Effects of concentrated CO2 on the performance of a PBI/H3PO4 high temperature proton exchange membrane fuel cell
Source abstract
Abstract
In this study, the impact of mimic reformate of formic acid decomposition on the anode polarization of HT-PEMFC is investigated under various operating conditions of the anode, including different concentrations of CO 2, N 2, CO, and humidification. Polarization curve and EIS measurements indicate that there is no significant difference (less than 5 mV when i < 0.4A/cm 2) between the same concentrations of CO 2 and N 2 up to 75 vol%. No significant poisoning of the anode by CO 2 (up to 75 vol%) has been observed, suggesting that the addition of concentrated CO 2 acts more as a diluent than a poison. Upon separating the polarization effects, it is found that the oxygen reduction reaction (ORR) is a crucial step limiting the fuel cell performance, with cathodic activation losses reaching as high as 70 % at 0.8A/cm 2. However, with 1 vol% CO in a H 2/CO 2 1/1 mixture, a significant poisoning effect on the fuel cell is observed. DRT (distribution of relaxation times) analyses reveal two peaks related to CO in high-frequency regions above 100 Hz associated with the anode polarization, with the peak integration being five times larger than in pure hydrogen. Humidification doesn`t improve the voltage or mitigate CO poisoning. A one-dimensional flux model that includes the anode polarization is developed to analyze the polarizations for both cathode and anode under different concentrations of diluents, well describing the experimental results. When i < 0.8 A/cm 2, the predicted values from the model closely match the measured values (within 5–10 mV). Calculations suggest that the anode polarization cannot be ignored, especially when the anode is fed with diluted gases.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Development of highly active and durable platinum core-shell catalysts for polymer electrolyte fuel cells10.1627/jpi.58.55 ↗
2. Gas crossover and membrane degradation in polymer electrolyte fuel cells10.1016/j.electacta.2006.03.008 ↗
3. A review on methanol crossover in direct methanol fuel cells: challenges and achievements10.1002/er.1889 ↗
4. High-capacity LiNi0.8Co0.1Mn0.1O2 positive-electrodes in the nearly saturated and fluorinated acetate-diluted electrolyte solutions10.1021/acsaem.3c03119 ↗
5. Solvation-controlled ester-based concentrated electrolyte solutions for high-voltage lithium-ion batteries10.1016/j.coelec.2018.03.032 ↗
6. Dilution of highly concentrated LiBF4/propylene carbonate electrolyte solution with fluoroalkyl ethers for 5-V LiNi0.5Mn1.5O4Positive electrodes10.1149/2.0611701jes ↗
7. Formic acid as a hydrogen energy carrier10.1021/acsenergylett.6b00574 ↗
8. Zhang · 2020 · vol. 2020
9. Catalyst development for high‐temperature polymer electrolyte membrane fuel cell (HT‐PEMFC) applications10.1002/adma.202302207 ↗
10. New perspectives on fuel cell technology: a brief review10.3390/membranes10050099 ↗
11. A review of automotive proton exchange membrane fuel cell degradation under start-stop operating condition10.1016/j.apenergy.2018.04.049 ↗
12. Main factors affecting the lifetime of Proton Exchange Membrane fuel cells in vehicle applications: a review10.1016/j.apenergy.2014.03.048 ↗
13. Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions10.1016/j.pecs.2020.100859 ↗
14. The reactant starvation of the proton exchange membrane fuel cells for vehicular applications: a review10.1016/j.enconman.2018.12.049 ↗
15. Quantifying desorption and rearrangement rates of carbon monoxide on a PEM fuel cell electrode10.1016/j.electacta.2009.04.049 ↗
16. PEM fuel cell reaction kinetics in the temperature range of 23-120°C10.1016/j.electacta.2006.09.008 ↗
17. Fuel cell-battery hybrid systems for mobility and off-grid applications: a review10.1016/j.rser.2020.110119 ↗
