Impact of cathodic biofouling on the uneven performance of individual units and scale-up power efficiency in parallel-connected air-cathode microbial fuel cells
Source abstract
Abstract
Membrane-less air-cathode microbial fuel cell (MFC), as one of the low-cost and potentially scalable modules in the bioelectrochemical technology, can treat wastewater and produce electricity without additional membrane and aeration cost. Nevertheless, the formation of biofilm (i.e., biofouling) on cathodes is observed to deteriorate the cathode performance. This study constructs an eight-unit membrane-less air-cathode MFC and aims to evaluate effects of cathodic biofouling on the performance of individual unit and the scale-up power efficiency during parallel connection. Results indicate cathodic biofoulings affect the cathodic performance by deteriorating both voltage and current output, further causing the performance variation among different cathodes. Moreover, the decrease of power densities by increasing the number of parallel-connected units is observed. Cyclic voltammetry demonstrates the onset potential decreases from 0.4 V to 0.1 V after cathodic biofouling. Electrochemical impedance spectroscopy reveals the polarization resistance of the biofouling cathode increases around two folds. In addition, we also find correlation between cathodic performance and microbial community and association between cathodic performance and unit position in the eight-unit MFC. Overall, our results suggest cathodic biofouling can be the key factor to limit the performance of parallel connection and warrant the need for further research to improve scale-up power efficiency.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. A decentralized wastewater treatment system using microbial fuel cell techniques and its response to a copper shock load10.1016/j.biortech.2013.05.038 ↗
2. Power densities using different cathode catalysts (Pt and CoTMPP) and polymer binders (Nafion and PTFE) in single chamber microbial fuel cells10.1021/es0512071 ↗
3. Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane10.1021/es0499344 ↗
4. Scalable microbial fuel cell (MFC) stack for continuous real wastewater treatment10.1016/j.biortech.2011.11.019 ↗
5. Performance of low cost scalable air–cathode microbial fuel cell made from clayware separator using multiple electrodes10.1016/j.biortech.2015.01.115 ↗
6. Evaluating a multi-panel air cathode through electrochemical and biotic tests10.1016/j.watres.2018.10.022 ↗
7. Fouling of proton exchange membrane (PEM) deteriorates the performance of microbial fuel cell10.1016/j.watres.2011.12.060 ↗
8. Bifunctional quaternary ammonium compounds to inhibit biofilm growth and enhance performance for activated carbon air-cathode in microbial fuel cells10.1016/j.jpowsour.2014.09.008 ↗
9. In situ investigation of cathode and local biofilm microenvironments reveals important roles of OH − and oxygen transport in microbial fuel cells10.1021/es400045s ↗
10. Silver/iron oxide/graphitic carbon composites as bacteriostatic catalysts for enhancing oxygen reduction in microbial fuel cells10.1016/j.jpowsour.2015.02.100 ↗
11. Influence of soluble microbial products on the long-term stability of air cathodes in microbial fuel cells10.1016/j.electacta.2017.12.154 ↗
12. Development of microbial community within the cathodic biofilm of single-chamber air-cathode microbial fuel cell10.1016/j.scitotenv.2019.02.175 ↗
13. Regeneration of the power performance of cathodes affected by biofouling10.1016/j.apenergy.2016.04.009 ↗
14. Removable air-cathode to overcome cathode biofouling in microbial fuel cells10.1016/j.biortech.2016.09.095 ↗
15. Impact of cleaning procedures on restoring cathode performance for microbial fuel cells treating domestic wastewater10.1016/j.biortech.2019.121759 ↗
16. Enhanced catalytic activity and inhibited biofouling of cathode in microbial fuel cells through controlling hydrophilic property10.1016/j.jpowsour.2016.09.114 ↗
17. Inhibition of microbial growth on air cathodes of single chamber microbial fuel cells by incorporating enrofloxacin into the catalyst layer10.1016/j.bios.2015.04.082 ↗
18. Microbial fuel cells based on carbon veil electrodes: stack configuration and scalability10.1002/er.1419 ↗
19. Increasing power recovery and organic removal efficiency using extended longitudinal tubular microbial fuel cell (MFC) reactors10.1039/C0EE00073F ↗
20. Nitrogen removal from wastewater using membrane aerated microbial fuel cell techniques10.1016/j.watres.2010.11.002 ↗
21. Application of pyrolysed iron(II) phthalocyanine and CoTMPP based oxygen reduction catalysts as cathode materials in microbial fuel cells10.1016/j.elecom.2005.09.032 ↗
