Constructing supercapacitors with biopolymer bearing zwitterion as hydrogel electrolyte and binder for superior performance at −40 °C
Source abstract
Abstract
This study demonstrates how to construct supercapacitors with biopolymer bearing zwitterion as hydrogel electrolyte and binder for superior performance at the temperature of −40 °C. Carboxylated chitosan (CCS) and carboxymethyl cellulose (CMC) are used as hydrogel electrolyte and binder respectively, as well as, subject to oxa-Mickael addition with sulfobetaine methacrylate (SBMA) to obtain CCS-SBMA and CMC-SBMA. For electrolytes, CCS and CCS-SBMA hydrogel electrolytes are prepared by different concentrations of NaClO 4 intake at swelling ratio of 8.5. Among all electrolytes, there exist the highest ionic conductivities 9 mS cm −1 and 25 mS cm −1 in CCS and CCS-SBMA with 10 m and 12 m NaClO 4 respectively. Accordingly, CCS-10 and CCS-SBMA-12 are used for Arrhenius plot from 25 °C to −40 °C. Surprisingly, the ionic conductivity in CCS-SBMA-12 at −40 °C (9.48 mS cm −1) is still higher than one in CCS-10 at 25 °C (8.23 mS cm −1 ). CCS-SBMA-12 is used for supercapacitors with CMC and CMC-SBMA as binders, respectively as SCs-CMC and SCs-CMC-SBMA. SCs-CMC shows poor performance below −0 °C due to the crystallization of CMC, corroborated by Differential scanning calorimetry. In contrast, SCs-CMC-SBMA still possesses 33 F∙g −1 at −40 °C. This study gives some light on the superior performance of supercapacitor with hydrogel electrolyte at −40 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Biopolymers-derived materials for supercapacitors: recent trends, challenges, and future prospects10.3390/molecules27196556 ↗
2. Chitin and chitosan based biopolymer derived electrode materials for supercapacitor applications: a critical review10.1016/j.jiec.2021.08.019 ↗
3. Chitosan production from Paecilomyces saturatus using three monosaccharides via mixture design10.1016/j.ijbiomac.2019.08.256 ↗
4. The chitosan hydrogels: from structure to function10.1039/C8NJ03482F ↗
5. Chitosan hydrogels in 3D printing for biomedical applications10.1016/j.carbpol.2021.117768 ↗
6. Chitosan nanocapsule-mounted cellulose nanofibrils as nanoships for smart drug delivery systems and treatment of avian trichomoniasis10.1016/j.jtice.2018.07.014 ↗
7. Applications of chitosan in food, pharmaceuticals, medicine, cosmetics, agriculture, textiles, pulp and paper, biotechnology, and environmental chemistry10.1007/s10311-019-00904-x ↗
8. pH-responsive characteristics of chitosan-based blends for controlling the adhesivity of cells10.1016/j.jtice.2020.04.022 ↗
9. Chitosan-based gel electrolyte containing an ionic liquid for high-performance nonaqueous supercapacitors10.1016/j.electacta.2012.05.073 ↗
10. Recent trends and applications of cellulose nanocrystals in food industry10.1016/j.tifs.2019.09.013 ↗
11. Applications of cellulose-based materials in sustained drug delivery systems10.2174/0929867324666170705143308 ↗
12. Natural cellulose as binder for lithium battery electrodes10.1016/j.jpowsour.2011.09.102 ↗
13. Stability and rheological study of sodium carboxymethyl cellulose and alginate suspensions as binders for lithium ion batteries10.1002/app.46217 ↗
14. An overview of the chemical modifications of chitosan and their advantages10.1680/jgrma.18.00053 ↗
15. Improving molar mass analysis of cellulose samples with limited solubility10.1016/j.carbpol.2017.09.031 ↗
16. Impact of acid type for chitosan dissolution on the characteristics and biodegradability of cornstarch/chitosan-based films10.1016/j.ijbiomac.2019.07.089 ↗
17. Functionalization of chitosan with carboxylic acids and derivatives of them: synthesis issues and prospects of practical use: a review10.3144/expresspolymlett.2018.95 ↗
