journal article·2025-01

Role of catalyst layer composition in the degradation of low platinum-loaded proton exchange membrane fuel cell cathodes: An experimental analysis

Asal Saeidfar, Ahmet Can Kirlioglu, Selmiye Alkan Gursel, Serhat Yesilyurt

Publisher page

Abstract

This study investigates the impact of catalyst layer (CL) composition on the performance and durability of proton exchange membrane fuel cells (PEMFCs). Membrane electrode assemblies (MEAs) are manufactured using six different cathode CLs (CCLs) by varying the platinum (Pt)-loading, Pt-to-carbon weight percentages (Pt/C wt.%), mass fraction of bare carbon particles, carbon support material, and CL thicknesses. Each MEA is subjected to comprehensive electrochemical characterization procedures followed by one of the two different accelerated stress tests (ASTs) to analyze the impacts of Pt-dissolution and carbon corrosion degradation mechanisms separately. Experimental results show that the Pt/C wt.% and CL thickness have a dominant role in the rate of Pt- dissolution. While the addition of bare carbon particles decreases the rate of Pt-dissolution degradation, lower Pt/C wt.% causes higher performance loss. The carbon corrosion degradation is more pronounced in high Pt- loaded CLs since Pt particles catalyze the carbon oxidation reaction, whereas for constant Pt-loaded CLs, higher Pt utilization leads to increased degradation and CCL thinning, as observed through post-mortem scanning electron microscopy (SEM). No significant relation is found between the carbon corrosion rate and the CL thickness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Impact of carbon support meso-porosity on mass transport and performance of PEMFC cathode catalyst layers10.1002/cctc.202101162 ↗
2. Challenges in applying highly active Pt-based nanostructured catalysts for oxygen reduction reactions to fuel cell vehicles10.1038/s41565-020-00824-w ↗
3. Modeling of PEM fuel cell catalyst layers: status and outlook10.1007/s41918-019-00043-5 ↗
4. Ionomer content effect on charge and gas transport in the cathode catalyst layer of proton-exchange membrane fuel cells10.1016/j.jpowsour.2021.229531 ↗
5. Impact of platinum loading and catalyst layer structure on PEMFC performance10.1149/2.072308jes ↗
6. Membrane electrode assembly with enhanced platinum utilization for high temperature proton exchange membrane fuel cell prepared by catalyst coating membrane method10.1016/j.jpowsour.2014.05.014 ↗
7. A one-dimensional model for Pt degradation and precipitation in proton exchange membrane fuel cell considering Pt nucleation, particle size growth, and band formation10.1016/j.electacta.2023.143590 ↗
8. Mitigation of PEM fuel cell catalyst degradation with porous carbon supports10.1149/2.0371904jes ↗
9. Electrochemical impedance spectroscopy of catalyst and carbon degradations in proton exchange membrane fuel cells10.1016/j.jpowsour.2019.226922 ↗
10. Model-assisted analysis and prediction of activity degradation in PEM-fuel cell cathodes10.1016/j.jpowsour.2023.232771 ↗
11. Cathode loading impact on voltage cycling induced PEMFC degradation: a voltage loss analysis10.1149/2.0161806jes ↗
12. Impact of platinum loading and layer thickness on cathode catalyst degradation in PEM fuel cells10.1149/1945-7111/acb8df ↗
13. Tailoring catalyst morphology towards high performance for low Pt loaded PEMFC cathodes10.1149/2.0311810jes ↗
14. Comparison of the performance and degradation mechanism of PEMFC with Pt/C and Pt black catalyst10.1016/j.ijhydene.2021.11.135 ↗
15. High-performance and durable cathode catalyst layer with hydrophobic C@PTFE particles for low-Pt loading membrane assembly electrode of PEMFC10.1016/j.enconman.2019.04.014 ↗
16. Platinum dissolution in fuel cell electrodes: enhanced degradation from surface area assessment in automotive accelerated stress tests10.1149/2.0371510jes ↗
17. The impact of cycle profile on PEMFC durability10.1149/1.2781035 ↗
18. Electrocatalyst durability under simulated automotive drive cycles10.1149/1.2981858 ↗
19. Catalyst degradation in fuel cell electrodes: accelerated stress tests and model-based analysis10.1016/j.electacta.2015.03.152 ↗
20. Dissolution of platinum in the operational range of fuel cells10.1002/celc.201500098 ↗
21. A reverse-current decay mechanism for fuel cells10.1149/1.1896466 ↗
22. Impact of carbon support corrosion on performance losses in polymer electrolyte membrane fuel cells10.1149/2.0611913jes ↗
23. Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): a review10.1016/j.jpowsour.2020.229434 ↗
