms: the reduction of concentrated and film resistance by amorphous carbon coating, and the transformation of oxide layer`s composition.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Corrosion of structural components of proton exchange membrane water electrolyzer anodes: a review10.1016/j.jpowsour.2022.232469 ↗
2. Effect of fluoride ion concentration and fluctuating conditions on titanium bipolar plate in PEM water electrolyser environment10.1016/j.corsci.2023.111414 ↗
3. Stainless steel bipolar plates for proton exchange membrane fuel cells: materials, flow channel design and forming processes10.1016/j.jpowsour.2020.227783 ↗
4. Bipolar plates for PEM fuel cells10.1016/S0378-7753(03)00070-3 ↗
5. A reactive-sputter-deposited TiSiN nanocomposite coating for the protection of metallic bipolar plates in proton exchange membrane fuel cells10.1016/j.ceramint.2019.09.263 ↗
6. Electrochemical behavior and surface conductivity of NbC modified Ti bipolar plate for proton exchange membrane fuel cell10.1016/j.surfcoat.2020.126064 ↗
7. Optimizing the interfacial potential distribution to mitigate high transient potential induced dissolution on C/Ti coated metal bipolar plates used in PEMFCs10.1016/j.corsci.2022.110686 ↗
8. Effect of the addition of milled carbon fiber as a secondary filler on the electrical conductivity of graphite/epoxy composites for electrical conductive material10.1016/j.compositesb.2015.08.034 ↗
9. Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells10.1016/j.ijhydene.2014.08.113 ↗
10. Coating developments towards enabling aluminum as a bipolar plate material for PEM fuel cells10.1016/j.jpowsour.2023.233513 ↗
11. High corrosion resistance and surface conductivity of (Ti1-xCrx) N coating for titanium bipolar plate10.1016/j.corsci.2022.110256 ↗
12. Investigation of formability of metallic bipolar plates via stamping for light-weight PEM fuel cells10.1016/j.ijhydene.2020.01.251 ↗
13. The newly developed components for the fuel cell vehicle, Mirai
14. Vertical‐graphene‐reinforced titanium alloy bipolar plates in fuel cells10.1002/adma.202110565 ↗
15. Investigation and optimization of the ultra-thin metallic bipolar plate multi-stage forming for proton exchange membrane fuel cell10.1016/j.jpowsour.2020.229298 ↗
16. Investigation on forming of titanium bipolar plates using micro-stamping process
17. Fabrication of micro channels for titanium PEMFC bipolar plates by multistage forming process10.1016/j.ijhydene.2020.07.230 ↗
18. Ultrasonic vibration-assisted stamping of serpentine micro-channel for titanium bipolar plates used in proton-exchange membrane fuel cell10.3390/ma16093461 ↗
19. Fabrication of titanium bipolar plates by rubber forming and performance of single cell using TiN-coated titanium bipolar plates10.1016/j.ijhydene.2014.03.013 ↗
20. Fabrication of titanium bipolar plates for proton exchange membrane fuel cells by uniform pressure electromagnetic forming10.1016/j.ijhydene.2021.09.086 ↗
21. Development of titanium bipolar plates fabricated by additive manufacturing for PEM fuel cells in electric vehicles10.1016/j.ijhydene.2022.08.282 ↗
22. Improving formability of titanium bipolar plate via hot stamping
23. Manufacturing of titanium bipolar plates using warm stamping process10.1007/s13369-020-04870-3 ↗
24. A novel multistage forming process with intermediate annealing for PEMFC titanium bipolar plates with fine flow channels10.1016/j.ijhydene.2023.10.285 ↗
25. Reviewing metallic PEMFC bipolar plates10.1002/fuce.200900187 ↗
26. Nb–Cr–C coated titanium as bipolar plates for proton exchange membrane fuel cells10.1016/j.jpowsour.2021.230797 ↗
27. Protective graphite coating on metallic bipolar plates for PEMFC applications10.1016/j.electacta.2011.11.026 ↗