22. Long-term operation of bio-catalyzed cathodes within continuous flow membrane-less microbial fuel cells10.1016/j.chemosphere.2020.129059 ↗
23. A “4-cell” modular passive DMFC (direct methanol fuel cell) stack for portable applications10.1016/j.energy.2015.01.033 ↗
24. A review of graphene-based nanostructural materials for both catalyst supports and metal-free catalysts in PEM fuel cell oxygen reduction reactions10.1002/aenm.201301523 ↗
25. Exploring the use of electrochemical impedance spectroscopy (EIS) in microbial fuel cell studies10.1039/B814914C ↗
26. Comparison of corrosion behaviour in presence of oral bacteria10.1016/S0142-9612(00)00416-6 ↗
27. Electrochemical impedance spectroscopy for microbial fuel cell characterization
28. The accurate use of impedance analysis for the study of microbial electrochemical systems10.1039/c2cs35026b ↗
29. An upflow microbial fuel cell with an interior cathode: assessment of the internal resistance by impedance spectroscopy10.1021/es060394f ↗
30. Assessing and improving methods used in operational taxonomic unit-based approaches for 16S rRNA gene sequence analysis10.1128/AEM.02810-10 ↗
31. Robust tests for equality of variances10.1080/01621459.1974.10482955 ↗
32. A guide to appropriate use of Correlation coefficient in medical research
33. Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells10.1021/es062644y ↗
34. Performance and inorganic fouling of a submergible 255 L prototype microbial fuel cell module during continuous long-term operation with real municipal wastewater under practical conditions10.1016/j.biortech.2019.122227 ↗
35. Harvest and utilization of chemical energy in wastes by microbial fuel cells10.1039/C5CS00903K ↗
36. Inhibition of microbial fuel cell operation for municipal wastewater treatment by impact loads of free ammonia in bench-and 45 L-scale10.1016/j.scitotenv.2017.12.072 ↗
37. Towards the scale-up of bioelectrogenic technology: stacking microbial fuel cells to produce larger amounts of electricity10.1007/s10800-017-1101-2 ↗
38. Microbial fuel cell stack power to lithium battery stack: pilot concept for scale up10.1016/j.apenergy.2018.09.030 ↗
39. Effects of the Pt loading side and cathode-biofilm on the performance of a membrane-less and single-chamber microbial fuel cell10.1016/j.biortech.2008.08.005 ↗
40. Electron transfer pathways in microbial oxygen biocathodes10.1016/j.electacta.2009.09.027 ↗
41. Electricity production by Geobacter sulfurreducens attached to electrodes10.1128/AEM.69.3.1548-1555.2003 ↗
42. Electron donors supporting growth and electroactivity of Geobacter sulfurreducens anode biofilms10.1128/AEM.06782-11 ↗
43. Coupling dark metabolism to electricity generation using photosynthetic cocultures10.1002/bit.25011 ↗
44. Unveiling characteristics of dye-bearing microbial fuel cells for energy and materials recycling: redox mediators10.1016/j.ijhydene.2013.03.132 ↗
45. Cathodic reducing bacteria of dual-chambered microbial fuel cell10.1016/j.ijhydene.2017.06.095 ↗
46. Simultaneous nitrification – denitrification and microbial community profile in an oxygen-limiting intermittent aeration SBBR with biodegradable carriers10.1007/s10532-018-9845-x ↗
47. Investigation of microbial structure and composition involved in membrane fouling in the forward osmosis membrane bioreactor treating anaerobic bioreactor effluent10.1016/j.cej.2015.10.084 ↗
48. The isolation and properties of a denitrifying bacterium of the genus Flavobacterium10.1007/BF00394134 ↗
49. Enhanced removal of copper by electroflocculation and electroreduction in a novel bioelectrochemical system assisted microelectrolysis10.1016/j.biortech.2019.122507 ↗
50. Biofouling effects on the performance of microbial fuel cells and recent advances in biotechnological and chemical strategies for mitigation10.1016/j.biotechadv.2019.107420 ↗
51. Anaerobic degradation of benzene, toluene, ethylbenzene, and xylene compounds by Dechloromonas strain RCB10.1128/AEM.71.12.8649-8655.2005 ↗
52. Novel anaerobic electrochemical membrane bioreactor with a CNTs hollow fiber membrane cathode to mitigate membrane fouling and enhance energy recovery10.1021/acs.est.8b05186 ↗
53. Metaproteomic analysis of biocake proteins to understand membrane fouling in a submerged membrane bioreactor10.1021/es504489r ↗
54. Quantitative molecular assay for fingerprinting microbial communities of wastewater and estrogen-degrading consortia10.1128/AEM.71.3.1433-1444.2005 ↗
55. Increasing power recovery and organic removal efficiency using extended longitudinal tubular microbial fuel cell (MFC) reactors, Energy