journal article·2022-09

Optimal cell architecture for reversible solid oxide cells featuring rare-earth nickelate oxygen electrodes

Ayesha Akter, Hector Grande, Uday Pal, Soumendra Basu, Srikanth Gopalan

Publisher page

Abstract

Improved performance in reversible electrochemical cells can be achieved by incorporating novel high-performance materials, or by optimizing electrode architectures employing known materials. In this work, we optimize the electrode architecture of a reversible solid oxide cell by tuning the oxygen electrode active layer (AL) and current collecting layer (CCL) thicknesses in reversible solid oxide cells that employ Nd 2NiO 4+δ and Nd 0.5Ce 0 · 5O 2-δ (NNO-NDC50) composite electrodes. A detailed electrochemical performance analysis by impedance spectroscopy revealed that proper architectural design can significantly reduce the ohmic and polarization resistance. An optimum thickness of 27 μm for AL and 23 μm for CCL was found to result in an area-specific polarization resistance of 0.032 Ωcm 2 in NNO|NNO-NDC50|GDC10|YSZ symmetrical half-cells. Single full cells with the optimized architecture Ni-YSZ|YSZ|GDC10|NNO-NDC50|NNO showed significant performance improvements in both fuel cell and electrolysis modes compared to state-of-the-art cells. A high power density of 1.54 Wcm −2 in the fuel cell mode was achieved with 97%H 2–3%H 2 O fuel and air at 800 °C. The cell also achieved high current densities of 1.31272 Acm −2 and -1.25649 Acm −2 at 0.7 V and 1.2V respectively under 50% H 2–50% H 2 O fuel and air at 800 °C, demonstrating its suitability for reversible power generation and electrolysis applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Modeling and experimental performance of an intermediate temperature reversible solid oxide cell for high-efficiency, distributed-scale electrical energy storage10.1016/j.jpowsour.2015.02.113 ↗
2. Recent advances in high temperature electrolysis using solid oxide fuel cells: a review10.1016/j.jpowsour.2011.12.019 ↗
3. Cyclic polarization enhances the operating stability of La0. 57Sr0. 38Co0. 18Fe0. 72Nb0. 1O3-δ oxygen electrode of reversible solid oxide cells10.1016/j.jpowsour.2018.10.009 ↗
4. Influence of configuration and microstructure on performance of La2NiO4+ δ intermediate-temperature solid oxide fuel cells cathodes10.1016/j.jpowsour.2013.03.192 ↗
5. The effect of porous composite electrode structure on solid oxide fuel cell performance: I. theoretical analysis10.1149/1.1837360 ↗
6. Influence of electrode thickness on the performance of composite electrodes for SOFC10.1007/s10800-008-9500-z ↗
7. Optimization on the electrochemical properties of La2NiO4+ δ cathodes by tuning the cathode thickness10.1016/j.ijhydene.2018.01.024 ↗
8. Geometrical optimization of double layer LSM/LSM-YSZ cathodes by electrochemical impedance spectroscopy10.1115/1.3117606 ↗
9. Polarization properties of La0. 6Sr0. 4Co0. 2Fe0. 8O3-based double layer-type oxygen electrodes for reversible SOFCs10.1016/j.electacta.2008.12.048 ↗
10. Methods to increase electrochemical activity of lanthanum nickelate-ferrite electrodes for intermediate and low temperature SOFCs10.1016/j.ijhydene.2021.01.226 ↗
11. Structure, transport properties and electrochemical behavior of the layered lanthanide nickelates doped with calcium10.1016/j.ijhydene.2018.07.115 ↗
12. impedance. py: a Python package for electrochemical impedance analysis10.21105/joss.02349 ↗
