journal article·2024-12

Enhancing tin foil anodes in lithium-ion batteries through carbon nanotube integration via rolling technique

Phi N. Nguyen, W.J. Kim

Publisher page

Abstract

In this study, we propose the use of multi-walled carbon nanotubes (MWCNTs) combinded with accumulative roll bonding technique to enhance the performance of Sn foils as anodes in lithium-ion batteries. Increasing the amount of CNTs reduces the grain size of Sn, which leads to an increase in hardness. As the CNT content increases from 0 to 2.2 wt%, several electrochemical improvements are observed: decreased nucleation overpotential, enhanced Coulombic efficiency, reduced overpotential, lowered charge transfer resistance, and increased lithium-ion diffusivity. These combined effects synergistically enhance the capacity of the anode. The benefits of incorporating CNTs into Sn can be attributed to two main factors: (1) the increased grain boundaries, dislocations, and CNTs provide more active sites for (de)lithiation and facilitate faster lithium-ion diffusion paths; (2) the improved strength resulting from grain refinement and CNT reinforcements helps maintain structural integrity during the formation and growth of high-density pores over multiple cycles. Although the addition of CNTs enhances capacity up to a content of 0.9 wt%, further additions result in a stagnation in capacity enhancement. Furthermore, when the CNT content exceeds 0.6 wt%, cyclic life, capacity retention, and rate capabilities significantly decline due to increased CNT agglomeration.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. True performance metrics in electrochemical energy storage10.1126/science.1213003 ↗
2. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
3. Dipole–dipole interaction induced electrolyte interfacial model to stabilize antimony anode for high-safety lithium-ion batteries10.1021/acsenergylett.2c01408 ↗
4. Interfacial and interphasial chemistry of electrolyte components to invoke high-performance antimony anodes and non-flammable lithium-ion batteries
5. Electrolyte boosting microdumbbell-structured alloy/metal oxide anode for fast-charging sodium-ion batteries10.1021/acsmaterialslett.2c00841 ↗
6. Electrolyte-mediated stabilization of high-capacity micro-sized antimony anodes for potassium-ion batteries
7. Tin-graphene tubes as anodes for lithium-ion batteries with high volumetric and gravimetric energy densities10.1038/s41467-020-14859-z ↗
8. A carbon nanotube-reinforced noble tin anode structure for lithium-ion batteries10.1007/s10800-016-0933-5 ↗
9. Group IVA element (Si, Ge, Sn)-Based alloying/dealloying anodes as negative electrodes for full-cell lithium-ion batteries10.1002/smll.201702000 ↗
10. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
11. Using X-ray microscopy to understand how nanoporous materials can Be used to reduce the large volume change in alloy anodes10.1021/acs.nanolett.6b04181 ↗
12. Physical properties of multiwalled carbon nanotubes10.1016/S1463-0176(99)00012-5 ↗
13. Ab initio study of the elastic properties of single-walled carbon nanotubes and graphene10.1016/S0009-2614(00)00764-8 ↗
14. Exceptionally high Young's modulus observed for individual carbon nanotubes10.1038/381678a0 ↗
15. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
16. Carbon nanotubes--the route toward applications10.1126/science.1060928 ↗
17. A comparative study of electrochemical properties of two kinds of carbon nanotubes as anode materials for lithium ion batteries10.1016/j.electacta.2007.09.040 ↗
18. Metallic and semiconducting single-walled carbon nanotubes as the anode material of Li ion secondary battery10.1016/j.matlet.2008.01.088 ↗
19. A non-GIC mechanism of lithium storage in chemical etched MWNTs10.1016/j.jelechem.2003.09.004 ↗
20. Effects of ball-milling on lithium insertion into multi-walled carbon nanotubes synthesized by thermal chemical vapour deposition10.1016/j.jpowsour.2005.08.024 ↗
21. Enhanced saturation lithium composition in ball-milled single-walled carbon nanotubes10.1016/S0009-2614(00)00851-4 ↗
22. Cage-like carbon nanotubes/Si composite as anode material for lithium ion batteries10.1016/j.elecom.2005.08.024 ↗
23. Preparation and characterization of carbon nanotubes for energy storage10.1016/S0378-7753(03)00117-4 ↗
24. Preparation and evaluation of an efficient Si-CNT anode decorated with Sn for lithium-ion batteries10.1007/s11664-023-10213-3 ↗
25. A review of application of carbon nanotubes for lithium ion battery anode material10.1016/j.jpowsour.2012.02.013 ↗