18. Biopolymer-based carboxylated chitosan hydrogel film crosslinked by HCl as gel polymer electrolyte for all-solid-sate supercapacitors10.1016/j.jpowsour.2019.04.023 ↗
19. Carboxymethyl cellulose and cellulose nanocrystals from cassava stem as thickeners in reactive printing of cotton10.1007/s10570-021-03694-0 ↗
20. Development of a multifunctional wet laid nonwoven from marine waste posidonia oceanica technical fiber and CMC binder10.3390/polym14050865 ↗
21. Chitosan with various degrees of carboxylation as hydrogel electrolyte for pseudo solid-state supercapacitors10.1016/j.jpowsour.2021.229736 ↗
22. Recent trends in electrolytes for supercapacitors10.1016/j.est.2022.104222 ↗
23. An investigation of carboxylated chitosan hydrogel electrolytes for symmetric carbon-based supercapacitors at low temperatures10.1016/j.jtice.2021.07.006 ↗
24. Water-in-salt electrolyte for safe and high-energy aqueous battery10.1016/j.ensm.2020.10.011 ↗
25. A renewable hydrogel electrolyte membrane prepared by carboxylated chitosan and polyacrylamide for solid-state supercapacitors with wide working temperature range10.1016/j.jpowsour.2023.232704 ↗
26. Antifreezing zwitterionic hydrogel electrolyte with high conductivity of 12.6 mS cm− 1 at− 40° C through hydrated lithium ion hopping migration
27. A zwitterionic gel electrolyte for efficient solid-state supercapacitors10.1038/ncomms11782 ↗
28. Zwitterionic materials with disorder and plasticity and their application as non-volatile solid or liquid electrolytes10.1038/s41563-021-01130-z ↗
29. Triple capacitance via the dehydration of saturated water from carboxylated chitosan bearing zwitterion electrolytes10.1016/j.jtice.2022.104285 ↗
30. Zwitterionic copolymer‐supported ionogel electrolytes: impacts of varying the zwitterionic group and ionic liquid identities10.1002/celc.201900378 ↗
31. Zwitterionic polymer coupled with high concentrated electrolytes to achieve high ionic conductivity and wide electrochemical window for supreme specific energy aqueous supercapacitors10.1016/j.est.2021.103060 ↗
32. Acrylic acid-based zwitterionic hydrogel for improving the flexibility and performance of supercapacitors10.1016/j.jtice.2023.105297 ↗
33. Cellulose: structure and properties
34. Rate and cycle performances of supercapacitors with different electrode thickness using non-aqueous electrolyte10.1016/j.est.2015.08.002 ↗
35. Natural, cheap and environmentally friendly binder for supercapacitors10.1016/j.jpowsour.2012.07.076 ↗
36. Effects of styrene-butadiene rubber/carboxymethylcellulose (SBR/CMC) and polyvinylidene difluoride (PVDF) binders on low temperature lithium ion batteries10.1149/2.083310jes ↗
37. Managing transport properties in composite electrodes/electrolytes for all-solid-state lithium-based batteries10.1039/C9ME00050J ↗
38. Superior performances of supercapacitors and lithium-ion batteries with carboxymethyl cellulose bearing zwitterions as binders10.1016/j.jtice.2022.104263 ↗
39. Effect of conductivity, viscosity, and density of water-in-salt electrolytes on the electrochemical behavior of supercapacitors: molecular dynamics simulations and in situ characterization studies10.1039/D1MA00890K ↗
40. Low-cost “water-in-salt” hydrogel electrolyte enabled flexible supercapacitors with 2.7 V voltage and− 40° C adaptability10.1021/acsaem.3c01409 ↗
41. Towards the understanding of acetonitrile suppressing salt precipitation mechanism in a water-in-salt electrolyte for low-temperature supercapacitors10.1039/D0TA04538A ↗
42. High performance solid-state supercapacitors based on highly conductive organogel electrolyte at low temperature10.1016/j.jpowsour.2022.231102 ↗
43. Low temperature tolerant organohydrogel electrolytes for flexible solid‐state supercapacitors10.1002/aenm.201801967 ↗