Strategies for approaching one hundred percent dense lithium-ion battery cathodes
Source abstract
Abstract
Increasing the density and thickness of battery electrodes can lower costs, ease manufacturing, and increase energy density; however, existing electrode architectures cannot simultaneously enable thick and dense electrodes with good power densities. In particle-based architectures, long range lithium-ion transport primarily occurs through the electrolyte, but electrolyte transport pathways disappear as electrode density approaches 100%. The loss of these transport pathways leads to dramatic capacity reductions at moderate discharge rates and has set minimum porosity limits for commercial cells. This work examines transport through three thick and dense cathode architectures to understand the interdependent impact of inter-particle interfaces, continuous diffusion lengths , solid volume fraction, solid diffusivity, cathode thickness, and discharge rate on areal capacity. We demonstrate the advantages of continuous cathode architectures and show how the combination of high diffusivity and continuous solid diffusion pathways can yield 65% increases in areal capacity over a conventional, particle-based electrode at 85% solids volume fraction. We also show that combining these high-diffusivity, continuous cathode architectures with solid electrolytes can overcome some of the inherent limitations of current solid-state battery designs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Prospects for reducing the processing cost of lithium ion batteries10.1016/j.jpowsour.2014.11.019 ↗
2. Factors determining the packing-limitation of active materials in the composite electrode of lithium-ion batteries10.1016/j.jpowsour.2015.09.105 ↗
3. Manufacturing process for improved ultra-thick cathodes in high-energy lithium-ion batteries10.1002/ente.201900167 ↗
4. Enabling aqueous processing for crack-free thick electrodes10.1016/j.jpowsour.2017.04.030 ↗
5. Electrode architecture design to promote charge-transport kinetics in high-loading and high-energy lithium-based batteries10.1002/smtd.202100518 ↗
6. 3D lithium ion batteries—from fundamentals to fabrication10.1039/c0jm04396f ↗
7. Effect of porosity on the thick electrodes for high energy density lithium ion batteries for stationary applications10.3390/batteries2040035 ↗
8. Influence of electrode density on the performance of Li-ion batteries: experimental and simulation results10.3390/en9020104 ↗
9. Ultra-thick Li-ion battery electrodes using different cell size of metal foam current collectors10.1039/C4RA14485F ↗
10. Sintered electrode full cells for high energy density lithium-ion batteries10.1007/s10800-018-1242-y ↗
11. Ultrahigh-Capacity and Scalable Architected Battery Electrodes via Tortuosity Modulation10.1021/acsnano.1c06491 ↗
12. A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes10.1016/j.electacta.2012.03.161 ↗
13. Thick electrodes for high energy lithium ion batteries10.1149/2.0401507jes ↗
14. Understanding thickness and porosity effects on the electrochemical performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2-based cathodes for high energy Li-ion batteries
15. A guide to Li-ion coin-cell electrode making for academic researchers10.1149/1.3515072 ↗
16. From fundamental understanding to engineering design of high-performance thick electrodes for scalable energy-storage systems10.1002/adma.202101275 ↗
17. Tunable porous electrode architectures for enhanced Li-ion storage kinetics in thick electrodes10.1021/acs.nanolett.1c02142 ↗
18. Concurrently approaching volumetric and specific capacity limits of lithium battery cathodes via conformal pickering emulsion graphene coatings
19. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes10.1149/2.0321602jes ↗
20. Laue · 2019
21. Advances in materials design for all-solid-state batteries: from bulk to thin films10.3390/app10144727 ↗
22. Solid state thin-film lithium battery systems10.1016/S1359-0286(99)00052-2 ↗
23. Recent progress on interface formation in all-solid-state batteries10.1016/j.coelec.2017.10.008 ↗
24. Review on solid electrolytes for all-solid-state lithium-ion batteries10.1016/j.jpowsour.2018.04.022 ↗
25. Bulk-type all-solid-state batteries with mechanically prepared LiCoPO4 composite cathodes10.1007/s10008-019-04218-4 ↗
26. Understanding interface stability in solid-state batteries10.1038/s41578-019-0157-5 ↗
27. Revealing the role of the cathode–electrolyte interface on solid-state batteries
28. All ceramic cathode composite design and manufacturing towards low interfacial resistance for garnet-based solid-state lithium batteries
29. A solid-state battery cathode with a polymer composite electrolyte and low tortuosity microstructure by directional freezing and polymerization
30. Dense all‐electrochem‐active electrodes for all‐solid‐state lithium batteries
31. Multiscale understanding and architecture design of high energy/power lithium-ion battery electrodes
32. Challenges and opportunities for fast charging of solid-state lithium metal batteries10.1021/acsenergylett.1c01352 ↗
33. Electroplating lithium transition metal oxides10.1126/sciadv.1602427 ↗
34. Johnson · 2020 · 1
35. A nearly packaging-free design paradigm for light, powerful, and energy-dense primary microbatteries
36. The use of mathematical modeling in the design of lithium/polymer battery systems10.1016/0013-4686(95)00162-8 ↗
37. Doyle · 1997
38. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
39. Simulation and optimization of the dual lithium ion insertion cell
40. Lee · 2002
41. Kinetics of Li-ion transfer reaction at LiMn 2 O 4 , LiCoO 2 , and LiFePO 4 cathodes10.1007/s10008-016-3499-6 ↗
42. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
43. An electrochemical investigation into the lithium insertion properties of LixCoO210.1016/0013-4686(96)00036-9 ↗
44. Electrochemical characterization and temperature dependency of mass-transport properties of LiPF 6 in EC:DEC10.1149/2.0641503jes ↗
45. Conveying advanced Li-ion battery materials into practice the impact of electrode slurry preparation skills10.1002/aenm.201600655 ↗
46. Analysis of rate-limiting factors in thick electrodes for electric vehicle applications10.1149/2.0571803jes ↗
47. Micro-macroscopic coupled modeling of batteries and fuel cells
48. Microstructural modeling and design of rechargeable lithium-ion batteries
49. Modeling the performance of rechargeable lithium-based cells: design correlations for limiting cases10.1016/0378-7753(94)02038-5 ↗
50. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles10.1016/j.jpowsour.2006.03.050 ↗
51. García · 2007
52. Secondary-phase stochastics in lithium-ion battery electrodes10.1021/acsami.7b17771 ↗
53. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
54. Influence of diffusion plane orientation on electrochemical properties of thin film LiCoO[sub 2] electrodes10.1149/1.1471543 ↗
55. Lattice orientation control of lithium cobalt oxide cathode film for all-solid-state thin film batteries10.1016/j.jpowsour.2012.10.094 ↗
56. Orientation dependence of Li–ion diffusion kinetics in LiCoO2 thin films prepared by RF magnetron sputtering10.1016/j.ssi.2008.02.051 ↗
57. Fallahzadeh · 2015
58. Li-ion diffusion in highly (0 0 3) oriented LiCoO 2 thin film cathode prepared by pulsed laser deposition10.1016/j.jallcom.2005.12.131 ↗
59. Preferred orientation of polycrystalline LiCoO[sub 2] films10.1149/1.1393157 ↗