Analysis of solvent-free lithium-ion electrodes formed under high pressure and heat
Source abstract
Abstract
Dry electrode manufacturing holds promise for reducing the time and energy required to produce lithium-ion cells. However, this method which uses no solvents has required slow and specialized processes such as dry spraying and electrostatic spraying, which has prevented adoption of the technology in commercial applications. To explore an alternative way to produce dry electrodes, a heated press was used to adhere the LiFePO 4 active material onto the current collector. It was found that at high temperature and pressure, a dry Lithium Iron Phosphate (LFP) electrode could retain 91% state of health after 250 cycles compared to a standard wet LFP electrode, which retained 93% state of health. It should be possible to use this method in a high throughput, heated calendaring roller setup to efficiently produce dry electrodes for Li-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Prospects for reducing the processing cost of lithium ion batteries10.1016/j.jpowsour.2014.11.019 ↗
2. Energy impact of cathode drying and solvent recovery during lithium- ion battery manufacturing10.1016/j.jpowsour.2016.04.102 ↗
3. Simulation of micro/nanopowder mixing characteristics for dry spray additive manufacturing of Li-ion battery electrodes10.1115/1.4037769 ↗
4. Understanding interfacial-energy-driven dry powder mixing for solvent-free additive manufacturing of Li-ion battery electrodes10.1002/admi.201700570 ↗
5. Novel solvent-free direct coating process for battery electrodes and their electrochemical performance10.1016/j.jpowsour.2015.12.066 ↗
6. Strengthening the electrodes for Li-ion batteries with a porous adhesive interlayer through dry-spraying manufacturing10.1021/acsami.9b03020 ↗
7. Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries10.1016/j.jpowsour.2017.03.131 ↗
8. Scalable dry printing manufacturing to enable long-life and high energy lithium-ion batteries10.1002/admt.201700106 ↗
9. Solvay
10. First atomic-scale insight into degradation in lithium Iron phosphate cathodes by transmission electron microscopy10.1021/acs.jpclett.0c00317 ↗
11. Solvent-free manufacturing of electrodes for lithium-ion batteries
12. D. P. Glover, "Petrpophysics MSc course notes," in Petrpophysics, Leeds, University of Aberdeen UK.
13. Supplies
14. Flexicon
15. Cathode porosity is a missing key parameter to optimize lithium-sulfur battery energy density10.1038/s41467-019-12542-6 ↗
16. Effect of electrode porosity on the performance of natural Brazilian graphite electrodes10.1016/0378-7753(95)02268-6 ↗
17. Micro-four-line probe to measure electronic conductivity and contact resistance of thin-film battery electrodes10.1149/2.0581510jes ↗
18. A generalized SOC-OCV model for lithium-ion batteries and the SOC estimation for LNMCO battery10.3390/en9110900 ↗
19. Y. Liu, H. Wu, Y. Wang, K. Li, S. Yin and J. R. Dahn, "Impact of shell composition, thickness and heating temperature on the performance of nickel-rich cobalt-free core-shell materials," J. Electrochem. Soc., vol. 167, 2020.10.1149/1945-7111/abd571 ↗
20. Wagner · 2003
21. Structural and electronic properties of low dielectric constant fluorinated amorphous carbon films10.1063/1.121601 ↗