journal article·2024-02

Bi2Se3@SWCNT heterostructures with beyond theoretical capacity as perspective binder-free anodes for lithium-ion batteries

Vitalijs Lazarenko, Raimonds Meija, Yelyzaveta Rublova, Artis Kons, Vanda Voikiva, Jana Andzane, Rynno Lohmus, Anatolijs Sarakovskis, Xiangze Kong, Tanja Kallio, Arturs Viksna, Donats Erts

Publisher page

Abstract

Bi 2Se 3 has shown potential for implementation as an anode material for lithium-ion batteries (LIBs), however, the significant volume expansion and dissolution of selenium pose major challenges. In this work, Bi 2Se 3 nanostructures are synthesized by physical vapor deposition directly on top of a single-wall carbon nanotube (SWCNT) network to fabricate a binder-free Bi 2Se 3@SWCNT anode materials with different Bi 2Se 3/SWCNT ratios. Nanostructuring the Bi 2Se 3 directly on the top of the SWCNT network provides a large accessible contact area and improves mechanical and electrical contact. The heterostructures exhibit capacity, that is beyond the theoretical of pristine Bi 2Se 3 , which can be attributed to the binding of the Se to C, resulting in the resilience against the dissolution of Se, while providing additional electron transport pathways and increased capacitive contribution. A Bi 2Se 3@SWCNT anode with a mass ratio of (1:1) has the highest capacity in a half-cell after 100 cycles (523 mAh g −1 at 0.1 A g −1) and shows excellent capacity retention after 500 cycles at large current densities (2 A g −1 and 5 A g −1): 1080 mAh g −1 and 809 mAh g −1 respectively. In addition, in a full-cell system Bi 2Se 3@SWCNT (1:1) delivers high reversible capacity after 150 cycles (484 mAh g −1) at 0.4 A g −1.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. 25th anniversary article: understanding the lithiation of silicon and other alloying anodes for lithium-ion batteries10.1002/adma.201301795 ↗
2. Ion diffusivity through the solid electrolyte interphase in lithium-ion batteries10.1149/2.0181711jes ↗
3. Critical review and functional safety of a battery management system for large-scale lithium-ion battery pack technologies10.1007/s40789-022-00494-0 ↗
4. Recycling lithium-ion batteries from electric vehicles10.1038/s41586-019-1682-5 ↗
5. Strategies for high energy density dual‐ion batteries using carbon‐based cathodes10.1002/aesr.202100074 ↗
6. Applications of lithium-ion batteries in grid-scale energy storage systems10.1007/s12209-020-00236-w ↗
7. Polymer electrode materials for lithium-ion batteries10.1002/adfm.202110871 ↗
8. Batteries in PV systems10.1016/B978-0-12-385934-1.00022-2 ↗
9. High‐voltage zinc‐ion batteries: design strategies and challenges10.1002/adfm.202010213 ↗
10. Influence of the fluoroethylene carbonate on the electrochemical behavior of Bi3Ge4O12 as Lithium-ion anode10.1016/j.jcis.2022.05.126 ↗
11. The success story of graphite as a lithium-ion anode material-fundamentals, remaining challenges, and recent developments including silicon (oxide) composites10.1039/D0SE00175A ↗
12. New metastable phase of bismuth (III) selenide: crystal structure and electrical properties
13. Bismuth chalcogenide compounds Bi2×3 (X=O, S, Se): applications in electrochemical energy storage10.1016/j.nanoen.2017.02.041 ↗
14. Interstitial defects in the van der Waals gap of Bi 2 Se 310.1107/S2052520619008357 ↗
15. Lithium ions in the van der Waals gap of Bi2Se3 single crystals10.1016/j.jssc.2010.09.026 ↗
16. Perspective anodes for aqueous rechargeable lithium-ion batteries10.3390/batteries8100144 ↗
