Rheological effect of particle volume fraction and chemical additives on tape casting slurry optimization for solid oxide fuel cells application
Source abstract
Abstract
This study analyzes the impact of particle volume fraction and various chemical additives on tape-casting slurries from a rheological perspective. Tape casting, a method prevalently employed for fabricating substrates for fuel cells, dictates the morphological characteristics of the substrates contingent upon the slurry properties. These characteristics are modulated not solely by the intrinsic properties of the ceramic particles but also through the incorporation of chemical additives. The rheological properties of the slurry were scrutinized through various methodologies, with alterations in parameters and particle characteristics. Moreover, the relationship between the rheological properties and the green body was elucidated by examining mechanical properties, such as bending strength. Subsequently, leveraging the anode support generated through this methodology, a cell is fabricated. Performance evaluations substantiate a maximum power density of 2.41W/cm 2 in a fuel cell (FC) mode, a current density of 0.84A/cm 2 at 1.3V in electrolysis cell (EC) mode at 700 °C is evidenced, indirectly signifying adequate dispersion and the presence of pores at the anode support even without pore former. Next, electrochemical impedance spectroscopy (EIS) is conducted, followed by an in-depth analysis employing the distribution of relaxation times (DRT) technique. The findings confirm the successful fabrication of an electrochemically stable and robust fuel cell.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Coal Combustion and Slurry Processing · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Hydrogen fuel and fuel cell technology for cleaner future: a review10.1007/s11356-020-12231-8 ↗
2. Solid oxide fuel cell: Decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
3. Worldwide Status of solid oxide fuel cell technology10.1149/09601.0001ecst ↗
4. Electrochemical impedance analysis of SOFC with transmission line model using distribution of relaxation times (DRT)10.1149/1945-7111/aba00f ↗
5. One step infiltration induced multi-cation oxide nanocatalyst for load proof SOFC application10.1016/j.apcatb.2019.118374 ↗
6. Fuel cell materials and components☆☆☆The Golden Jubilee issue—selected topics in materials science and engineering: past, present and future10.1016/j.actamat.2003.08.004 ↗
7. Review of solid oxide fuel cell materials: cathode, anode, and electrolyte10.1007/s41825-020-00029-8 ↗
8. SrCo0.8Ti0.1Ta0.1O3-δ perovskite: a new highly active and durable cathode material for intermediate-temperature solid oxide fuel cells10.1016/j.compositesb.2021.108726 ↗
9. Parametric study for electrode microstructure influence on SOFC performance10.1016/j.ijhydene.2021.09.057 ↗
10. Understanding the oxygen reduction reaction in the hierarchically oriented composite cathode with open, straight pores10.1016/j.seppur.2023.124713 ↗
11. Peak power optimization of solid oxide fuel cells with particle size and porosity grading10.1149/06113.0033ecst ↗
12. The relation of microstructure, materials properties and impedance of SOFC electrodes: a case study of Ni/GDC anodes10.3390/en13040987 ↗
13. Performance of La0.1Sr0.9Co0.8Fe0.2O3− and La0.1Sr0.9Co0.8Fe0.2O3−–Ce0.9Gd0.1O2 oxygen electrodes with Ce0.9Gd0.1O2 barrier layer in reversible solid oxide fuel cells10.1016/j.jpowsour.2013.03.154 ↗
14. Microstructural and electrochemical impedance study of nickel–Ce0.9Gd0.1O1.95 anodes for solid oxide fuel cells fabricated by ultrasonic spray pyrolysis10.1016/j.jpowsour.2010.11.117 ↗
15. Numerical analysis of the relation between the porosity of the fuel electrode support and functional layer, and performance of solid oxide fuel cells using computational fluid dynamics10.1016/j.ijhydene.2023.06.166 ↗
16. Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells10.1016/j.jpowsour.2019.227599 ↗
17. Solvent effects on the morphology and performance of the anode substrates for solid oxide fuel cells10.1016/j.jpowsour.2017.07.110 ↗
18. Understanding the polymer binder effect on the microstructure and performance of micro-tubular solid oxide fuel cells with continuously graded pores fabricated by the phase inversion method10.1016/j.apsusc.2022.155928 ↗
19. Flow behavior of gadolinium doped ceria under different polymeric and hydrodynamic environment for tape casting application10.1007/s11814-022-1271-4 ↗
20. Fabrication of porous titania sheet via tape casting: microstructure and water permeability study10.1016/j.ceramint.2019.12.103 ↗
21. A study in a tape casting based stereolithography apparatus: role of layer thickness and casting shear rate10.1016/j.jmapro.2021.02.040 ↗
22. Fabrication and rheological behavior of tape‐casting slurry for ultra‐thin multilayer transparent ceramics10.1111/ijac.13421 ↗
23. Effects of pore former type on mechanical and electrochemical performance of anode support microtubes in solid oxide fuel cells10.1016/j.ijhydene.2022.01.178 ↗
24. A wrapped and infiltrated ∼20-μm-thick 3D ceramic framework composite enables fast Li+ diffusion and interfacial compatibility for lithium-metal batteries10.1016/j.compositesb.2024.111192 ↗
25. Tape casting and characterization of yttrium iron garnet ferrite thick film for microwave substrate application10.1016/j.ceramint.2019.11.126 ↗
26. Tape-cast Ce-substituted Li 7 La 3 Zr 2 O 12 electrolyte for improving electrochemical performance of solid-state lithium batteries10.1039/D2TA06808G ↗
27. Composite polymer electrolyte incorporating WO3 nanofillers with enhanced performance for dendrite-free solid-state lithium battery10.1016/j.ceramint.2022.09.333 ↗
28. Investigating the performance of Glass/Al2O3 composite seals in planar solid oxide fuel cells10.1016/j.compositesb.2020.107984 ↗
29. The rapid one-step fabrication of bilayer anode for protonic ceramic fuel cells by phase inversion tape casting10.1016/j.jeurceramsoc.2020.02.020 ↗
30. Effects of organic additives on the properties of boronsilicate glass/Al 2 O 3 composites tape casting slurries and green Tapes
31. Tape casting technique for fabrication of Piezoelectric ceramics and other Multilayered Devices-A review10.37155/2717-526X-0302-1 ↗
32. Colloidal processing fundamentals
33. Analysis of fractal aggregates in a colloidal suspension of carbon black from its sedimentation and viscosity behavior10.1007/s13367-016-0028-1 ↗
34. Fractal morphology and Breakage of DLCA and RLCA aggregates10.1006/jcis.1999.6565 ↗
35. Effects of volume fraction and surface area of aggregates on the static yield stress and structural Build-Up of Fresh Concrete10.3390/ma13071551 ↗
36. Rheological and pumping behaviour of 3D printable cementitious materials with varying aggregate content10.1016/j.cemconres.2020.106258 ↗
37. A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization10.1016/j.ceramint.2021.01.031 ↗
38. Enhanced performance of reversible solid oxide fuel cells by densification of Gd0.1Ce0.9O2−δ (GDC) barrier layer/La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF6428)-GDC oxygen-electrode interface10.1016/j.jallcom.2023.173296 ↗
39. Microstructural changes in a colloidal liquid in the shear thinning and shear thickening regimes10.1063/1.479245 ↗
40. Experimental and theoretical investigations of the rheological and electrical behavior of nanocomposites with universal percolation networks10.1016/j.compositesb.2021.109317 ↗
41. S.B. Reddy, P.P. Singh, N. Raghu, V. Kumar, Effect of Type of Solvent and Dispersant on NANO PZT Powder Dispersion for Tape Casting Slurry, (n.d.).
