Direct wetting of Li7La3Zr2O12 electrolyte with molten Li anode and its application in solid-state lithium batteries
Source abstract
Abstract
Garnet Li 6.5La 3Zr 1.5Ta 0.5O 12 (LLZTO) is a promising solid electrolyte for solid-state batteries (SSBs) owing to its high ionic conductivity and high chemical/electrochemical stability. However, the solid-to-solid interface between LLZTO electrolyte and Li anode restricts its application. In this work, an in-situ integration of LLZTO electrolyte with Li anode is proposed to solve this problem. Superior to reported works, the LLZTO obtained by our self-consolidation method can be directly wetted by molten Li without any surface treatment. The self-consolidated LLZTO exhibits a dense microstructure consisting of grains and interstitial phases among them, both of which are accessible to molten Li. Removal of surface contaminants on molten Li rather than that on LLZTO is a prerequisite for direct wetting. Benefiting from direct wetting, an intimate interfacial contact between the LLZTO and Li anode is achieved and the interfacial resistance is significantly reduced. The Li symmetric cell exerts a stable Li plating/stripping cycle for 1000 h at 0.20 mA cm −2 and the solid-state battery paired with LiCoO 2 cathode exhibits a capacity retention of 90.0 % at 0.2 C after 200 cycles at room temperature. This work highlights the surface chemistry of electrolyte and electrode, which is crucial for designing their integration and application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Are redox-active organic small molecules applicable for high-voltage (>4 V) lithium-ion battery cathodes?
2. Advanced electrolyte design for stable lithium metal anode: from liquid to solid10.1016/j.nanoen.2020.105516 ↗
3. High-energy and durable lithium metal batteries using garnet-type solid electrolytes with tailored lithium-metal compatibility10.1038/s41467-022-29531-x ↗
4. Foldable solid-state batteries enabled by electrolyte mediation in covalent organic frameworks10.1002/adma.202201410 ↗
5. Interrelated interfacial issues between a Li7La3Zr2O12-based garnet electrolyte and Li anode in the solid-state lithium battery: a review10.1039/D0TA08179E ↗
6. Visualizing lthium dendrite formation within solid-state electrolytes10.1021/acsenergylett.0c02314 ↗
7. All-dry synthesis of self-supporting thin Li10GeP2S12 membrane and interface engineering for solid state lithium metal batteries10.1016/j.cej.2021.129965 ↗
8. Origin of high ionic conductivity of Sc‐doped sodium‐rich NASICON solid‐state electrolytes10.1002/adfm.202102129 ↗
9. LISICON-based amorphous oxide for bulk-type all-solid-state lithium-ion battery10.1021/acsaem.9b01949 ↗
10. Thio‐/LISICON and LGPS‐type solid electrolytes for all‐solid‐state lithium‐ion batteries10.1002/adfm.202203551 ↗
11. Lead-free solid-state organic-inorganic halide perovskite electrolyte for lithium-ion conduction10.1021/acsami.2c02078 ↗
12. Mechanochemical synthesis and ion transport properties of Na3OX (X = Cl, Br, I and BH4) antiperovskite solid electrolytes10.1016/j.jpowsour.2020.228489 ↗
13. Al/Ga-doped Li7La3Zr2O12 garnets as Li-ion solid-state battery electrolytes: atomistic insights into local coordination environments and their influence on 17O, 27Al, and 71Ga NMR spectra10.1021/jacs.9b12685 ↗
14. A decade of progress on solid‐state electrolytes for secondary batteries: advances and contributions10.1002/adfm.202100891 ↗
15. Reducing interfacial resistance between garnet-structured solid-state electrolyte and Li-metal anode by a germanium layer10.1002/adma.201606042 ↗
16. Transition from superlithiophobicity to superlithiophilicity of garnet solid-state electrolyte10.1021/jacs.6b06777 ↗
