journal article·2024-04

Rapid warm-up strategy for lithium-ion batteries based on temperature uniformity model of sandwich self-heating structure in multiple scenarios

Zhenyi Tao, Cheng Lin, Yu Tian, Peng Xie, Huimin Liu, Hong Zhang

Publisher page

Abstract

Lithium-ion battery heating technology is a crucial enabler for electric vehicles to operate in cold climates. Ensuring the delicate balance between temperature rise rate and temperature uniformity faces unprecedented challenges due to the poor thermal diffusivity of batteries. In order to overcome the challenges, first of all, this study proposes a sandwich self-heating structure for lithium-ion batteries and establishes a temperature uniformity model during the heating process of sandwich self-heating structure batteries. Then, the effects of duty cycle on temperature uniformity and heating rate are analyzed. Finally, a rapid warm-up strategy considering temperature uniformity is proposed to reconcile the contradiction between heating rate and temperature uniformity. The proposed rapid warm-up strategy can shorten the heating time by 16 % under three typical heating scenarios. Furthermore, the proposed strategy is applied to two other sandwich self-heating structures with different batteries, and the results show that the rapid warm-up strategy can significantly reduce the heating time and has the potential to be promoted in different types of batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Electric Vehicles and Infrastructure

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Detecting undesired lithium plating on anodes for lithium-ion batteries – a review on the in-situ methods10.1016/j.apenergy.2021.117386 ↗
2. Electric vehicle battery technologies: from present state to future systems10.1016/j.rser.2015.07.010 ↗
3. A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects10.1016/j.rser.2015.04.130 ↗
4. A review on thermal management of lithium-ion batteries for electric vehicles10.1016/j.energy.2021.121652 ↗
5. Deep neural network‐driven in‐situ detection and quantification of lithium plating on anodes in commercial lithium‐ion batteries10.1002/eom2.12280 ↗
6. Energy assessment of the ageing phenomenon in Li-Ion batteries and its impact on the vehicle range efficiency10.1016/j.enconman.2022.116530 ↗
7. An energy-efficient battery thermal management system incorporating a porous metal-based multiscale flow manifold10.1016/j.enconman.2022.116147 ↗
8. Review on battery thermal management system for electric vehicles10.1016/j.applthermaleng.2018.12.020 ↗
9. A review of novel thermal management systems for batteries10.1002/er.4095 ↗
10. A novel composite vapor chamber for battery thermal management system10.1016/j.enconman.2022.115293 ↗
11. Assessment method of the integrated thermal management system for electric vehicles with related experimental validation10.1016/j.enconman.2022.116571 ↗
12. The state of the art on preheating lithium-ion batteries in cold weather10.1016/j.est.2019.101059 ↗
13. A rapid self-heating strategy of lithium-ion battery at low temperatures based on bidirectional pulse current without external power10.1016/j.jpowsour.2022.232138 ↗
14. Near-zero-Energy smart battery thermal management enabled by sorption energy harvesting from air10.1021/acscentsci.0c00570 ↗
15. Multi-objective optimization design for a double-direction liquid heating system-based Cell-to-Chassis battery module10.1016/j.ijheatmasstransfer.2021.122184 ↗
16. PTC self-heating experiments and thermal modeling of lithium-ion battery pack in electric vehicles10.3390/en10040572 ↗
17. Analysis of low temperature preheating effect based on battery temperature-rise model10.3390/en10081121 ↗
18. Temperature distribution of lithium ion battery module with inconsistent cells under pulsed heating method10.1016/j.applthermaleng.2022.118529 ↗
19. Capacity degradation minimization oriented optimization for the pulse preheating of lithium-ion batteries under low temperature10.1016/j.est.2020.101746 ↗
20. Advanced thermal management system driven by phase change materials for power lithium-ion batteries: a review10.1016/j.rser.2022.112207 ↗
21. Heating performance characteristics of high-voltage PTC heater for an electric vehicle10.3390/en10101494 ↗
22. An optimal internal-heating strategy for lithium-ion batteries at low temperature considering both heating time and lifetime reduction10.1016/j.apenergy.2019.113797 ↗
23. Experimental study on pulse self–heating of lithium–ion battery at low temperature10.1016/j.ijheatmasstransfer.2019.02.020 ↗
24. Lithium-ion battery structure that self-heats at low temperatures10.1038/nature16502 ↗
25. Computational design and refinement of self-heating lithium ion batteries10.1016/j.jpowsour.2016.08.028 ↗
26. Visualization of self-heating of an all climate battery by infrared thermography10.1016/j.jpowsour.2017.11.052 ↗
27. Sandwich self-heating structure-based lithium-ion battery system and its application in the fuel cell bus for Beijing Winter Olympic Games10.1016/j.enconman.2023.116977 ↗
28. Real-time and hierarchical energy management-control framework for electric vehicles with dual-motor powertrain system10.1016/j.energy.2023.127112 ↗
29. Mechanisms for the evolution of cell variations within a LiNixCoyMnzO2/graphite lithium-ion battery pack caused by temperature non-uniformity10.1016/j.jclepro.2018.09.003 ↗
30. Numerical investigation on optimal design of battery cooling plate for uneven heat generation conditions in electric vehicles10.1016/j.applthermaleng.2022.118476 ↗
31. Temperature uniformity improvement of an air-cooled high-power lithium-ion battery using metal and nonmetal foams10.1115/1.4033811 ↗
32. A novel optimization method based on inverse calculation model for efficient design of battery thermal management system10.1016/j.enconman.2022.115290 ↗
33. Inhomogeneous degradation induced by lithium plating in a large-format lithium-ion battery10.1016/j.jpowsour.2022.231753 ↗
34. Localized lithium plating under mild cycling conditions in high-energy lithium-ion batteries10.1016/j.jpowsour.2023.233118 ↗
35. Plating energy as a universal descriptor to classify accelerated cell failure under operational extremes
36. Modeling the inhomogeneous lithium plating in lithium-ion batteries induced by non-uniform temperature distribution10.1016/j.electacta.2022.140701 ↗
37. Directionality of thermal gradients in lithium-ion batteries dictates diverging degradation modes
38. Temperature uniformity of a heated lithium-ion battery cell in cold climate10.1016/j.applthermaleng.2017.09.100 ↗
39. Variable duty cycle heating strategy based online two-dimensional model for self-heating lithium-ion battery10.1016/j.est.2022.105572 ↗
40. Improving temperature uniformity of a lithium-ion battery by intermittent heating method in cold climate10.1016/j.ijheatmasstransfer.2017.12.159 ↗
41. Balaji · 2021
42. Mathematical model for thermal behavior of lithium-ion battery pack under overheating10.1016/j.applthermaleng.2021.116894 ↗
43. Challenges and opportunities toward fast-charging of lithium-ion batteries10.1016/j.est.2020.101837 ↗
44. Effect of thermal environments on fast charging Li-ion batteries10.1016/j.jpowsour.2021.230466 ↗