In-situ carbon encapsulated Pb/PbO nanoparticles derived from spent lead paste for lead-carbon battery
Source abstract
Abstract
The sulfation and serious hydrogen evolution reaction render a substantial obstacle for the further development of lead-carbon batteries (LCBs). Herein, lead tartrate precursors derived from spent lead paste are pyrolyzed to in-situ synthesize a carbon encapsulated Pb/PbO nanoparticles, which are introduced as additives into the negative electrodes of LCBs. The in-situ formed carbon encapsulation Pb/PbO nanoparticles ensure the long-lasting inhibition of the hydrogen evolution reaction in the negative electrodes. The discharge capacity after the introduction of the composites is improved by 24 % compared with the control at 0.1C, and the cycle life is almost twice as long as the control. The remarkable hydrophilicity of the composites as 3D electro-osmotic pumps facilitates the absorption and transportation of electrolyte to the negative active materials. Additionally, the carbon encapsulated Pb/PbO nanoparticles could provide abundant nucleation sites for Pb/PbSO 4 conversion and reinforce the reversibility of the transformation between the substances. Benefiting the cooperative interaction between the multiple mechanisms in the composites, the sulfation and serious hydrogen evolution on the negative electrode are dramatically inhibited, consequently thus contributing to the admirable promotion of the overall performances of LCBs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Past, present, and future of lead-acid batteries10.1126/science.abd3352 ↗
2. Preparation of composite cathode material by using the extracted lead (Pb) of waste lead acid battery for LT-SOFC10.1016/j.ceramint.2022.03.105 ↗
3. Hierarchical porous carbon@PbO1-x composite for high-performance lead-carbon battery towards renewable energy storage10.1016/j.energy.2019.116675 ↗
4. Lead-acid batteries and lead–carbon hybrid systems: a review10.1016/j.jpowsour.2023.233312 ↗
5. Modeling the crystal distribution of lead-sulfate in lead-acid batteries with 3D spatial resolution10.1016/j.jpowsour.2014.12.157 ↗
6. Solid state reactions at metal/film interfaces: the case of the Pb/PbSO4 interface10.1016/j.jpowsour.2012.03.026 ↗
7. Thorn-like and dendrite lead sulfate as negative electrode materials for enhancing the cycle performance of lead-acid batteries10.1016/j.est.2022.104112 ↗
8. The application of rice husk-based porous carbon in positive electrodes of lead acid batteries10.1016/j.est.2020.101392 ↗
9. Impact of carbon additives on lead-acid battery electrodes: a review10.1016/j.rser.2022.113078 ↗
10. Boron doped graphene nanosheets as negative electrode additive for high-performance lead-acid batteries and ultracapacitors10.1016/j.jallcom.2019.04.311 ↗
11. Rapid preparation of nano lead sulfate-lead carbon black composite by microwave method as a negative electrode additive for lead-carbon batteries10.1016/j.electacta.2021.138411 ↗
12. Preparation of lead sulfide-lead carbon black composites by microwave method to improve the electrical properties from recycled lead powder10.1016/j.est.2022.104962 ↗
13. The influence of the characteristics of rice husk-based activated carbon on the performance of lead-carbon batteries and its potential mechanisms10.1016/j.electacta.2021.139688 ↗
14. Preparation of N-doped biomass C@SnO2 composites and its electrochemical performance10.1016/j.diamond.2021.108674 ↗
15. Hierarchical tubular porous carbon derived from mulberry branches for long-life lead-carbon battery10.1016/j.est.2023.107162 ↗
16. Graphitized carbon nanofibers: new additive for the negative active material of lead acid batteries10.1016/j.electacta.2017.10.067 ↗
17. Vapor-grown carbon fibers (VGCFs) - Basic properties and their battery applications10.1016/S0008-6223(00)00295-5 ↗
18. Effects of sulfonated graphene on lead sulfate negative electrode of Pb-C batteries10.1016/j.est.2020.102174 ↗
19. Construction of a novel three-dimensional porous lead-carbon network for improving the reversibility of deep discharge lead-carbon batteries10.1016/j.jelechem.2021.115065 ↗
20. A new nano lead-doped mesoporous carbon composite as negative electrode additives for ultralong-cyclability lead-carbon batteries10.1016/j.cej.2017.12.089 ↗
21. Capacitive carbon and electrochemical lead electrode systems at the negative plates of lead–acid batteries and elementary processes on cycling10.1016/j.jpowsour.2013.05.065 ↗