26. Anodes for lithium batteries: tin revisited10.1016/S1388-2481(03)00135-8 ↗
27. Heterogeneous Li-alloy interphase enabling Li compensation during cycling for high energy density batteries10.1016/j.ensm.2022.11.010 ↗
28. Magnesium matrix composites fabricated by using accumulative roll bonding of magnesium sheets coated with carbon-nanotube-containing aluminum powders10.1016/j.scriptamat.2012.03.040 ↗
29. Fabrication of robust aluminum-carbon nanotube composites using ultrasonic assembly and rolling process10.1007/s12613-020-1969-4 ↗
30. Nanostructured composite foils produced via accumulative roll bonding as lithium-ion battery anodes10.1021/acsami.1c23529 ↗
31. Enhancing the electrochemical performance of Sn-Zn alloy anode foil for lithium-ion batteries through microstructure design via accumulative roll bonding technique10.1016/j.jpowsour.2023.233988 ↗
32. Sn/carbon nanotube composite anode with improved cycle performance for lithium-ion battery10.1007/s11581-013-0870-9 ↗
33. Nano-confined tin oxide in carbon nanotube electrodes via electrostatic spray deposition for lithium-ion batteries10.3390/ma15249086 ↗
34. Recrystallization mechanisms during high-temperature XRD and oxidation behavior of CNT-reinforced NiAl composites10.1016/j.corsci.2022.110384 ↗
35. Raman spectroscopy of hydrogenated amorphous carbons10.1103/PhysRevB.72.085401 ↗
36. Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes10.1016/j.scriptamat.2013.01.013 ↗
37. Graphene networks anchored with Sn@graphene as lithium ion battery anode10.1021/nn406105n ↗
38. Stress evolution during cycling of alloy-anode solid-state batteries10.1016/j.joule.2021.07.002 ↗
39. High-performance Sn@carbon nanocomposite anode for lithium batteries10.1016/j.jpowsour.2012.11.004 ↗
40. Green self-derived templating preparation of nitrogen, sulfur co-doped porous carbon/tin composites with synergistic effect towards high-performance lithium-ion batteries10.1016/j.apsusc.2021.152319 ↗
41. Rattle-type porous Sn/C composite fibers with uniformly distributed nanovoids containing metallic Sn nanoparticles for high-performance anode materials in lithium-ion batteries10.1039/C8NR06075D ↗
42. Nano-Sn embedded in expanded graphite as anode for lithium ion batteries with improved low temperature electrochemical performance10.1016/j.electacta.2015.11.015 ↗
43. Zn-Sn interdigitated eutectic alloy anodes with high volumetric capacity for lithium-ion batteries10.1016/j.joule.2019.01.005 ↗
44. Electrochemical lithiation and de-lithiation of MWNT-Sn/SnNi nanocomposites10.1016/j.carbon.2005.01.008 ↗
45. Carbon nanotubes for lithium ion batteries10.1039/b904116h ↗
46. An in-depth analysis of the transformation of tin foil anodes during electrochemical cycling in lithium-ion batteries10.1149/1945-7111/ac42f0 ↗
47. Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite-free lithium metal anodes10.1002/anie.201702099 ↗
48. Cycle performance improvement of LiFePO4 cathode with polyacrylic acid as binder10.1016/j.electacta.2012.07.054 ↗
49. Electrochemical impedance Spectroscopy─A tutorial10.1021/acsmeasuresciau.2c00070 ↗
50. A novel synthesis strategy to improve cycle stability of LiNi0.8Mn0.1Co0.1O2 at high cut-off voltages through core-shell structuring10.1007/s12274-019-2469-6 ↗
51. Circumventing huge volume strain in alloy anodes of lithium batteries10.1038/s41467-020-15452-0 ↗
52. Grain size and hardness: key parameters for enhancing the chemo-mechanical stability of lithiated aluminum foil anodes10.1016/j.jallcom.2023.171279 ↗
53. XPS on Li-Battery-Related compounds: analysis of inorganic SEI phases and a methodology for charge correction10.1021/acsaem.8b00406 ↗
54. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries10.1016/j.electacta.2010.05.072 ↗
55. Insight into the formation/decomposition of solid electrolyte interphase films and effects on the electrochemical properties of Sn/graphene anodes10.1021/acs.jpcc.8b08715 ↗
56. XPS and ToF-SIMS study of electrode processes on Sn-Ni alloy anodes for Li-ion batteries10.1021/jp201232n ↗
57. A new look at the solid electrolyte interphase on graphite anodes in Li-ion batteries10.1016/j.jpowsour.2005.05.062 ↗
58. Improvement of hard carbon electrode performance by manipulating SEI formation at high charging rates10.1021/acsami.9b07449 ↗
59. Electrochemical activation, voltage decay and hysteresis of Li-rich layered cathode probed by various cobalt content10.1016/j.electacta.2018.01.181 ↗
60. In situ focused ion beam scanning electron microscope study of microstructural evolution of single tin particle anode for Li-ion batteries10.1021/acsami.8b13981 ↗