journal article·2024-06

Achieving triple improvements in intrinsic properties for porous flow field materials and the proton exchange membrane fuel cell electrochemical performance

Xueliang Wang, Yuhao Wu, Hui Cai, Zhaoguo Jin, Zhiguo Qu, Wenquan Tao

Publisher page

Abstract

Three-dimensional (3D) porous flow fields have been utilized to achieve ultrahigh power density for proton exchange membrane fuel cells (PEMFCs). However, issues such as the severe corrosion and high interface contact resistance of 3D porous flow field limit the effective enhancement in power density. In this work, porous flow fields with various pore structures, i.e., Ni foam and Ti felt are employed and further decorated with carbon coating using the chemical vapor deposition (CVD) method to improve the anti-corrosion capacity. Meanwhile, the through-plane electrical conductivity and hydrophobicity are collectively improved for Ni foam and Ti felt by the carbon coating. Single fuel cell (FC) tests show that both the peak power density (PPD) and limiting current density (LCD) are improved for PEMFCs assembled with C@Ni foam and C@Ti felt flow fields in the cathode. The corresponding electrochemical impedance spectroscopy (EIS) confirms that the improved PPD (C@Ti felt) is attributed to the collective improvements in electrical conductivity and anti-corrosion capacity, and the improved LCD (C@Ni foam) is attributed to enhanced water removal capacity. The triple improvements in the intrinsic property of porous flow field materials obtained in this work are expected to offer novel approaches for developing PEMFCs with ultrahigh power density.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Current topics proposed by PEFC manufacturers, etc. – current status and topics of fuel cells for FCV
2. Interfacial contact resistance in polymer electrolyte membrane fuel cells: recent developments and challenges10.1016/j.rser.2019.109351 ↗
3. Flow field plates with trap-shape channels to enhance power density of polymer electrolyte membrane fuel cells10.1016/j.ijheatmasstransfer.2018.10.050 ↗
4. Thin metallic wave-like channel bipolar plates for proton exchange membrane fuel cells: Deformation behavior, formability analysis and process design
5. Modeling, design, materials and fabrication of bipolar plates for proton exchange membrane fuel cell: a review10.1016/j.apenergy.2021.117443 ↗
6. Numerical and experimental investigation of 3D flow field bipolar plates for PEMFCs by metal 3D printing10.1016/j.fuel.2023.129699 ↗
7. Experimental performance of proton exchange membrane fuel cell with novel flow fields and numerical investigation of water-gas transport enhancement
8. Heat and mass transfer characteristics of a novel three-dimensional flow field metal bipolar plate for PEMFC by laser 3D printing10.1016/j.ijhydene.2023.10.024 ↗
9. Optimization of porous media flow field for proton exchange membrane fuel cell using a data-driven surrogate model10.1016/j.enconman.2020.113513 ↗
10. Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field10.1016/j.applthermaleng.2019.114464 ↗
11. Performance investigation on a novel 3D wave flow channel design for PEMFC10.1016/j.ijhydene.2020.06.057 ↗
12. Development of compact and high-performance fuel cell stack10.4271/2015-01-1175 ↗
13. Multi-phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field10.1002/er.4215 ↗
14. Application of porous materials for the flow field in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2021.229664 ↗
15. Three-dimensional multi-phase simulation of PEM fuel cell considering the full morphology of metal foam flow field10.1016/j.ijhydene.2020.05.263 ↗
16. Oxygen transport in proton exchange membrane fuel cells with metal foam flow fields10.1016/j.jpowsour.2021.230937 ↗
17. Experimental performance investigation on the arrangement of metal foam as flow distributors in proton exchange membrane fuel cell10.1016/j.enconman.2021.113846 ↗
18. Three-dimensional performance simulation of PEMFC of metal foam flow plate reconstructed with improved full morphology10.1016/j.ijhydene.2023.03.334 ↗
19. Study on the metal foam flow field with porosity gradient in the polymer electrolyte membrane fuel cell10.1016/j.renene.2020.04.142 ↗
20. Enhanced corrosion resistance of Ni/Sn nano-electrodeposited metal foam for flow field application in simulated PEMFC cathode environment10.1016/j.ijhydene.2022.08.106 ↗
21. Contamination assessment in metal foam flow field-based proton exchange membrane fuel cell10.1016/j.ijhydene.2021.12.100 ↗
22. Enhancement of mass transport in fuel cells using three-dimensional graphene foam as flow field10.1016/j.electacta.2018.01.191 ↗
23. Formation of 3D graphene–Ni foam heterostructures with enhanced performance and durability for bipolar plates in a polymer electrolyte membrane fuel cell10.1039/C7TA07598G ↗
24. Gas diffusion layer/flow-field unified membrane-electrode assembly in fuel cell using graphene foam
25. Three-dimensional Printed graphene foams10.1021/acsnano.7b01987 ↗
26. Three dimensional graphene composites: preparation, morphology and their multi-functional applications10.1016/j.compositesa.2022.107335 ↗
27. Hydroplastic foaming of graphene aerogels and artificially intelligent tactile sensors10.1126/sciadv.abd4045 ↗
28. Fuel cell stack redesign and component integration radically increase power density10.1016/j.joule.2023.12.003 ↗
29. Gas diffusion layer/flow-field unified membrane-electrode assembly in fuel cell using graphene foam10.1016/j.electacta.2019.134808 ↗
30. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
31. Production of hydrogen and nanofibrous carbon by selective catalytic decomposition of propane10.1016/j.ijhydene.2008.11.045 ↗
32. Achieving high electrochemical performance of PEMFCs with ultrathin and highly conductive graphite-resin composite bipolar plates10.1016/j.ijhydene.2023.11.190 ↗
33. Ex situ evaluation of nanometer range gold coating on stainless steel substrate for automotive polymer electrolyte membrane fuel cell bipolar plate10.1016/j.jpowsour.2009.09.022 ↗
34. Electrodeposition of graphene nano-thick coating for highly enhanced performance of titanium bipolar plates in fuel cells10.1016/j.ijhydene.2019.04.245 ↗
35. Synergetic improvements in surface hydrophobicity and wear resistance of TC4 materials via the combination of rapid heating and EtOH quenching methods10.1016/j.jallcom.2023.172582 ↗
36. Enhancing water transport performance of gas diffusion layers through coupling manipulation of pore structure and hydrophobicity10.1016/j.jpowsour.2022.231121 ↗
37. Collective enhancement in hydrophobicity and electrical conductivity of gas diffusion layer and the electrochemical performance of PEMFCs10.1016/j.jpowsour.2023.233077 ↗