journal article·2024-12Open access

Impact of Mn/Ni and Li/(Mn+Ni) ratios on phase equilibrium and electrochemical performance of the high voltage spinel LiNi0.5Mn1.5O4

Ilia Tertov, HunHo Kwak, Emmanuelle Suard, Pierre-Etienne Cabelguen, Shinichi Kumakura, François Fauth, Thomas Hansen, Christian Masquelier, Laurence Croguennec

Abstract

LiNi 0.5 Mn 1.5 O 4 (LNMO) emerges as a promising spinel-type positive electrode material for lithium-ion batteries (LIBs) due to its low cost and high operating voltage (4.8 V vs. Li + /Li), attributed to the Ni 4+ /Ni 3+ /Ni 2+ redox couples, which contribute to high energy density , a crucial requirement for next-generation LIBs. In this study, we investigate the influence of Mn/Ni and Li/(Mn + Ni) ratios on the phase equilibrium and electrochemical performance of LNMO positive electrode materials. A series of 18 samples were synthesized using a two-stage solid-state method with varying Mn/Ni and Li/(Mn + Ni) ratios and annealing under different atmospheres. These synthesis conditions have major impact on the composition and level of purity of LNMO phases, as well as on the nature of the impurities themselves. Mn excess significantly enhances the electrochemical performance, with superior discharge capacity, coulombic efficiency, and capacity retention for the Mn-rich sample with Li/(Mn + Ni) = 0.50. A comprehensive structural analysis combining synchrotron X-ray and neutron powder diffraction gives an in-depth characterization of these samples with a clear differentiation between the global Mn content within samples and that within the LNMO phase.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Ferroelectric and Piezoelectric Materials · Electrical and Thermal Properties of Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Developing high-voltage spinel LiNi0.5Mn1.5O4 cathodes for high-energy-density lithium-ion batteries: current achievements and future prospects10.1039/D0TA02812F ↗
2. Mn2+ or Mn3+ ? Investigating transition metal dissolution of manganese species in lithium ion battery electrolytes by capillary electrophoresis10.1002/elps.201900443 ↗
3. Surface and interface issues in spinel LiNi0.5Mn1.5O4 : insights into a potential cathode material for high energy density lithium ion batteries10.1021/acs.chemmater.6b00948 ↗
4. Understanding the role of lithium borate as the surface coating on high voltage single crystal LiNi0.5Mn1.5O410.1002/adfm.202312091 ↗
5. Surface chemistry of LiNi0.5Mn1.5O4 particles coated by Al2O3 using atomic layer deposition for lithium-ion batteries10.1016/j.jpowsour.2014.10.207 ↗
6. Electrolyte reactions with the surface of high voltage LiNi0.5Mn1.5O4 cathodes for lithium-ion batteries10.1149/1.3428515 ↗
7. Self-discharge suppression of 4.9 V LiNi0.5Mn1.5O4 cathode by using tris(trimethylsilyl)borate as an electrolyte additive10.1016/j.jpowsour.2014.08.117 ↗
8. Atomic defects during ordering transitions in LiNi0.5Mn1.5O4 and their relationship with electrochemical properties10.1039/C6TA00424E ↗
9. A comparative study of Fd-3m and P4332 “LiNi0.5Mn1.5O4,”10.1016/j.ssi.2011.04.007 ↗
10. Integrated nano-domains of disordered and ordered spinel phases in LiNi0.5Mn1.5O4 for Li-ion batteries10.1021/cm501203r ↗
11. Composition-structure relationships in the Li-ion battery electrode material LiNi0.5Mn1.5O410.1021/cm301148d ↗
12. Relationships between Mn 3+ content, structural ordering, phase transformation, and kinetic properties in LiNixMn2–xO4 cathode materials10.1021/cm502607v ↗
13. Versatile approach combining theoretical and experimental aspects of Raman spectroscopy to investigate battery materials: the case of the LiNi0.5Mn1.5O4 spinel10.1021/acs.jpcc.6b04155 ↗
14. Identification of degree of ordering in spinel LiNi0.5Mn1.5O4 through NMR and Raman spectroscopies supported by theoretical calculations10.2139/ssrn.4711856 ↗
15. Oxygen nonstoichiometry and phase transitions in LiMn1.5Ni0.5O4−δ10.1149/1.2832650 ↗
16. Unraveling structural evolution of LiNi0.5Mn1.5O4 by in situ neutron diffraction10.1039/c3ta00145h ↗
17. High-power nanostructured LiMn2-xNixO4 high-voltage lithium-ion battery electrode materials: electrochemical impact of electronic conductivity and morphology10.1021/cm060729s ↗
18. Effect of oxygen non-stoichiometry and temperature on cation ordering in LiMn2−xNixO4 (0.50≥x≥0.36) spinels10.1016/j.jpowsour.2006.11.051 ↗
19. Cation ordering and oxygen release in LiNi0.5–xMn1.5+xO4–y (LNMO): in situ neutron diffraction and performance in Li ion full cells10.1021/acsaem.8b02217 ↗
20. How Mn/Ni ordering controls electrochemical performance in high-voltage spinel LiNi0.44Mn1.56O4 with fixed oxygen content10.1021/acsaem.0c01075 ↗
21. Molten salt synthesis of multifaceted pure-phase spinel LiNi0.5Mn1.5O4 platelets10.1021/acsaem.3c01328 ↗
22. Understanding the capacity loss in LiNi0.5Mn1.5O4 – Li4Ti5O12 lithium-ion cells at ambient and elevated temperatures10.1021/acs.jpcc.8b02204 ↗
23. The crystallography stations at the Alba synchrotron
24. Crystallographic computing system JANA2006: general features10.1515/zkri-2014-1737 ↗
25. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
26. There and back again—the journey of LiNiO2 as a cathode active material10.1002/anie.201812472 ↗
27. Structural insights into composition design of Li-rich layered cathode materials for high-energy rechargeable battery10.1016/j.mattod.2021.10.020 ↗
28. Li-rich Li1+xMn2–xO4 spinel electrode materials: an operando neutron diffraction study during Li + extraction/insertion10.1021/jp509027g ↗
29. Chemical and magnetic characterization of spinel materials in the LiMn2O4–Li2Mn4O9–Li4Mn5O12 System10.1006/jssc.1996.0176 ↗
30. Improved capacity retention in rechargeable 4 V lithium/lithium-manganese oxide (spinel) cells10.1016/0167-2738(94)90450-2 ↗
31. The spinel and cubic rocksalt solid-solutions in the Li–Mn–Ni oxide pseudo-ternary system10.1016/j.ssi.2013.04.003 ↗
32. Solid state chemistry for developing better metal-ion batteries10.1038/s41467-020-18736-7 ↗
33. The role of O2 in O-redox cathodes for Li-ion batteries10.1038/s41560-021-00780-2 ↗
34. Cation-disordered rocksalt transition metal oxides and oxyfluorides for high energy lithium-ion cathodes10.1039/C9EE02803J ↗