A patching reinforcement strategy for hybrid surfactants as electrolyte additives with excellent performance in aluminum-air batteries
Source abstract
Abstract
Surfactants attract attentions in aluminum-air batteries (AABs) due to its profound effects for anti-corrosion. This research proposes a patching reinforcement strategy using surfactants of dodecyl-β-D-maltoside (βD) and dodecyldimethyl benzyl ammonium bromide (DDBAB) to enhance the action of 8-hydroxyquinoline (8-HQ) as electrolyte additive. Hybrid surfactants consolidate the complexation of 8-HQ with aluminum, forming a dense protective film on the electrode surface. The results show that the assembled AABs has the highest capacity density of 2517 mAh·g −1 under optimizing condition, and the anode utilization rate reaches 84.5%. The corrosion protection efficiency can reach 87.2% on Al-5052 electrode in 4 M NaOH solution. This strategy provides a new method for using hybrid additives for AABs and aims to promote their commercial application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. An all-solid-state fiber-shaped aluminum–air battery with flexibility, stretchability, and high electrochemical performance10.1002/anie.201601804 ↗
2. Inhibitive effect of quaternary ammonium-type surfactants on the self-corrosion of the anode in alkaline aluminium-air battery10.1016/j.jpowsour.2019.226723 ↗
3. Synergistic construction of bifunctional interface film on anode via a novel hybrid additive for enhanced alkaline Al-air battery performance10.1016/j.cej.2022.138175 ↗
4. Improving the performance of primary aluminum-air batteries through suppressing water activity by hydrogen bond-rich glycerol solvent additive10.1016/j.ensm.2022.12.012 ↗
5. Graphene-loaded and Mn-doped SrCoO3 perovskite oxide as a cathode catalyst for aluminum–air battery10.1016/j.jmrt.2023.04.073 ↗
6. Solvation structures in aqueous metal-ion batteries10.1002/aenm.202202068 ↗
7. The aluminum chemistry and corrosion in alkaline solutions10.1016/j.jnucmat.2008.11.009 ↗
8. Degradability of aluminum in acidic and alkaline solutions10.1016/j.corsci.2013.10.019 ↗
9. Challenges and strategies of low-cost aluminum anodes for high-performance Al-based batteries10.1002/adma.202102026 ↗
10. Regulating solvation and interface chemistry enables advanced aluminum-air batteries10.1039/D2CC06674B ↗
11. An all-solid-state fiber-shaped aluminum-air battery with flexibility, stretchability, and high electrochemical performance10.1002/anie.201601804 ↗
12. Chapter 5 - corrosion inhibitors used in alkaline environments
13. Advanced technologies for high-energy aluminum–air batteries10.1002/adma.201804784 ↗
14. The effects of surface treatment and stannate as an electrolyte additive on the corrosion and electrochemical performances of pure aluminum in an alkaline methanol–water solution10.1016/j.matchemphys.2010.02.006 ↗
15. Aluminum-air batteries: a review of alloys, electrolytes and design10.1016/j.jpowsour.2021.229762 ↗
16. Recent developments for aluminum–air batteries10.1007/s41918-020-00065-4 ↗
17. A review of the Al-gas batteries and perspectives for a “Real” Al-air battery10.1016/j.jpowsour.2023.233375 ↗
18. S.M.A. Nayem, S. Islam, M. Mohamed, S. Shaheen Shah, A.J.S. Ahammad, M.A. Aziz, A Mechanistic Overview of the Current Status and Future Challenges of Aluminum Anode and Electrolyte in Aluminum-Air Batteries, The Chemical Record n/a(n/a) e202300005. https://doi.org/10.1002/tcr.202300005..
