Low-frequency experimental method for measuring the electric double-layer capacitances of multi-cell electrolysis stacks based on equivalent circuit model
Source abstract
Abstract
In recent years, the green hydrogen production via water electrolysis has acquired significant attention, and the dynamic operation of electrolysis stacks has become a crucial research area. The electric double-layer capacitance (EDLC) is the primary factor indicating the performance of the stack and affecting the dynamic behavior of the electrolysis stack. High-frequency testing methods are commonly used to measure the EDLCs of electrolysis cells in laboratory, but these methods are not suitable for cost-efficiency and a bottleneck of the engineering power electronic devices. This study proposes a novel square-wave pulse current (SPC) method for determining the EDLCs of multi-cell electrolysis stacks using industrial rectifiers. The response of the stack subjected to SPC is analyzed based on a semi-empirical equivalent circuit (SEEC) model. The feasibility of the proposed method is verified through experiments on a 2 Nm 3 /h alkaline water electrolysis stack, and an accuracy of 2.67% is obtained.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hybrid Renewable Energy Systems · Advanced Battery Technologies Research · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. IEA · 2022
2. Design principle and loss engineering for photovoltaic–electrolysis cell system10.1021/acsomega.7b00012 ↗
3. Dynamic system modeling of thermally-integrated concentrated PV-electrolysis10.1016/j.ijhydene.2020.12.151 ↗
4. Experimental assessment of a residential scale renewable–regenerative energy system10.1016/j.jpowsour.2008.09.098 ↗
5. Alkaline water electrolysis powered by renewable energy: A review10.3390/pr8020248 ↗
6. A comparison of hydrogen storage technologies for solar-powered stand-alone power supplies: A photovoltaic system sizing approach10.1016/j.ijhydene.2006.09.013 ↗
7. Integration of hydrogen energy technologies in stand-alone power systems analysis of the current potential for applications10.1016/j.rser.2004.10.001 ↗
8. Ulleberg · 1998
9. Model predictive control of an integrated energy microgrid combining power to heat and hydrogen
10. Optimal operation of an integrated energy system incorporated with HCNG distribution networks10.1109/TSTE.2019.2951701 ↗
11. Electrolyzer modeling and real-time control for optimized production of hydrogen gas10.1016/j.apenergy.2020.116031 ↗
12. Advances in alkaline water electrolyzers: A review10.1016/j.est.2019.03.001 ↗
13. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review10.1016/j.rser.2017.09.003 ↗
14. A new accelerated durability test protocol for water oxidation electrocatalysts of renewable energy powered alkaline water electrolyzers10.5796/electrochemistry.20-00156 ↗
15. Cathodic protection system against a reverse-current after shut-down in zero-gap alkaline water electrolysis10.1021/jacsau.2c00314 ↗
16. Effects of operation and shutdown parameters and electrode materials on the reverse current phenomenon in alkaline water analyzers
17. Dependence of the reverse current on the surface of electrode placed on a bipolar plate in an alkaline water electrolyzer10.5796/electrochemistry.17-00102 ↗
18. Relationship between the redox reactions on a bipolar plate and reverse current after alkaline water electrolysis10.1007/s12678-017-0423-5 ↗
19. Structure and transformation of oxy-hydroxide films on Ni anodes below and above the oxygen evolution potential in alkaline electrolytes10.1016/j.electacta.2015.04.020 ↗
20. Directly sputtered nickel electrodes for alkaline water electrolysis10.1016/j.electacta.2021.138458 ↗
21. A powder metallurgy route to produce raney-nickel electrodes for alkaline water electrolysis10.1149/2.0851904jes ↗
22. Evaluation of Raney nickel electrodes prepared by atmospheric plasma spraying for alkaline water electrolysers10.1016/j.ijhydene.2013.09.012 ↗
23. Life expectancy and degradation behavior of electric double layer capacitor part I
24. The electrical double layer and the theory of electrocapillarity10.1021/cr60130a002 ↗
25. Wind-powered 250 kW electrolyzer for dynamic hydrogen production: A pilot study10.1016/j.ijhydene.2021.08.029 ↗
26. Influence of rectifiers on the energy demand and gas quality of alkaline electrolysis systems in dynamic operation10.1016/j.apenergy.2019.05.014 ↗
27. Modeling and control design of hydrogen production process for an active hydrogen/wind hybrid power system10.1016/j.ijhydene.2008.10.030 ↗
28. Characterisation of a PEM electrolyser using the current interrupt method10.1016/j.ijhydene.2014.09.153 ↗
29. Bard · 2022
30. Diagnostic tools in PEM fuel cell research: Part I Electrochemical techniques10.1016/j.ijhydene.2008.01.013 ↗
31. Static–dynamic modelling of the electrical behaviour of a commercial advanced alkaline water electrolyser10.1016/j.ijhydene.2012.09.125 ↗
32. Lutz · 2011
33. Dynamic emulation of a PEM electrolyzer by time constant based exponential model10.3390/en12040750 ↗
34. Development of an adaptive static-dynamic electrical model based on input electrical energy for PEM water electrolysis10.1016/j.ijhydene.2020.04.182 ↗
35. A comprehensive survey of alkaline electrolyzer modeling: electrical domain and specific electrolyte conductivity10.3390/en15093452 ↗
36. Advanced water electrolysis and catalyst stability under discontinuous operation10.1016/0360-3199(90)90032-T ↗
37. Rashid · 2017
38. Modeling of advanced alkaline electrolyzers: a system simulation approach10.1016/S0360-3199(02)00033-2 ↗
39. Simulation tool based on a physics model and an electrical analogy for an alkaline electrolyser10.1016/j.jpowsour.2013.10.086 ↗
40. Modelling and experimental validation of a 46 kW PEM high pressure water electrolyzer10.1016/j.renene.2017.11.081 ↗
41. Semi-empirical model and experimental validation for the performance evaluation of a 15 kW alkaline water electrolyzer10.1016/j.ijhydene.2018.09.029 ↗
42. Numerical modeling and analysis of the temperature effect on the performance of an alkaline water electrolysis system10.1016/j.jpowsour.2021.230106 ↗
43. New multi-physics approach for modelling and design of alkaline electrolyzers10.1016/j.ijhydene.2012.07.015 ↗
44. Transient electrolyser response in a renewable-regenerative energy system10.1016/j.ijhydene.2008.10.007 ↗
45. Predicting shunt currents in stacks of bipolar plate cells10.1149/1.2108606 ↗
46. Predicting shunt currents in stacks of bipolar plate cells with conducting manifolds10.1149/1.2096069 ↗
47. Barbir · 2012
48. Experimental study and modeling of impedance of the her on porous Ni electrodes10.1016/S0022-0728(00)00317-X ↗
49. Influence of process conditions on gas purity in alkaline water electrolysis10.1016/j.ijhydene.2016.12.111 ↗
50. The modified nodal approach to network analysis10.1109/TCS.1975.1084079 ↗
51. Hildebrand · 1987
52. Ohmic resistance in zero gap alkaline electrolysis with a Zirfon diaphragm10.1016/j.electacta.2020.137684 ↗