17. Flexible Bismuth Selenide/Graphene composite paper for lithium-ion batteries10.1016/j.ceramint.2016.10.110 ↗
18. Implementation of bismuth chalcogenides as an efficient anode: a journey from conventional liquid electrolyte to an all-solid-state Li-ion battery10.3390/molecules25163733 ↗
19. Emergence of graphene as a promising anode material for rechargeable batteries: a review10.1016/j.mtchem.2018.11.006 ↗
20. Effect of carbon nanotubes on the anode performance of natural graphite for lithium ion batteries10.1016/j.jpcs.2009.12.010 ↗
21. Electrospun Ni-added SnO 2-carbon nanofiber composite anode for high-performance lithium-ion batteries10.1021/am301328u ↗
22. A nanostructured SnO2/Ni/CNT composite as an anode for Li ion batteries10.1039/D1RA01678D ↗
23. R. Jin, M. Sun, G. Li,CNTs@C@Bi2Se3 composite as an improved-performance anode for lithium ion batteries, Ceram. Int. https://doi.org/10.1016/j.ceramint.2017.09.124..
24. Vapor selenization produced Bi2Se3nanoparticles in carbon fiber 3D network as binder-free anode for flexible lithium-ion batteries10.1039/D0QM00884B ↗
25. Crystalline ropes of metallic carbon nanotubes10.1126/science.273.5274.483 ↗
26. Density measurement of size selected multiwalled carbon nanotubes by mobility-mass characterization10.1016/j.carbon.2009.01.011 ↗
27. A review of application of carbon nanotubes for lithium ion battery anode material10.1016/j.jpowsour.2012.02.013 ↗
28. Applications of carbon nanotubes for lithium ion battery anodes10.3390/ma6031138 ↗
29. E. Thauer, A. Ottmann, P. Schneider, L. Möller, L. Deeg, R. Zeus, F. Wilhelmi, L. Schlestein, C. Neef, R. Ghunaim, M. Gellesch, C. Nowka, M. Scholz, M. Haft, S. Wurmehl, K. Wenelska, E. Mijowska, A. Kapoor, A. Bajpai, S. Hampel, R.https://doi.org/10.3390/molecules25051064..
30. Modification of Single-Walled Carbon Nanotube Networks Anodes for Application in Aqueous Lithium-Ion Batteries10.3390/batteries9050260 ↗
31. Carbon nanotube for targeted drug delivery
32. Correlation between dispersion state and electrical conductivity of MWCNTs/PP composites prepared by melt blending10.1016/j.compositesa.2009.11.009 ↗
33. Effect of graphene substrate type on formation of Bi2Se3 nanoplates10.1038/s41598-019-41178-1 ↗
34. Growth mechanisms and related thermoelectric properties of innovative hybrid networks fabricated by direct deposition of Bi2Se3 and Sb2Te3 on multiwalled carbon nanotubes
35. Flexible layer-structured Bi2Te3 thermoelectric on a carbon nanotube scaffold10.1038/s41563-018-0217-z ↗
36. Catalyst-free vapour–solid technique for deposition of Bi 2 Te 3 and Bi 2 Se 3 nanowires/nanobelts with topological insulator properties10.1039/C5NR04574F ↗
37. Thickness-dependent properties of ultrathin bismuth and antimony chalcogenide films formed by physical vapor deposition and their application in thermoelectric generators
38. The electrochemical characterization of nanostructured Bi2Se3 thin films in an aqueous Na electrolyte10.3390/batteries8030025 ↗
39. High performance broadband photodetector using fabricated nanowires of bismuth selenide
40. Patterning Bi 2 Se 3 single-crystalline thin films on Si(111) substrates using strong oxidizing acids10.1039/C7RA05317G ↗
41. In-doped Bi2Se3 hierarchical nanostructures as anode materials for Li-ion batteries10.1039/c4ta00045e ↗
42. Facile synthesis of Bi 2 S 3 @SiO 2 core-shell microwires as high-performance anode materials for lithium-ion batteries10.1149/2.0151701jes ↗
43. Branch-structured Bi2S3-CNT hybrids with improved lithium storage capability10.1039/C4TA02717E ↗