13. Quantitative analysis of microstructure and its related electrical property of SOFC anode, Ni–YSZ cermet10.1016/S0167-2738(02)00050-4 ↗
14. Cathode optimization for an inert-substrate-supported tubular solid oxide fuel cell10.3389/fenrg.2018.00087 ↗
15. Overstoichiometric oxides Ln2NiO4+ δ (Ln= La, Pr or Nd) as oxygen anodic electrodes for solid oxide electrolysis application10.1016/j.ijhydene.2015.09.107 ↗
16. Novel La2NiO4+ δ and La4Ni3O10− δ composites for solid oxide fuel cell cathodes10.1016/j.jpowsour.2013.06.106 ↗
17. Enhanced performances of structured oxygen electrodes for high temperature steam electrolysis10.1002/fuce.201200201 ↗
18. CPE analysis by local electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.128 ↗
19. Relationship between the origin of constant-phase element behavior in electrochemical impedance spectroscopy and electrode surface structure10.1021/jp512063f ↗
20. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
21. Impedance of rough capacitive electrodes10.1016/0022-0728(93)02949-I ↗
22. Impedance of a disk electrode with reactions involving an adsorbed intermediate: experimental and simulation analysis10.1149/1.3123193 ↗
23. On the origin of capacitance dispersion of rough electrodes10.1016/S0013-4686(00)00574-0 ↗
24. Impedance spectroscopy at interfaces of metals and aqueous solutions—surface roughness, CPE and related issues10.1016/j.ssi.2004.06.023 ↗
25. Thickness‐dependent high‐performance solid oxide fuel cells with Ba0. 5Sr0. 5Co0. 8Fe0. 2O3‐δ cathode10.1002/apj.2769 ↗
26. Impedance spectroscopy study of Nd2NiO4+ δ, LSM and platinum electrodes by micro-contact technique10.1016/j.jeurceramsoc.2007.02.029 ↗
27. Oxygen transport kinetics of mixed ionic-electronic conductors by coupling focused ion beam tomography and electrochemical impedance spectroscopy10.1149/2.0851704jes ↗
28. High performance of microtubular solid oxide fuel cells using Nd 2 NiO 4+ δ-based composite cathodes10.1039/C4TA00665H ↗
29. Novel K2NiF4‐type materials for solid oxide fuel cells: compatibility with electrolytes in the intermediate temperature range10.1002/fuce.200800023 ↗
30. Rare earth Nickelate electrodes containing heavily doped ceria for reversible solid oxide fuel cells10.1016/j.jpowsour.2021.230248 ↗
31. Improved stability of reversible solid oxide cells with a nickelate-based oxygen electrode10.1039/C5TA08531D ↗
32. A new anode material for solid oxide electrolyser: the neodymium nickelate Nd2NiO4+ δ10.1016/j.jpowsour.2009.08.003 ↗
33. High performance of intermediate temperature solid oxide electrolysis cells using Nd2NiO4+ δ impregnated scandia stabilized zirconia oxygen electrode10.1016/j.jpowsour.2014.11.042 ↗
34. Cobalt substituted Pr2Ni1-xCoxO4+ δ (x= 0, 0.1, 0.2) oxygen electrodes: impact on electrochemical performance and durability of solid oxide electrolysis cells10.1016/j.jpowsour.2020.228909 ↗
35. An efficient and prospective self-assembled hybrid electrocatalyst for symmetrical and reversible solid oxide cells10.1016/j.electacta.2020.137171 ↗
36. Evaluation of SrCo0. 8Nb0. 2O3-δ, SrCo0. 8Ta0. 2O3-δ and SrCo0. 8Nb0. 1Ta0. 1O3-δ as air electrode materials for solid oxide electrolysis and reversible solid oxide cells10.1016/j.electacta.2019.134654 ↗
37. A highly active and stable hybrid oxygen electrode for reversible solid oxide cells10.1016/j.ijhydene.2021.08.150 ↗
38. Large-area solid oxide cells with La0. 6Sr0. 4CoO3-δ infiltrated oxygen electrodes for electricity generation and hydrogen production10.1016/j.jpowsour.2020.227742 ↗