Separator porous skeleton regulation dependency on lithium-ion and lithium-metal battery performances
Source abstract
Abstract
Building separator porous skeletons that suit lithium-ion and lithium-metal batteries (LIBs and LMBs) remains challenging since battery assembly and operation degrade separator mechanical-chemical stabilities inevitably. To fabricate separators with industrial considerations and battery compatibility, herein, the effect of intrinsic porous skeletons on separator mechanical/chemical stabilities and subsequent LIB or LMB performances are clarified based on uncovering integrated porous skeleton formation mechanisms. Lamellae separation and slip dominate longitudinal drawing, severally generating inter-fibril defects and inner-fibril lamellae. Transverse drawing sequentially compels inter-fibril defects to split, which deflects inner-fibril lamellae and enlarges pores. Homogenized lamellae dispersions thus exhibit unique advantages, maximizing fibrous refinement and uniformizing porous skeletons. This superior porous skeleton with smoother linearity facilitates homogeneous Li + fluxes, stabilizes Li plating-stripping, and enables improved battery performances, especially at high currents, indicating more suitable with high-power density batteries and fast charging technologies. The dependency clarifications of separator fabrication-structure-function lend theoretical guidance for fabricating and choosing ideal porous skeletons for not only LIBs and LMBs but also the other prospective rechargeable batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Hydrogen bond networks stabilized high‐capacity organic cathode for lithium‐ion batteries
2. A review of nonaqueous electrolytes, binders, and separators for lithium-ion batteries10.1007/s41918-022-00131-z ↗
3. A thermoresponsive composite separator loaded with paraffin@SiO2 microparticles for safe and stable lithium batteries10.1016/j.jechem.2021.03.046 ↗
4. Microstructure reconstruction of battery polymer separators by fusing 2D and 3D image data for transport property analysis10.1016/j.jpowsour.2020.229101 ↗
5. Surface-Modified membrane as A separator for lithium-ion polymer battery10.3390/en3040866 ↗
6. Thermally stable non-aqueous ceramic-coated separators with enhanced nail penetration performance10.1016/j.jpowsour.2019.04.046 ↗
7. Blending based polyacrylonitrile/poly(vinyl alcohol) membrane for rechargeable lithium ion batteries10.1016/j.memsci.2018.05.013 ↗
8. Lithium‐ion battery separators for ionic‐liquid electrolytes: a review10.1002/adma.201904205 ↗
9. Polymers for battery applications-active materials, membranes, and binders
10. Polystyrene sulfonate threaded through a metal-organic framework membrane for fast and selective lithium-ion separation10.1002/ange.201607329 ↗
11. Improving the Li-S battery performance by applying a combined interface engineering approach on the Li2S cathode10.1039/C9TA10301E ↗
12. Poly(p-phenylene terephthalamide) modified PE separators for lithium ion batteries10.1016/j.memsci.2019.03.071 ↗
13. Separators for lithium-ion batteries: a review on the production processes and recent developments10.1002/ente.201402215 ↗
14. Recent progress in fluoropolymers for membranes10.1016/j.progpolymsci.2013.07.008 ↗
15. In situ welding: superb strength, good wettability and fire resistance tri-layer separator with shutdown function for high-safety lithium ion battery10.1016/j.memsci.2019.117509 ↗
16. Thermal shrinkage and microscopic shutdown mechanism of polypropylene separator for lithium-ion battery: in-situ ultra-small angle X-ray scattering study10.1016/j.memsci.2017.10.001 ↗
17. Structural evolution of hard-elastic isotactic polypropylene film during uniaxial tensile deformation: the effect of temperature10.1021/acs.macromol.8b00255 ↗
18. A semi-quantitative deformation model for pore formation in isotactic polypropylene microporous membrane10.1016/j.polymer.2015.10.067 ↗
19. Development of microporous PE films to improve lithium ion batteries10.1038/pj.2010.25 ↗
20. Effect of polymer blending and drawing conditions on properties of polyethylene separator prepared for Li-ion secondary battery10.1016/S0378-7753(02)00097-6 ↗
21. Pore formation mechanism of β nucleated polypropylene stretched membranes10.1039/C4RA03589E ↗
22. Coating with macroporous polyarylate via a nonsolvent induced phase separation process for enhancement of polyethylene separator thermal stability10.1016/j.memsci.2010.02.020 ↗
23. Plastic deformation and solid-phase transformation in β-phase polypropylene10.1002/macp.1989.021900423 ↗
24. Crystal transformation and micropore formation during uniaxial drawing of β-form polypropylene film10.1016/0032-3861(95)91197-F ↗
25. Structure and gas permeability of microporous films prepared by biaxial drawing of β-form polypropylene10.1016/0032-3861(96)83143-0 ↗