44. One-pot facile fabrication of carbon-coated Bi2S3 nanomeshes with efficient Li-storage capability10.1007/s12274-014-0437-8 ↗
45. Bi 2 S 3/C nanorods as efficient anode materials for lithium-ion batteries10.1039/C8DT04158J ↗
46. Chrysanthemum-like Bi2S3 nanostructures: a promising anode material for lithium-ion batteries and sodium-ion batteries10.1016/j.jallcom.2017.05.008 ↗
47. Lemongrass-like Bi2S3 as a high-performance anode material for lithium-ion batteries10.1007/s11581-019-02932-7 ↗
48. Self-assembled three-dimensional hierarchical NiO nano/microspheres as high-performance anode material for lithium ion batteries10.1016/j.apsusc.2014.12.170 ↗
49. Stable lithium anode enabled by biphasic hybrid SEI layer toward high-performance lithium metal batteries10.1016/j.cej.2021.133570 ↗
50. Design and synthesis of electrode materials with both battery-type and capacitive charge storage10.1016/j.ensm.2019.07.023 ↗
51. Bi2S3 for aqueous Zn ion battery with enhanced cycle stability10.1007/s40820-019-0352-3 ↗
52. Flexible conductive anodes based on 3D hierarchical Sn/NS-CNFs@rGO network for sodium-ion batteries10.1007/s40820-019-0294-9 ↗
53. Applications of voltammetry in lithium ion battery research10.33961/jecst.2019.00619 ↗
54. Rational construction of heterostructured core-shell Bi2S3@Co9S8 complex hollow particles toward high-performance Li- and Na-ion storage10.1016/j.ensm.2020.04.004 ↗
55. Interfacial engineering enables Bi2S3@N-doped carbon nanospheres towards high performance anode for lithium-ion batteries10.1016/j.electacta.2021.139340 ↗
56. Investigations on the electrochemical decomposition of the electrolyte additive vinylene carbonate in Li metal half cells and lithium ion full cells10.1016/j.jpowsour.2016.09.100 ↗
57. Flexible one-dimensional carbon–selenium composite nanofibers with superior electrochemical performance for Li–Se/Na–Se batteries10.1016/j.jpowsour.2015.02.029 ↗
58. γ-Fe 2 O 3 @CNTs anode materials for lithium ion batteries investigated by electron energy loss spectroscopy10.1021/acs.chemmater.6b05356 ↗
59. Carbon nanotube flexible and stretchable electronics10.1186/s11671-015-1013-1 ↗
60. Positive and negative changes in the electrical conductance related to hybrid filler distribution gradient in composite flexible thermoelectric films subjected to bending10.3390/nano13071212 ↗
61. Thermal abuse behavior of the LIR2450 micro coin cell battery having capacity of 120 mAh with internal short circuit by penetrating element10.3390/sym12020246 ↗
62. Expanding the Peukert equation for battery capacity modeling through inclusion of a temperature dependency10.1016/j.jpowsour.2013.01.174 ↗
63. Influence of current density on graphite anode failure in lithium-ion batteries10.1149/2.0701903jes ↗
64. Potential and limitations of research battery cell types for electrochemical data acquisition
65. Advanced matrixes for binder‐free nanostructured electrodes in lithium‐ion batteries
66. Hierarchical Bi2Se3 microrods: microwave-assisted synthesis, growth mechanism and their related properties10.1039/c2ce26678d ↗
67. Bismuth metal–organic frameworks derived bismuth selenide nanosheets/nitrogen–doped carbon hybrids as anodes for Li–ion batteries with improved cyclic performance10.1016/j.ceramint.2019.03.068 ↗
68. Lifetime vs. rate capability: understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes10.1016/j.ensm.2016.08.002 ↗
69. Influence of the electrolyte quantity on lithium-ion cells10.1149/2.0121910jes ↗