24. Effects of carbon corrosion on mass transfer losses in proton exchange membrane fuel cells10.1016/j.ijhydene.2016.08.223 ↗
25. Carbon corrosion behaviors and the mechanical properties of proton exchange membrane fuel cell cathode catalyst layer10.1016/j.ijhydene.2020.06.170 ↗
26. The influence of catalyst layer thickness on the performance and degradation of PEM fuel cell cathodes with constant catalyst loading10.1016/j.electacta.2017.02.101 ↗
27. Carbon corrosion in PEM fuel cells and the development of accelerated stress tests10.1149/2.0061806jes ↗
28. High performance electrocatalysts supported on graphene based hybrids for polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2018.10.222 ↗
29. Recent advancements in high performance polymer electrolyte fuel cell electrode fabrication – novel materials and manufacturing processes10.1016/j.jpowsour.2023.232734 ↗
30. Manufacturing catalyst-coated membranes by ultrasonic spray deposition for PEMFC: identification of key parameters and their impact on PEMFC performance10.1016/j.ijhydene.2022.03.043 ↗
31. Fabrication method for laboratory-scale high-performance membrane electrode assemblies for fuel cells10.1021/acs.analchem.6b03005 ↗
32. A novel method for preparing proton exchange membrane fuel cell electrodes by the ultrasonic-spray technique10.1016/j.jpowsour.2011.06.024 ↗
33. Fast and reliable state-of-health model of a PEM cathode catalyst layer10.1149/2.0881904jes ↗
34. Hydrogen oxidation artifact during platinum oxide reduction in cyclic voltammetry analysis of low-loaded PEMFC electrodes10.1007/s12678-020-00627-6 ↗
35. A linear kronig‐kramers Transform test for immittance data validation10.1149/1.2044210 ↗
36. Electrochemical impedance analysis with transmission line model for accelerated carbon corrosion in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2018.06.093 ↗
37. Investigation of charge-transfer and mass-transport resistances in PEMFCs with microporous layer using electrochemical impedance spectroscopy10.1149/1.3033408 ↗
38. Determination of oxygen mass transport resistance in proton exchange membrane fuel cells with an open flow field architecture10.1016/j.electacta.2021.138529 ↗
39. Decoupling catalyst aggregation, ripening, and coalescence processes inside operating fuel cells10.1016/j.jpowsour.2021.230851 ↗
40. Analysis of water adsorption and condensation in catalyst layers for polymer electrolyte fuel cells10.1016/j.electacta.2014.07.058 ↗
41. An overview of the proton conductivity of nafion membranes through a statistical analysis10.1016/j.memsci.2015.12.065 ↗
42. Numerical investigation of the effects of catalyst layer composition and channel to rib width ratios for low platinum loaded PEMFCs10.1016/j.apenergy.2023.121040 ↗
43. Synthesis and physical/electrochemical characterization of Pt/C nanocatalyst for polymer electrolyte fuel cells10.1016/j.jpowsour.2004.02.021 ↗
44. Reduced graphene oxide-supported pt-based catalysts for pem fuel cells with enhanced activity and stability10.3390/catal11020256 ↗
45. High performance PEM fuel cell catalyst layers with hydrophobic channels10.1016/j.ijhydene.2015.02.004 ↗
46. Analysis of the effect of Pt loading on mass and specific activity in PEM fuel cells10.1149/2.075304jes ↗
47. Electrochemical activity and catalyst utilization of low Pt and thickness controlled membrane electrode assemblies10.1149/1.3559188 ↗
48. Catalyst durability in PEM fuel cells with low platinum loading10.1149/2.jes113064 ↗
49. The effects of Nafion® ionomer content in PEMFC MEAs prepared by a catalyst-coated membrane (CCM) spraying method10.1016/j.ijhydene.2009.11.058 ↗
50. Relative-humidity dependence of electrochemically active surface area in porous carbon catalyst layers10.1149/1945-7111/ad09fc ↗
51. Peak utilization of catalyst with ultra-low Pt loaded PEM fuel cell electrodes prepared by the electrospray method10.1016/j.jpowsour.2012.12.029 ↗
52. Measurement of catalyst layer electrolyte resistance in PEFCs using electrochemical impedance spectroscopy10.1149/1.1888367 ↗
53. Cathode catalyst layer design with gradients of ionomer distribution for proton exchange membrane fuel cells10.1016/j.enconman.2018.06.078 ↗
54. The impact of platinum loading on oxygen transport resistance10.1149/2.061212jes ↗
55. Investigation of cathode catalyst layer interfaces evolution during accelerated stress tests for polymer electrolyte fuel cells10.1016/j.apcatb.2021.120810 ↗
56. The effect of platinum on carbon corrosion behavior in polymer electrolyte fuel cells10.1016/j.electacta.2011.06.093 ↗
57. 3D Imaging of catalyst support corrosion in polymer electrolyte fuel cells10.1021/jp203016u ↗