journal article·2023-10

Interaction of cell flow directions and performance in PEM fuel cell systems following an anode based water management approach

Mirjam Grimm, Mark Hellmann, Helerson Kemmer, Stephan Kabelac

Publisher page

Abstract

A good water management is very important for the operation of PEM fuel cell systems as the proton conductivity is dependent on the membrane water content. In contrast to state of the art approaches, this study focuses on an anode based water management approach of fuel cell systems with an anode recirculation loop. The aim of the anode based water management is to reach a high and homogeneously distributed anode humidity without condensation in all relevant operating conditions. A criterion is defined to evaluate the anode humidity distribution. A macroscopic discrete 2D+1D model was developed that can simulate humidity distributions and the cell voltage for various flow directions of the fluids and operating conditions. The model considers the system behavior including the anode recirculation loop. This study shows that flow directions that support an internal water circulation are beneficial for fuel cell systems without external humidification. Furthermore, the study shows a correlation between the anode humidity distribution at the membrane and the cell voltage. The higher the temperature is, the more important is a flow field that supports a high and homogeneously distributed anode humidity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society10.1149/2.F03152if ↗
2. Powertrain system of Honda FCX Clarity fuel cell vehicle10.3390/wevj3040820 ↗
3. A review of polymer electrolyte membrane fuel cells: technology, applications and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
4. Overview of the next quarter century vision of hydrogen fuel cell electric vehicles10.1016/j.ijhydene.2018.10.112 ↗
5. Forecast of performance parameters of automotive fuel cell systems – delphi study results10.1002/fuce.201400035 ↗
6. Control-oriented model of a membrane humidifier for fuel cell applications10.1016/j.enconman.2017.01.036 ↗
7. Investigation of MEA degradation in PEM fuel cell by on/off cyclic operation under different humid conditions10.1016/j.ijhydene.2010.02.053 ↗
8. Study of relative humidity on durability of the reversal tolerant proton exchange membrane fuel cell anode using a segmented cell10.1016/j.jpowsour.2019.227542 ↗
9. Larminie · 2013 · vol. 58 · 75
10. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells10.1016/S0376-7388(00)00632-3 ↗
11. Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells10.1016/S0378-7753(00)00662-5 ↗
12. A water and heat management model for proton-exchange-membrane fuel cells10.1149/1.2220792 ↗
13. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
14. On the distribution of local current density along a PEM fuel cell cathode channel10.1016/j.elecom.2019.02.005 ↗
15. Investigation of current density spatial distribution in PEM fuel cells using a comprehensively validated multi-phase non-isothermal model10.1016/j.ijheatmasstransfer.2019.119294 ↗
16. Computational fluid dynamics modeling of proton exchange membrane fuel cells10.1149/1.1394090 ↗
17. Anode partial flooding modelling of proton exchange membrane fuel cells Optimisation of electrode properties and channel geometries10.1016/j.ces.2016.02.029 ↗
18. Numerical study of the effect of relative humidity and stoichiometric flow ratio on PEM (proton exchange membrane) fuel cell performance with various channel lengths: an anode partial flooding modelling10.1016/j.energy.2016.03.105 ↗
19. Anode partial flooding modelling of proton exchange membrane fuel cells: model development and validation10.1016/j.energy.2015.12.048 ↗
20. The effect of relative humidity of the cathode on the performance and the uniformity of PEM fuel cells10.1016/j.ijhydene.2011.06.136 ↗
21. Multi-objective optimization of operating conditions and channel structure for a proton exchange membrane fuel cell10.1016/j.ijheatmasstransfer.2017.03.120 ↗
22. Experimental study of variable operating parameters effects on overall PEMFC performance and spatial performance distribution10.1016/j.energy.2016.08.086 ↗
23. Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes10.1016/j.jpowsour.2006.03.077 ↗
24. Measurements of humidity and current distribution in a PEFC10.1016/j.jpowsour.2005.04.032 ↗
25. Study of internal multi-parameter distributions of proton exchange membrane fuel cell with segmented cell device and coupled three-dimensional model10.1016/j.renene.2019.09.026 ↗
26. Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell10.1016/j.energy.2010.02.044 ↗
27. Measurement of current distribution in a proton exchange membrane fuel cell with various flow arrangements – a parametric study10.1016/j.apenergy.2011.05.033 ↗
28. In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells10.1016/j.jpowsour.2018.12.008 ↗
29. Innovative cathode flow-field design for passive air-cooled polymer electrolyte membrane (PEM) fuel cell stacks10.1016/j.ijhydene.2019.07.128 ↗
30. Three-dimensional multi-phase simulation of PEM fuel cell considering the full morphology of metal foam flow field10.1016/j.ijhydene.2020.05.263 ↗
31. The effects of flow-field orientation on water management in PEM fuel cells with serpentine channels10.1016/j.apenergy.2017.09.044 ↗
32. Comparative analysis of two-phase flow in sinusoidal channel of different geometric configurations with application to PEMFC10.1016/j.ijhydene.2019.03.213 ↗
33. Effect of flow pattern of gas and cooling water on relative humidity distribution in polymer electrolyte fuel cell10.1016/j.jpowsour.2006.07.018 ↗
34. Optimization of reactants relative humidity for high performance of polymer electrolyte membrane fuel cells with co-flow and counter-flow configurations
35. Experimental and modelling studies of low temperature PEMFC performance10.1016/j.ijhydene.2020.01.019 ↗
36. 3D CFD modeling of a PEM fuel cell stack10.1016/j.ijhydene.2016.10.065 ↗
37. Numerical analysis of operating conditions effects on PEMFC with anode recirculation10.1016/j.energy.2019.02.115 ↗
38. A quasi-2D transient model of proton exchange membrane fuel cell with anode recirculation10.1016/j.enconman.2018.06.091 ↗
39. Hasegawa · 2016
40. Distributed parameter model-based control of water activity and concentration of reactants in a polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2017.08.191 ↗
41. 2-D + 1-D PEM fuel cell model for fuel cell system simulations10.1016/j.ijhydene.2021.08.044 ↗
42. Hybrid dynamic modeling-based membrane hydration analysis for the commercial high-power integrated PEMFC systems considering water transport equivalent10.1016/j.enconman.2019.112385 ↗
43. Water management of PEM fuel cell systems based on the humidity distribution in the anode gas channels10.1002/fuce.202000070 ↗
44. Borup · 2019
45. Enhancement of mass transfer in a proton exchange membrane fuel cell with blockage in the flow channel10.1016/j.applthermaleng.2018.12.138 ↗
46. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
47. Analytical calculation of electrolyte water content of a Proton Exchange Membrane Fuel Cell for on-board modelling applications10.1016/j.jpowsour.2018.04.005 ↗
48. Measurement of water transport properties through membrane-electrode assemblies10.1149/1.2737384 ↗
49. Determination of catalyst unique parameters for the oxygen reduction reaction in a PEMFC10.1149/1.2266294 ↗
50. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
51. Burger · 2018
52. Hellmann · 2014
53. Computational fluid dynamics modeling of proton exchange membrane fuel cells10.1149/1.1394090 ↗
54. The effect of humidity on the degradation of Nafion® membrane10.1016/j.polymdegradstab.2009.05.016 ↗
55. Vielstich · 2009 · 345