19. The use and behavior of aluminum anodes in alkaline primary batteries10.1149/1.2425257 ↗
20. Synergistic effect of 8-aminoquinoline and ZnO as hybrid additives in alkaline electrolyte for Al-air battery10.1016/j.molliq.2020.114946 ↗
21. Evaluation of an alkaline electrolyte system for Al-air battery10.1149/2.0031512eel ↗
22. Synergistic corrosion inhibition effect of molybdate and phosphate ions for anodic oxidation film formed on 2024 aluminum alloy10.1007/s11595-019-2069-z ↗
23. Synergistic regulating the aluminum corrosion by ellagic acid and sodium stannate hybrid additives for advanced aluminum-air battery10.1016/j.electacta.2022.140311 ↗
24. Synergistic effect between glutamic acid and rare earth cerium (III) as corrosion inhibitors on AA5052 aluminum alloy in neutral chloride medium10.1007/s11581-018-2605-4 ↗
25. Effect of nonionic surfactant as an electrolyte additive on the performance of aluminum-air battery10.1016/j.jpowsour.2018.11.086 ↗
26. Improvement of electrochemical performance with amphoteric surfactants for Al anode of Al-air battery in alkaline system10.1016/j.jpowsour.2021.230646 ↗
27. Inhibition by tetradecylpyridinium bromide of the corrosion of aluminium in hydrochloric acid solution10.1016/j.corsci.2011.01.032 ↗
28. Effect of agar as electrolyte additive on the aluminum-air batteries10.1149/1945-7111/ab9cc7 ↗
29. Modified alkaline electrolyte with 8-hydroxyquinoline and ZnO complex additives to improve Al-air battery10.1016/j.jpowsour.2019.05.077 ↗
30. High efficiency corrosion inhibitor 8-hydroxyquinoline and its synergistic effect with sodium dodecylbenzenesulphonate on AZ91D magnesium alloy10.1016/j.corsci.2010.01.033 ↗
31. High effective organic corrosion inhibitors for 2024 aluminium alloy10.1016/j.electacta.2007.05.058 ↗
32. The sandwich-like structures of polydopamine and 8-hydroxyquinoline coated graphene oxide for excellent corrosion resistance of epoxy coatings10.1016/j.jcis.2020.01.051 ↗
33. Novel amide-based cationic surfactants as efficient corrosion inhibitors for carbon steel in HCl and H2SO4 media10.1007/s11743-012-1356-x ↗
34. Inhibitive effect of quaternary ammonium-type surfactants on the self-corrosion of the anode in alkaline aluminium-air battery10.1016/j.jpowsour.2019.226723 ↗
35. Monitoring corrosion and corrosion control of iron in HCl by non-ionic surfactants of the TRITON-X series - Part III. Immersion time effects and theoretical studies10.1016/j.corsci.2011.02.007 ↗
36. In situ inhibitor synthesis from admixture of benzaldehyde and benzene-1,2-diamine along with FeCl3 catalyst as a new corrosion inhibitor for mild steel in 0.5M sulphuric acid10.1016/j.corsci.2013.01.019 ↗
37. Evaluation of corrosion resistant, antimicrobial and cytocompatible behaviour of cobalt based metallosurfactants self-assembled monolayers on 316L stainless steel surface10.1016/j.surfcoat.2022.128657 ↗
38. Effect of cetyl trimethyl ammonium bromide as an electrolyte additive on secondary discharge performance of aluminum-air battery10.1007/s11581-023-04934-y ↗
39. The effect of a nonionic surfactant/ZnO hybrid inhibitor on the self-corrosion of Al alloy in alkaline electrolyte and its application to Al-air batteries10.1002/celc.202300017 ↗
40. Anode interfacial layer construction via hybrid inhibitors for high-performance Al-air batteries10.1021/acsami.1c14829 ↗
41. Synergistic effect of vanadate and nanoclay hybrid inhibitor on the self-corrosion and discharge activity of Al anode in alkaline aluminum-air batteries10.1149/1945-7111/acc35f ↗
42. Corrosion inhibition of hybrid H(2)QS/CaO additives for AA5052 alloy in alkaline solution10.1002/jctb.7171 ↗
43. Understanding the synergistic effect of alkyl polyglucoside and potassium stannate as advanced hybrid corrosion inhibitor for alkaline aluminum-air battery10.1016/j.cej.2019.123162 ↗
44. The effect of a nonionic surfactant/ZnO hybrid inhibitor on the self-corrosion of Al alloy in alkaline electrolyte and its application to Al-air batteries10.1002/celc.202300017 ↗
45. Inhibiting anodic parasitic reaction for high-performance Al-air batteries via a multi-functional hybrid additive10.1016/j.jpowsour.2023.233294 ↗
46. Excellent performance of aluminium anode based on dithiothreitol additives for alkaline aluminium/air batteries10.1016/j.jpowsour.2020.227785 ↗