18. Long term testing in continuous mode of HT-PEMFC based H3PO4/PBI celtec-P MEAs for μ-CHP applications10.1002/fuce.200800134 ↗
19. Operando synchrotron-based X-ray study and intervention approaches of graphene-related-materials for investigating the performance and durability of HT-PEMFC10.1016/j.cej.2024.150670 ↗
20. Performance analysis of HT-PEFC stacks10.1016/j.ijhydene.2012.02.190 ↗
21. Fabrication of novel binderless anode via electrophoretic deposition for HT-PEMFC10.1080/02670844.2019.1597426 ↗
22. Corrigendum to “Computational analysis of the impact of a micro porous layer (MPL) on the characteristics of a high temperature PEMFC” [Electrochim. Acta 333 (2020) 135552]10.1016/j.electacta.2020.135704 ↗
23. Maximizing the efficiency of a HT-PEMFC system integrated with glycerol reformer10.1016/j.ijhydene.2012.01.089 ↗
24. Theoretical analysis of a glycerol reforming and high-temperature PEMFC integrated system: hydrogen production and system efficiency10.1016/j.fuel.2012.07.036 ↗
25. Energy, exergy and exergo-economic analysis of a novel HT-PEMFC based cogeneration system integrated with plasma gasification of food waste10.1016/j.applthermaleng.2024.122924 ↗
26. Catalysts for H 2 production using the ethanol steam reforming (a review)10.1016/j.ijhydene.2014.08.072 ↗
27. Homogeneous catalysis for sustainable hydrogen storage in formic acid and alcohols10.1021/acs.chemrev.7b00182 ↗
28. Energy and exergy performance assessments of a high temperature-proton exchange membrane fuel cell based integrated cogeneration system10.1016/j.ijhydene.2019.01.252 ↗
29. CO2 as a hydrogen vector - transition metal diamine catalysts for selective HCOOH dehydrogenation10.1039/C6DT04638J ↗
30. Benchmarking catalysts for formic acid/formate electrooxidation10.3390/molecules26164756 ↗
31. Structural analysis of transient reaction intermediate in formic acid dehydrogenation catalysis using two-dimensional IR spectroscopy10.1073/pnas.1809342115 ↗
32. Unveiling the pressure dependent deactivation mechanism of iridium-based catalysts for hydrogen production from formic acid aqueous solutions10.1016/j.ijhydene.2024.05.406 ↗
33. Biohydrogen production from cornstalk wastes by anaerobic fermentation with activated sludge10.1016/j.ijhydene.2009.07.024 ↗
34. A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation10.1016/j.jpowsour.2006.12.012 ↗
35. Transient carbon monoxide poisoning of a polymer electrolyte fuel cell operating on diluted hydrogen feed10.1016/j.electacta.2004.01.014 ↗
36. Fuel cells for transportation10.1016/0378-7753(90)80024-8 ↗
37. Components for PEM fuel cell systems using hydrogen and CO containing fuels10.1016/S0013-4686(98)00140-6 ↗
38. Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell10.1016/j.jpowsour.2009.02.025 ↗
39. Huang · 2022
40. Huang Kuo-Wei (Sa) · 2021
41. Properties of high-temperature PEFC Celtec®-P 1000 MEAs in start/stop operation mode10.1016/j.jpowsour.2007.08.055 ↗
42. Evaluation of Tafel–Volmer kinetic parameters for the hydrogen oxidation reaction on Pt(110) electrodes10.1016/j.jpowsour.2010.12.016 ↗
43. Tafel kinetics of electrocatalytic reactions: from experiment to first-principles10.1021/cs501312v ↗
44. Modelling study of CO2 poisoning on PEMFC anodes10.1016/j.jpowsour.2004.05.004 ↗
45. Sensitivity analysis of anode overpotential during start-up process of a high temperature proton exchange membrane fuel cell10.1016/j.electacta.2015.07.090 ↗
46. Sectional electrochemical impedance analysis of a high temperature polymer electrolyte membrane fuel cell with three types of flow-fields10.1016/j.electacta.2013.08.142 ↗
47. Electrochemical impedance spectroscopy of catalyst and carbon degradations in proton exchange membrane fuel cells10.1016/j.jpowsour.2019.226922 ↗