17. Negating interfacial impedance in garnet-based solid-state Li metal batteries10.1038/nmat4821 ↗
18. Drawing a soft interface: an effective interfacial modification strategy for garnet-type solid-state Li batteries10.1021/acsenergylett.8b00453 ↗
19. Surface chemistry mechanism of ultra-low interfacial resistance in the solid-state electrolyte Li7La3Zr2O1210.1021/acs.chemmater.7b03002 ↗
20. Behind the candelabra: a facile flame vapor deposition method for interfacial engineering of garnet electrolyte to enable ultralong cycling solid-state Li-FeF3 conversion batteries10.1021/acsami.0c08203 ↗
21. A flexible electron-blocking interfacial shield for dendrite-free solid lithium metal batteries10.1038/s41467-020-20463-y ↗
22. Li2CO3-affiliative mechanism for air-accessible interface engineering of garnet electrolyte via facile liquid metal painting10.1038/s41467-020-17493-x ↗
23. Building an air stable and lithium deposition regulable garnet interface from moderate-temperature conversion chemistry10.1002/anie.202003177 ↗
24. In-situ formed Li2CO3-free garnet/Li interface by rapid acid treatment for dendrite-free solid-state batteries10.1016/j.nanoen.2019.04.058 ↗
25. In situ formed shields enabling Li2CO3-free solid electrolytes: a new route to uncover the intrinsic lithiophilicity of garnet electrolytes for dendrite-free Li-metal batteries10.1021/acsami.8b18356 ↗
26. Design of a mixed conductive garnet/Li interface for dendrite-free solid lithium metal batteries10.1039/C9EE01903K ↗
27. Self-consolidation mechanism and its application in the preparation of Al-doped cubic Li7La3Zr2O1210.1016/j.matdes.2017.10.067 ↗
28. Effect of Nb and Ta simultaneous substitution on self-consolidation sintering of Li7La3Zr2O1210.1021/acsaem.2c01018 ↗
29. Improving the Li-ion conductivity and air stability of cubic Li7La3Zr2O12 by the co-doping of Nb, Y on the Zr site10.1016/j.jeurceramsoc.2017.12.002 ↗
30. Grain boundary modification to suppress lithium penetration through garnet-type solid electrolyte10.1016/j.jpowsour.2017.07.088 ↗
31. Li7La3Zr2O12 interface modification for Li dendrite prevention10.1021/acsami.6b00831 ↗
32. Garnet-like Li7-xLa3Zr2-xNbxO12 (x=0−0.7) solid state electrolytes enhanced by self-consolidation strategy10.1016/j.jeurceramsoc.2018.08.037 ↗
33. Pressureless sintering of Al-free Ta-doped lithium garnets Li7-xLa3Zr2-xTaxO12 and the degradation mechanism in humid air10.1016/j.ceramint.2019.07.085 ↗
34. The origin of high electrolyte-electrode interfacial resistances in lithium cells containing garnet type solid electrolytes10.1039/C4CP02921F ↗
35. Interrelationships among grain size, surface composition, air stability, and interfacial resistance of Al-substituted Li7La3Zr2O12 solid electrolytes10.1021/acsami.5b02528 ↗
36. H2O and CO2 surface contamination of the lithium garnet Li7La3Zr2O12 solid electrolyte10.1039/D1TA10228A ↗
37. Lithium-metal foil surface modification: an effective method to improve the cycling performance of lithium-metal batteries
38. A prostate specific antigen immunosensor based on biotinylated‐antibody/cyclodextrin inclusion complex: fabrication and electrochemical studies10.1002/elan.201700363 ↗
39. Impedimetric paper-based enzymatic biosensor using electrospun cellulose acetate nanofiber and reduced graphene oxide for detection of glucose from whole blood10.1109/JSEN.2021.3053033 ↗
40. Mechanism of lithium metal penetration through inorganic solid electrolytes
41. Garnet Li7La3Zr2O12-based solid-state lithium batteries achieved by in situ thermally polymerized gel polymer electrolyte10.1021/acsami.2c09028 ↗
42. A propylene carbonate based gel polymer electrolyte for extended cycle life and improved safety performance of lithium ion batteries10.1016/j.jpowsour.2018.07.039 ↗