47. Synergistic effects of carboxymethyl cellulose and ZnO as alkaline electrolyte additives for aluminium anodes with a view towards Al-air batteries10.1016/j.jpowsour.2016.09.060 ↗
48. Influence of an imidazole-based ionic liquid as electrolyte additive on the performance of alkaline Al-air battery10.1016/j.jpowsour.2023.232901 ↗
49. Anode interfacial layer construction via hybrid inhibitors for high-performance Al–air batteries10.1021/acsami.1c14829 ↗
50. Experimental and theoretical investigation on corrosion inhibition of AA5052 aluminium alloy by l-cysteine in alkaline solution10.1016/j.matchemphys.2015.11.041 ↗
51. Novel package for inhibition of aluminium corrosion in alkaline solutions10.1016/j.matchemphys.2010.07.059 ↗
52. Solvothermal synthesis of functionalized carbon dots from amino acid as an eco-friendly corrosion inhibitor for copper in sulfuric acid solution10.1016/j.jcis.2021.07.034 ↗
53. Evaluation of alloy anodes for aluminum‐air batteries: III . Mechanisms of activation, passivation, and hydrogen evolution10.1149/1.2095347 ↗
54. Electrochemical behaviour of aluminium in concentrated NaOH solutions10.1016/S0010-938X(98)00107-3 ↗
55. A novel approach for copper protection: UV light triggered preparation of the click-assembled film on copper surface10.1016/j.cej.2019.123406 ↗
56. Evaluation of AA5052 alloy anode in alkaline electrolyte with organic rare-earth complex additives for aluminium-air batteries10.1016/j.jpowsour.2015.05.104 ↗
57. Synergistic effect of potassium iodide and sodium dodecyl sulfonate on the corrosion inhibition of carbon steel in HCl medium: a combined experimental and theoretical investigation10.1039/D0RA02011G ↗
58. Excellent performance of dodecyl dimethyl betaine and calcium gluconate as hybrid corrosion inhibitors for Al alloy in alkaline solution10.1016/j.corsci.2022.110556 ↗
59. Modification on water electrochemical environment for durable Al-Air Battery: achieved by a Low-Cost sucrose additive10.1016/j.cej.2022.135538 ↗
60. Near solution-level conductivity of polyvinyl alcohol based electrolyte and the application for fully compliant Al-air battery10.1016/j.cej.2021.134283 ↗
61. Inhibition effect and mechanism of inorganic-organic hybrid additives on three-dimension porous aluminum foam in alkaline Al-air battery10.1016/j.jpowsour.2019.227460 ↗
62. Excellent performance of 8-hydroxyquinoline and alkyl polyglycolides hybrid electrolyte additives on aluminum-air battery10.1016/j.cej.2023.145139 ↗
63. High energy efficiency of Al-based anodes for Al-air battery by simultaneous addition of Mn and Sb10.1016/j.cej.2020.128006 ↗
64. Performance of AA5052 alloy anode in alkaline ethylene glycol electrolyte with dicarboxylic acids additives for aluminium-air batteries10.1016/j.jpowsour.2015.08.033 ↗
65. Investigation of the electrochemical behaviour of AA1050 aluminium alloy in aqueous alkaline solutions using Dynamic Electrochemical Impedance Spectroscopy10.1016/j.jelechem.2016.08.028 ↗
66. Evaluation of inhibitive action of some quaternary N-heterocyclic compounds on the corrosion of Al–Cu alloy in hydrochloric acid10.1016/j.matchemphys.2008.09.065 ↗
67. Stability of trianionic curcumin enhanced by gemini alkyl O-Glucosides and alkyl trimethyl ammonium halides mixed micelles10.1016/j.colsurfa.2016.05.076 ↗
68. Spectroscopy of concentrated sodium aluminate solutions10.1366/0003702981943310 ↗
69. Preparation and purification of 8-hydroxyquinoline metal complexes
70. Effect of quinoline-8-sulfonic acid and CaO as hybrid electrolyte additives on microstructure and property of AA5052 alloy anode for aluminum-air battery10.1016/j.jtice.2021.11.017 ↗
71. Quantum chemical approach of corrosion inhibition10.1016/S0013-4686(03)00307-4 ↗
72. Electrochemical and DFT studies of quinoline derivatives on corrosion inhibition of AA5052 aluminium alloy in NaCl solution10.1016/j.apsusc.2015.09.206 ↗
73. Experimental and theoretical investigation on calcium oxide and L-aspartic as an effective hybrid inhibitor for aluminum-air batteries10.1016/j.jallcom.2018.09.391 ↗
74. Molecular dynamics simulation of inhibition mechanism of 3,5-dibromo salicylaldehyde Schiff's base10.1016/j.comptc.2015.04.003 ↗