28. Conducting polymer-coated stainless steel bipolar plates for proton exchange membrane fuel cells (PEMFC)10.1016/j.ijhydene.2005.04.011 ↗
29. Mechanisms of growth, properties and degradation of amorphous carbon films by closed field unbalanced magnetron sputtering on stainless steel bipolar plates for PEMFCs10.1016/j.apsusc.2017.06.122 ↗
30. Corrosive behavior and interfacial conductivity of stampable aC film on titanium bipolar plate in proton exchange membrane fuel cells10.1016/j.diamond.2023.109796 ↗
31. Corrosion behavior of passivated 316LSS with Ag coating as PEMFC bipolar plate10.1155/2011/103785 ↗
32. Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells10.1016/j.jpowsour.2006.06.084 ↗
33. 2018
34. Effects of pH value and temperature on the corrosion behavior of a Ta2N nanoceramic coating in simulated polymer electrolyte membrane fuel cell environment10.1016/j.ceramint.2016.07.175 ↗
35. Electrochemical behavior and surface conductivity of C/TiC nanocomposite coating on titanium for PEMFC bipolar plate10.3390/met12050771 ↗
36. ZrC coating modified Ti bipolar plate for proton exchange membrane fuel cell10.1002/fuce.201900241 ↗
37. Balancing the corrosion resistance and through-plane electrical conductivity of Cr coating via oxygen plasma treatment10.1016/j.jmst.2020.06.012 ↗
38. Long-term polarization accelerated degradation of nano-thin C/Ti coated SS316L bipolar plates used in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2021.12.229 ↗
39. Enhancing through-plane electrical conductivity by introducing Au microdots onto TiN coated metal bipolar plates of PEMFCs10.1016/j.ijhydene.2020.07.270 ↗
40. Potential polarization accelerated degradation of interfacial electrical conductivity for Au/TiN coated 316L SS bipolar plates used in polymer electrolyte membrane fuel cells10.1016/j.corsci.2021.109624 ↗
41. Corrosion resistance and conductivity of amorphous carbon coated SS316L and TA2 bipolar plates in proton-exchange membrane fuel cells10.1016/j.diamond.2021.108503 ↗
42. High-performance amorphous carbon films on titanium foils: toward industrial preparation of coated metallic bipolar plates for proton exchange membrane fuel cells10.1016/j.ijhydene.2023.05.197 ↗
43. Bipolar plate development with additive manufacturing and protective coating for durable and high-efficiency hydrogen production10.1016/j.jpowsour.2018.06.078 ↗
44. The influence of thermal oxidation parameters on the growth of oxide layers on titanium10.1016/j.vacuum.2017.07.023 ↗
45. Influence of growth defects on the corrosion resistance of sputter-deposited TiAlN hard coatings10.3390/coatings9080511 ↗
46. The relationship between surface roughness and corrosion
47. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
48. A study on the oxidation and carbon diffusion of TiC in alumina–titanium carbide ceramics using XPS and Raman spectroscopy10.1016/S0254-0584(98)00187-4 ↗
49. Corrosion and conductivity behavior of titanium-doped amorphous carbon film coated SS316L in the environment of PEMFCs10.1016/j.matchemphys.2021.125234 ↗
50. Validation of corrosion rates measured by the Tafel extrapolation method10.1016/j.corsci.2005.05.046 ↗
51. Stainless steels in bipolar plates—surface resistive properties of corrosion resistant steel grades during current loads10.1016/j.corsci.2005.05.012 ↗
52. EIS evaluation of steady-state characteristic of 316L stainless steel passive film grown in acidic solution10.1016/j.elecom.2012.09.040 ↗
53. Towards mass applications: a review on the challenges and developments in metallic bipolar plates for PEMFC10.1016/j.pnsc.2020.10.015 ↗
54. Electrical contact resistance: properties of stationary interfaces, in Electrical Contacts-1998
55. Electrical contact resistance: fundamental principles