42. The role of plasticizer in optimizing the rheological behavior of ceramic pastes intended for stereolithography-based additive manufacturing10.1016/j.jeurceramsoc.2020.08.013 ↗
43. Organic processing additives
44. Recent advances in adsorbents for the removal of phthalate esters from water: material, modification, and application10.1016/j.cej.2020.128127 ↗
45. Effects of plasticizers and Clays on the physical, chemical, mechanical, thermal, and morphological properties of Potato Starch-based Nanocomposite films10.1021/acsomega.0c02012 ↗
46. Characterization of nanoparticles made of ethyl cellulose and stabilizing lipids: mode of manufacturing, size modulation, and study of their effect on keratinocytes10.1016/j.ijpharm.2021.121003 ↗
47. Pyrolysis of polyvinyl butyral (PVB) binder in thermoelectric green tapes10.1016/S0955-2219(99)00236-8 ↗
48. An efficient two-polymer binder for high-performance Silicon Nanoparticle-based lithium-ion batteries: a systematic Case study with commercial Polyacrylic acid and polyvinyl butyral polymers10.1149/2.0371903jes ↗
49. A mechanism for non-Newtonian flow in suspensions of Rigid Spheres10.1122/1.548848 ↗
50. Effect of microstructure on the viscosity of hard sphere dispersions and modulus of composites10.1016/0033-0655(94)87001-2 ↗
51. Flow equation for pigment-oil suspensions of the printing ink-type
52. Settling by cluster Deposition in aggregating colloidal suspensions10.1006/jcis.1996.0135 ↗
53. Aggregation and sedimentation in colloidal suspensions10.1103/PhysRevLett.74.1478 ↗
54. Characterization of particle aggregation in a colloidal suspension of magnetite particles10.1016/j.jiec.2014.12.038 ↗
55. ON the MICRORHEOLOGICAL MODELING OF AGGREGATING COLLOIDS10.1080/01932699208943332 ↗
56. On the Computer simulation of the deformation and Breakup of colloidal aggregates in shear flow10.1006/jcis.1993.1202 ↗
57. Rheological modelling of complex fluids. I. The concept of effective volume fraction revisited10.1051/epjap:1998125 ↗
58. A mean field theory for the rheology of phase separated or flocculated dispersions10.1016/0166-6622(88)80205-1 ↗
59. Rheology of concentrated disperse systems and minimum energy dissipation principle: I. Viscosity-concentration relationship10.1007/BF01516932 ↗
60. Scaling behavior of the elastic properties of colloidal gels10.1103/PhysRevA.42.4772 ↗
61. Rheological analysis of particle aggregation in a colloidal suspension of carbon black particles10.1007/s13367-018-0019-5 ↗
62. Mewis · 2011
63. Strength characterization and lifetime prediction of dental ceramic materials10.1016/j.dental.2020.10.015 ↗
64. Dependence of hydrogen oxidation reaction on water vapor in anode-supported solid oxide fuel cells10.1016/j.ssi.2021.115565 ↗
65. Gas Humidification impact on the properties and performance of perovskite‐type functional materials in Proton‐conducting solid oxide cells10.1002/adfm.201802592 ↗
66. Analysis of polarization characteristics and optimal operating conditions for industrial-sized SOFC based on comparison with button cells10.1016/j.ijhydene.2023.06.277 ↗
67. Boosting the performance and durability of Ni/YSZ cathode for hydrogen production at high current densities via decoration with nano-sized electrocatalysts10.1039/C8NR07678B ↗
68. Durability of high performance Ni–yttria stabilized zirconia supported solid oxide electrolysis cells at high current density10.1016/j.jpowsour.2014.03.133 ↗
69. Call attention to using DRT and EIS to quantify the contributions of solid oxide cell components to the total impedance10.1016/j.ijhydene.2022.08.093 ↗
70. Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements10.1016/j.jpowsour.2019.226838 ↗
71. Physicochemical analysis of infiltrated cathode symmetric cells for intermediate temperature SOFCs10.1016/j.electacta.2023.143329 ↗
72. Degradation evaluation by distribution of relaxation times analysis for microtubular solid oxide fuel cells10.1016/j.electacta.2020.135913 ↗
73. Oxygen transport Kinetics of Mixed ionic-electronic Conductors by Coupling focused ion Beam Tomography and electrochemical impedance spectroscopy10.1149/2.0851704jes ↗