48. Use of electrochemical impedance spectroscopy for the evaluation of performance of PEM fuel cells based on carbon cloth gas diffusion electrodes10.1155/2018/3254375 ↗
49. How the distribution of relaxation times enhances complex equivalent circuit models for fuel cells10.1016/j.electacta.2020.136764 ↗
50. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
51. Experimental investigation of carbon monoxide poisoning effect on a PBI/H3PO4 high temperature polymer electrolyte membrane fuel cell: influence of anode humidification and carbon dioxide10.1016/j.ijhydene.2015.09.056 ↗
52. Modeling and optimization of high temperature proton exchange membrane electrolyzer cells10.1080/15435075.2021.1974450 ↗
53. Modeling CO2 reduction on Pt(111)10.1039/c3cp50645b ↗
54. Theoretical assessments of CO2 activation and hydrogenation pathways on transition-metal surfaces10.1016/j.apsusc.2023.157873 ↗
55. Theoretical study of CO2 adsorption on Pt10.1039/C9NJ03092A ↗
56. Theoretical investigation of CO2 adsorption and dissociation on low index surfaces of transition metals10.1021/acs.jpcc.7b12660 ↗
57. Adsorption of CO2 on terrace, step, and defect sites on Pt surfaces: a combined TPD, XPS, and DFT study10.1021/acs.jpcc.1c05228 ↗
58. CO2 hydrogenation on Pt, Pt/SiO2 and Pt/TiO2: importance of synergy between Pt and oxide support10.1016/j.jcat.2015.12.019 ↗
59. Deciphering dynamic structural and mechanistic complexity in Cu/CeO2/ZSM-5 catalysts for the reverse water-gas shift reaction10.1021/acscatal.0c01584 ↗
60. Atomically dispersed Pt/CeO2 catalyst with superior CO selectivity in reverse water gas shift reaction10.1016/j.apcatb.2021.120101 ↗
61. Effect of gas composition and gas utilisation on the dynamic response of a proton exchange membrane fuel cell10.1016/j.jpowsour.2008.01.037 ↗
62. Transient analysis of carbon monoxide transport phenomena and adsorption kinetics in HT-PEMFC during dynamic current extraction10.1016/j.electacta.2015.02.204 ↗
63. Temperature dependence of CO poisoning in high-temperature proton exchange membrane fuel cells with phosphoric acid-doped polybenzimidazole membranes10.1016/j.ijhydene.2015.01.107 ↗
64. Three-dimensional non-isothermal modeling of carbon monoxide poisoning in high temperature proton exchange membrane fuel cells with phosphoric acid doped polybenzimidazole membranes10.1016/j.fuel.2010.10.018 ↗
65. A review of recent development: transport and performance modeling of PEM fuel cells10.1016/j.apenergy.2015.12.075 ↗
66. Experimental investigation and numerical simulation of the electrolyte loss in a HT-PEM fuel cell10.1016/j.ijhydene.2014.11.041 ↗
67. Distribution of relaxation times analysis of high-temperature PEM fuel cell impedance spectra10.1016/j.electacta.2017.02.011 ↗
68. Understanding the role of the anode on the polarization losses in high-temperature polymer electrolyte membrane fuel cells using the distribution of relaxation times analysis10.1016/j.jpowsour.2020.228469 ↗
69. Distribution of relaxation times analysis of electrochemical hydrogen pump impedance spectra10.1016/j.jpowsour.2023.233203 ↗
70. The influence of CO on the current density distribution of high temperature polymer electrolyte membrane fuel cells10.1016/j.electacta.2011.08.039 ↗
71. An innovative Approach to predict the diffusion rate of Reactant's effects on the performance of the polymer electrolyte membrane fuel cell10.3390/math11194094 ↗
72. Introducing a new serpentine configuration of gas channels to enhance the performance and reduce the water flooding in the PEMFC
73. Development of a one-dimensional and semi-empirical model for a high temperature proton exchange membrane fuel cell10.1016/j.ijhydene.2017.10.148 ↗
74. Numerical modeling of the degradation rate for membrane electrode assemblies in high temperature proton exchange membrane fuel cells and analyzing operational effects of the degradation10.1016/j.ijhydene.2015.01.185 ↗