Enhanced water retention in carbon nanotube sheets-sandwiched gas diffusion layer in polymer electrolyte membrane fuel cells operated under low humidity conditions
Source abstract
Abstract
This study introduces the polymer electrolyte membrane fuel cell (PEMFC) using sandwiched-carbon nanotube (CNT) sheets into the gas diffusion layer (GDL). The CNT sheegts are synthesized via floating catalyst chemical vapor deposition and formed into sheets using the direct spinning technique. The sandwiched-CNT sheets PEMFC indicates high electrochemical performance across a range of relative humidity conditions, remarkably in non-humidified conditions of the cathode. This notable achievement can be attributed to the distinctive physical properties of the CNT sheets. In contrast to the microporous layers, the CNT sheets possess a nanoporous structure that enhances reactant diffusion, and appropriate hydrophobicity enhances the water retention capacity in GDL. These properties are confirmed by polarization curves, electrochemical impedance spectroscopy (EIS), quantitative capillary pressure, and water removal rate test in constant current mode at 0.4 A/cm 2 . In the non-humidified cathode condition, the peak power density of the sandwiched-CNT sheets PEMFC is 45% higher than conventional PEMFC. Moreover, it demonstrates significantly reduced ohmic resistance in EIS. The water retention capability of the PEMFC is assessed through quantitative capillary pressure and water removal rate test. Based on these assessments, we validate that the sandwiched-CNT sheets PEMFC exhibits high performance even under non-humidified cathode conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Effects of pin shapes on gas-liquid transport behaviors in PEMFC cathode10.1016/j.jpowsour.2022.232584 ↗
2. Progress and perspectives of integrated thermal management systems in PEM fuel cell vehicles: a review10.1016/j.rser.2021.111908 ↗
3. Performance evaluation on thermodynamics-economy-environment of PEMFC vehicle power system under dynamic condition10.1016/j.enconman.2022.116082 ↗
4. Performance prediction and power density maximization of a proton exchange membrane fuel cell based on deep belief network10.1016/j.jpowsour.2020.228154 ↗
5. Performance analysis and dynamic characteristics of a proton exchange membrane fuel cell with dual recirculation pumps for air-free applications10.1016/j.jpowsour.2023.232926 ↗
6. Chemical looping induced CH3OH–H2-PEMFC scheme for fuel cell vehicle: parameter optimization and feasibility analysis10.1016/j.jpowsour.2020.228790 ↗
7. Artificial intelligence-based multi-objective optimisation for proton exchange membrane fuel cell: a literature review10.1016/j.jpowsour.2021.230808 ↗
8. Numerical and experimental investigation of baffle plate arrangement on proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228034 ↗
9. Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228361 ↗
10. Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers10.1016/j.jpowsour.2006.09.045 ↗
11. A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding10.1016/j.jpowsour.2003.11.081 ↗
12. V. Mehta, J.S. Cooper, Review and Analysis of PEM Fuel Cell Design and Manufacturing, n.d..
13. Control of the air supply subsystem in a PEMFC with balance of plant simulation
14. Experimental study on the self-humidification effect in proton exchange membrane fuel cells containing double gas diffusion backing layer10.1016/j.apenergy.2015.02.027 ↗
15. Collective enhancement in hydrophobicity and electrical conductivity of gas diffusion layer and the electrochemical performance of PEMFCs10.1016/j.jpowsour.2023.233077 ↗
16. Highly flat and highly homogeneous carbon paper with ultra-thin thickness for high-performance proton exchange membrane fuel cell (PEMFC)10.1016/j.jpowsour.2021.230832 ↗
17. A numerical study of the polarization effect of liquid water in the gas diffusion layer of a proton exchange membrane fuel cell10.1016/j.jpowsour.2022.231221 ↗
18. Gas diffusion layer degradation in proton exchange membrane fuel cells: mechanisms, characterization techniques and modelling approaches10.1016/j.jpowsour.2021.230560 ↗
19. Utilization of 3D printed carbon gas diffusion layers in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2022.05.134 ↗
20. Microwave-assisted hydrothermal synthesis of three-dimensional NbOPO4-reduced graphene oxide-carbon nanotube composite for high performance sodium-ion battery anode10.1016/j.jpowsour.2022.231457 ↗
21. Enhanced proton conductivity and stability of polybenzimidazole membranes at low phosphoric acid doping levels via constructing efficient proton transport pathways with ionic liquids and carbon nanotubes10.1016/j.jpowsour.2022.231802 ↗
22. Flexible supercapacitors based on free-standing polyaniline/single-walled carbon nanotube films10.1016/j.jpowsour.2022.231691 ↗
23. A comparative study of high density Vertically Aligned Carbon Nanotubes grown onto different grades of aluminum – application to supercapacitors10.1016/j.jpowsour.2022.232258 ↗
24. Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2015.02.115 ↗
25. Single-walled carbon nanotube interlayer modified gas diffusion layers to boost the cell performance of self-humidifying proton exchange membrane fuel cells
26. High-performance polymer electrolyte membrane fuel cells with nanoporous carbon nanotube layer in low humidity condition10.1016/j.jpowsour.2022.231416 ↗
27. Floating catalyst reactor design and safety features for carbon nanotube synthesis
28. A review on carbon nanotube: an overview of synthesis, properties, functionalization, characterization, and the application10.1016/j.mseb.2021.115095 ↗
29. Carbon nanotube fibers and films: synthesis, applications and perspectives of the direct-spinning method10.1039/C6NR07549E ↗
30. Cathodic nanoporous CNT functional interlayer as a performance and durability boosting agent for proton exchange membrane fuel cells to operable at 120 °C10.1016/j.carbon.2022.07.074 ↗
31. In situ metal ion contamination and the effects on proton exchange membrane fuel cell performance10.1016/j.jpowsour.2011.01.086 ↗
32. Mechanisms of membrane degradation
33. Carbon nanotubes grown in situ on carbon paper as a microporous layer for proton exchange membrane fuel cells10.1016/j.ijhydene.2015.04.129 ↗
34. Influence of oxygen-containing functional groups on the environmental properties, transformations, and toxicity of carbon nanotubes10.1021/acs.chemrev.0c00351 ↗
35. Thermal stability and reducibility of oxygen-containing functional groups on multiwalled carbon nanotube surfaces: a quantitative high-resolution xps and TPD/TPR study10.1021/jp804413a ↗
36. Characterization of MWCNT and SWCNT functionalized by acid treatments and the effect of functionalized carbon nanotubes on electrical properties of PMMA-MWCNT and PMMA-SWCNT nanocomposites10.1007/s13204-023-02838-x ↗
37. A microfluidic approach for measuring capillary pressure in PEMFC gas diffusion layers10.1016/j.elecom.2007.06.042 ↗
38. One simple method to improve the mass transfer of membrane electrode assembly to realize operation under wide humidity10.1016/j.jpowsour.2021.230185 ↗