26. On deformation mechanisms of β-polypropylene 2. Changes of lamellar structure caused by tensile load10.1016/S0032-3861(98)00412-1 ↗
27. On deformation mechanisms of β-polypropylene 3. Lamella structures after necking and cold drawing10.1016/S0032-3861(98)00578-3 ↗
28. Studies on the pore formation mechanism of β-crystalline polypropylene under stretching
29. Pore formation mechanism of oriented β polypropylene cast films during stretching and optimization of stretching methods: in-situ SAXS and WAXD studies10.1016/j.polymer.2018.12.051 ↗
30. Oriented polypropylene cast films consisted of β-transcrystals induced by the nucleating agent self-assembly and its homogeneous membranes with high porosity10.1016/j.polymer.2018.07.066 ↗
31. Deformation and pore formation mechanism under tensile loading in isotactic polypropylene10.1002/pi.5364 ↗
32. Three-dimensional crystal structure evolution and micropore formation of β-iPP during biaxial stretching10.1016/j.polymer.2020.122471 ↗
33. Pore formation and evolution mechanism during biaxial stretching of β-iPP used for lithium-ion batteries separator
34. Tri-layer nonwoven membrane with shutdown property and high robustness as a high-safety lithium ion battery separator10.1016/j.memsci.2018.07.094 ↗
35. Robust polyetherimide fibrous membrane with crosslinked topographies fabricated via in-situ micro-melting and its application as superior Lithium-ion battery separator with shutdown function10.1016/j.memsci.2017.12.015 ↗
36. F. Jiang, X. Cheng, S. Yang, S. Yang, J. Xie, H. Yuan, L. Liu, J. Huang, Q. Zhang. Thermoresponsive electrolytes for safe lithium metal batteries. Adv. Mater.. 35(2023) 202209114..10.1002/adma.202209114 ↗
37. Electrospun PU@GO separators for advanced lithium ion batteries10.1016/j.memsci.2018.03.027 ↗
38. Anchoring porous F-TiO2 particles by directed-assembly on PMIA separators for enhancing safety and electrochemical performances of Li-ion batteries10.1016/j.electacta.2023.141926 ↗
39. A critical review on materials and fabrications of thermally stable separators for lithium‐ion batteries
40. Thermo-responsive polymers and advances in their applications in separation science
41. Low-cost mass manufacturing technique for the shutdown-functionalized lithium-ion battery separator based on Al2O3 coating online construction during the β-iPP cavitation process10.1021/acsami.1c22080 ↗
42. TiO2 nanoshell@polyimide nanofiber membrane prepared via a surface-alkaline-etching and in-situ complexation-hydrolysis strategy for advanced and safe LIB separator10.1016/j.memsci.2019.02.003 ↗
43. Metal organic framework derivative improving lithium metal anode cycling10.1002/adfm.201907579 ↗
44. Cellulose nanocrystal/poly(ethylene glycol) composite as an iridescent coating on polymer substrates: structure-color and interface adhesion10.1021/acsami.6b12044 ↗
45. Recent progress of novel non-carbon anode materials for potassium-ion battery10.1016/j.ensm.2022.06.046 ↗
46. Three dimensional molecular orientation of isotactic polypropylene films under biaxial deformation at higher temperatures10.1016/j.polymer.2015.07.049 ↗
47. A new approach to the characterization of molecular orientation in uniaxially and biaxially oriented samples of poly(ethylene terephthalate)10.1016/S0032-3861(98)00574-6 ↗
48. Monitoring elasticity and orientation in syndiotactic polypropylene10.1016/j.polymer.2005.05.144 ↗
49. Characterization of molecular orientation in polymeric products by Fourier transform infrared spectroscopy using diffuse reflectance optics10.1021/ma00015a008 ↗
50. Rheooptical Fourier transform infrared spectroscopy of the deformation behavior in quenched and slow-cooled isotactic polypropylene films10.1002/polb.10304 ↗
51. Influence of oriented β‐lamellae on deformation and pore formation in β‐nucleated polypropylene10.1002/polb.24423 ↗
52. Low-cost and large-scale fabricating Technology for high-performance lithium-ion battery composite separators with connected nano-AlO3 coating10.1021/acsaem.1c03137 ↗
53. Facile manufacture technique for lithium-ion batteries composite separator via online construction of fumed SiO2 coating
54. Poly(ethylene oxide)-co-Poly(propylene oxide)-based gel electrolyte with high ionic conductivity and mechanical integrity for lithium-ion batteries10.1021/am4019115 ↗
55. High lithium transference number electrolytes via creation of 3-dimensional, charged, nanoporous networks from dense functionalized nanoparticle composites10.1021/cm303091j ↗
56. Dependence of lithium metal battery performances on inherent separator porous structure regulation10.1016/j.jechem.2023.06.002 ↗
57. Mechanical behaviors and ion transport variation of lithium-ion battery separators under various compression conditions10.1016/j.jpowsour.2022.231838 ↗
58. Designing polyolefin separators to minimize the impact of local compressive stresses on lithium ion battery performance10.1149/2.0041809jes ↗
59. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