22. Consequences of including carbon in the negative plates of Valve-regulated Lead–Acid batteries exposed to high-rate partial-state-of-charge operation10.1016/j.jpowsour.2008.08.084 ↗
23. Research progresses of cathodic hydrogen evolution in advanced lead–acid batteries10.1007/s11434-016-1023-0 ↗
24. Significance of PbO deposition ratio in activated carbon-based lead-carbon composites for lead-carbon battery under high-rate partial-state-of-charge operation10.1016/j.electacta.2020.135868 ↗
25. Stereotaxically constructed graphene/nano lead composite for enhanced cycling performance of lead-acid batteries10.1016/j.est.2020.102192 ↗
26. Nanoconfinement and Interfacial effect of Pb nanoparticles into Nanoporous carbon as a Longer-Lifespan negative electrode material for hybrid lead-carbon battery10.1021/acssuschemeng.0c03461 ↗
27. N-doped reduced graphene oxide loading nano lead oxide as negative additive for enhanced properties of lead-carbon batteries10.1016/j.elecom.2022.107422 ↗
28. Effect of the lead deposition on the performance of the negative electrode in an aqueous lead–carbon hybrid capacitor10.1016/j.jechem.2020.06.045 ↗
29. Novel recycling process for lead-acid battery paste without SO2 generation - reaction mechanism and industrial pilot campaign10.1016/j.jclepro.2019.01.197 ↗
30. Novel PbO@C composite material directly derived from spent lead-acid batteries by one-step spray pyrolysis process10.1016/j.wasman.2023.04.022 ↗
31. Recycling spent lead acid batteries into aqueous zinc-ion battery material with ultra-flat voltage platforms10.1016/j.ceramint.2022.05.253 ↗
32. Synthesis of submicron lead oxide particles from the simulated spent lead paste for battery anodes10.1016/j.jallcom.2016.08.094 ↗
33. Transformation process of cathode lead structure in the recovery of waste lead paste by suspension electrolysis10.1016/j.elecom.2022.107361 ↗
34. Recovery of high purity lead from spent lead paste via direct electrolysis and process evaluation10.1016/j.seppur.2019.05.023 ↗
35. Green hydrometallurgical extraction of metallic lead from spent lead paste in the methanesulfonic acid system10.1016/j.seppur.2022.122592 ↗
36. Facile method for preparing a nano lead powder by vacuum decomposition from spent lead-acid battery paste: leaching and desulfuration in tartaric acid and sodium tartrate mixed lixivium10.1016/j.hydromet.2020.105450 ↗
37. Clean recycling process for lead oxide preparation from spent lead–acid battery pastes using tartaric acid–sodium tartrate as a transforming agent10.1007/s11837-019-03798-w ↗
38. PbO nanoparticles anchored on reduced graphene oxide for enhanced cycle life of lead-carbon battery10.1016/j.electacta.2022.141228 ↗
39. New insights into carbonaceous materials and lead/carbon composites in lead carbon battery10.1016/j.est.2022.106019 ↗
40. Nitrogen-doped redox graphene as a negative electrode additive for lead-acid batteries10.1016/j.est.2021.103454 ↗
41. Dual-templated synthesis of mesoporous lignin-derived honeycomb-like porous carbon/SiO2 composites for high-performance Li-ion battery10.1016/j.micromeso.2021.111004 ↗
42. Sulfonated porous carbon nanosheets derived from oak nutshell based high-performance supercapacitor for powering electronic devices10.1016/j.renene.2020.06.004 ↗
43. Lead single atoms anchored on reduced graphene oxide as multifunctional additive for lead–carbon battery10.1016/j.cej.2023.141992 ↗
44. Using silkworm excrement and spent lead paste to prepare additives for improving the cycle life of lead-acid batteries10.1016/j.est.2021.102785 ↗
45. Improving the performance of recovered lead oxide powder from waste lead paste as active material for lead‐acid battery10.1002/er.8140 ↗
46. Synthesis of nanostructured PbO@C composite derived from spent lead-acid battery for Next-generation lead-carbon battery
47. In-situ synthesis of novel nanostructured Pb@C composites for improving the performance of lead-acid batteries under high-rate partial-state-of-charge operation10.1016/j.est.2020.102082 ↗
48. New high‐performance Pb‐based Nanocomposite Anode enabled by wide‐range Pb redox and zintl phase transition
49. Hierarchical porous carbon material regenerated from natural bamboo-leaf: how to improve the performance of lead-carbon batteries?10.1016/j.jpowsour.2021.230664 ↗
50. Sulfation on coated carbon related to lead ion and its effect on the performance of advanced ultra-battery at high rate10.1016/j.cej.2020.128151 ↗