journal article·2022-07

Regulating the cationic rearrangement of Ni-rich layered oxide cathode for high-performance Li-ion batteries

Selvamani Vadivel, Krisara Srimanon, Montree Sawangphruk

Publisher page

Abstract

Enormous effort has been paid to improve Ni-rich cathode`s performance by suppressing surface residues and enhancing microscopic surface ordering (high Ni 3+/Ni 2+ ). Herein, strong alkali-mediated chemical oxidation of commercial precursor is employed to directly synthesize Ni-rich NCA cathode sintering under an oxygen atmosphere. Because of the limited lithium source, the lithium residue over the polycrystalline material is controlled; of course, a certain fraction of lithium has been lost and substituted by Ni 2+, even pre-oxidized the precursor. XPS studies suggest that the percentage of oxidized nickel (Ni 3+) is comparably higher at the surface than core (∼100 nm in depth) and retained during the lithiation. The synthesized material initially shows a high reversible lithiation efficiency of 90.6% at 0.05 C. The capacity degradation in the life-cycle study at 0.2 C could be endorsed to the combination of lithium inventory and active metal loss along with typical kinetic limitations, as diagnosed from the derivative dQ/dV plot. The high initial coulombic efficiency and discharge capacity with low polarization further confirm superior surface ordering and low surface residue. This study demonstrates that the pretreatment of the precursor is one of the effective strategies to regulate the cationic arrangement to achieve improved electrochemical performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Recent progress and perspective of advanced high‐energy Co‐less Ni‐rich cathodes for Li‐ion batteries: yesterday, today, and tomorrow
2. Cation ordering of Zr-doped LiNiO 2 cathode for lithium-ion batteries10.1021/acs.chemmater.8b00619 ↗
3. Influence of Ni/Mn distributions on the structure and electrochemical properties of Ni-rich cathode materials10.1039/C8DT03552K ↗
4. NCA, NCM811, and the route to Ni-richer lithium-ion batteries10.3390/en13236363 ↗
5. Electrode–electrolyte interface in Li-ion batteries: current understanding and new insights10.1021/acs.jpclett.5b01727 ↗
6. Effect of ambient storage on the degradation of Ni-rich positive electrode materials (NMC811) for Li-ion batteries10.1149/2.0401802jes ↗
7. Li2CO3 decomposition in Li-ion batteries induced by the electrochemical oxidation of the electrolyte and of electrolyte impurities10.1016/j.electacta.2020.136271 ↗
8. A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries10.1016/j.ensm.2016.10.007 ↗
9. The effect of cation mixing controlled by thermal treatment duration on the electrochemical stability of lithium transition-metal oxides10.1039/C7CP05530G ↗
10. Factors affecting cycling life of LiNi 0.8 Co 0.15 Al 0.05 O 2 for lithium-ion batteries10.1039/C6TA01251E ↗
11. High-performance Li-ion batteries using nickel-rich lithium nickel cobalt aluminium oxide–nanocarbon core–shell cathode: in operando X-ray diffraction10.1021/acsami.9b06553 ↗
12. Prelithiated perfluoro-ionomer as an alternative binder for the state-of-the-art Ni-rich LiNi0.8Co0.15Al0.05O2cathode of next-generation lithium-ion batteries10.1039/D0TA04999A ↗
13. Ambient storage derived surface contamination of NCM811 and NCM111: performance implications and mitigation strategies10.1149/2.0011912jes ↗
14. Low-temperature synthesis of lithium nickelate positive active material from nickel hydroxide for lithium cells10.1016/S0378-7753(00)00453-5 ↗
15. Pretreated precursor to realize dual modification that improves the high voltage electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode materials10.1016/j.jallcom.2020.158325 ↗
16. Synthesis of spherical LiNi0.8Co0.15Al0.05O2 cathode materials for lithium-ion batteries by a co-oxidation-controlled crystallization method10.1016/j.cclet.2011.01.041 ↗
17. Surface surgery of the nickel-rich cathode material LiNi 0.815 Co 0.15 Al 0.035 O 2 : toward a complete and ordered surface layered structure and better electrochemical properties10.1021/acsami.6b11431 ↗
18. Implications of cation-disordered grain boundaries on the electrochemical performance of the LiNi0.5Co0.2Mn0.3O2 cathode material for lithium ion batteries10.1039/C8TA04731F ↗
19. Spectroscopic and electrokinetic evidence for a bifunctional mechanism of the oxygen evolution reaction10.1002/anie.202011388 ↗
20. Elucidation of Li x Ni 0.8 Co 0.15 Al 0.05 O 2 redox chemistry by operando Raman spectroscopy10.1021/acs.chemmater.8b01384 ↗
21. In situ Raman microscopy of individual LiNi 0.8Co 0.15Al 0.05O 2 particles in a Li-ion battery composite cathode10.1021/jp046027c ↗
22. Editors' choice—growth of ambient induced surface impurity species on layered positive electrode materials and impact on electrochemical performance10.1149/2.0921714jes ↗
23. Re-heating effect of Ni-rich cathode material on structure and electrochemical properties10.1016/j.jpowsour.2016.02.015 ↗
24. X-ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems10.1002/sia.3026 ↗
25. Enhancing cycle stability and storage property of LiNi 0.8 Co 0.15 Al 0.05 O 2 by using fast cooling method10.1016/j.electacta.2016.12.138 ↗
26. Rock Salt−Spinel structural transformation in anodically electrodeposited Mn−Co−O nanocrystals10.1021/cm703464p ↗
27. Combination effect of bulk structure change and surface rearrangement on the electrochemical kinetics of LiNi 0.80 Co 0.15 Al 0.05 O 2 during initial charging processes10.1021/acsami.8b15131 ↗
28. Extending the battery life using an Al-doped Li[Ni 0.76 Co 0.09 Mn 0.15 ]O 2 cathode with concentration gradients for lithium ion batteries10.1021/acsenergylett.7b00613 ↗
29. Extending the battery life using an Al-doped Li[Ni 0.76 Co 0.09 Mn 0.15 ]O 2 cathode with concentration gradients for lithium ion batteries10.1021/acsenergylett.7b00613 ↗
30. The nature of irreversible phase transformation propagation in nickel-rich layered cathode for lithium-ion batteries10.1016/j.jechem.2021.03.035 ↗
31. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
32. The nature of irreversible phase transformation propagation in nickel-rich layered cathode for lithium-ion batteries10.1016/j.jechem.2021.03.035 ↗
33. A universal method for enhancing the structural stability of Ni-rich cathodes via the synergistic effect of dual-element cosubstitution10.1021/acsami.1c05486 ↗
34. Kinetics tuning of Li-ion diffusion in layered Li(Ni x Mn y Co z)O 210.1021/jacs.5b04040 ↗
35. Intrinsic kinetic limitations in substituted lithium-layered transition-metal oxide electrodes10.1021/jacs.9b13551 ↗
36. Ni/Li disordering in layered transition metal oxide: electrochemical impact, origin, and control10.1021/acs.accounts.9b00033 ↗