Analyzing local degradation in an industrial PEMFC under EPA US06 drive cycle via 3D-CFD
Source abstract
Abstract
Considerable research efforts have been made to investigate the degradation mechanisms of various components of proton exchange membrane fuel cells (PEMFCs). However, understanding the degradation of large active area PEMFCs under automotive operating conditions remains an important research focus. In this study, an unsteady 3D computational fluid dynamics (CFD) model in combination with 1D models for carbon corrosion, platinum dissolution and hydrogen peroxide production provides detailed insights into the degradation potential of a PEMFC. Typical degradation phenomena in PEMFCs are influenced by local factors such as potential, temperature and humidity. These internal states cannot be easily captured with conventional measurement methods. The simulation of a driving cycle with high dynamic load at two humidification states of the intake air showed significant local variations. Although the hydrogen peroxide concentration in the anode catalyst layer decreases at high humidity by 25%, the Pt/C catalyst decomposition in the cathode catalyst layer increases. Low humidity conditions lead to strong temporal fluctuations of the water content in the membrane, which increases the risk of mechanical fatigue. Despite the increased Pt/C decomposition observed at high humidity, improved homogeneity of the local potentials within the catalyst layers and the water content of the membrane mitigates ionomer degradation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. The role of hydrogen and fuel cells in the global energy system10.1039/C8EE01157E ↗
2. Hydrogen fuel cell heavy-duty trucks: Review of main research topics10.1016/j.ijhydene.2022.06.271 ↗
3. Klell · 2018
4. Marcinkoski · 2019 · 31
5. Padgett · 2020 · 5
6. Design of durability test protocol for vehicular fuel cell systems operated in power-follow mode based on statistical results of on-road data10.1016/j.jpowsour.2017.11.075 ↗
7. Main degradation mechanisms of polymer electrolyte membrane fuel cell stacks – Mechanisms, influencing factors, consequences, and mitigation strategies
8. Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions10.1016/j.pecs.2020.100859 ↗
9. A review of polymer electrolyte membrane fuel cell durability for vehicular applications: Degradation modes and experimental techniques10.1016/j.enconman.2019.112022 ↗
10. The dynamics of platinum precipitation in an ion exchange membrane10.1149/1.3532956 ↗
11. Electrochemical Ostwald ripening of Pt and Ag catalysts supported on carbon10.1016/j.jpowsour.2013.01.115 ↗
12. Membrane degradation mechanism during open-circuit voltage hold test10.1016/j.jpowsour.2008.03.078 ↗
13. Ionomer degradation in polymer electrolyte membrane fuel cells10.1149/1.3281899 ↗
14. Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: A review10.1039/C7SE00038C ↗
15. Kinetic study of Nafion degradation by Fenton reaction10.1016/j.jpowsour.2010.10.043 ↗
16. Mitigation of chemical membrane degradation in fuel cells: Understanding the effect of cell voltage and iron ion redox cycle10.1002/cssc.201402957 ↗
17. Durability of PEM fuel cell cathode in the presence of Fe3+ and Al3+10.1016/j.jpowsour.2010.07.003 ↗
18. Carbon corrosion induced by membrane failure: The weak link of PEMFC long-term performance10.1016/j.ijhydene.2014.07.099 ↗
19. PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode10.1016/j.jpowsour.2005.10.059 ↗
20. Polarization study of a PEMFC with four reference electrodes at hydrogen starvation conditions10.1016/j.jpowsour.2008.01.001 ↗
21. Effect of hygral swelling and shrinkage on mechanical durability of fuel cell membranes10.1016/j.jpowsour.2019.04.081 ↗
22. Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses10.1016/j.jpowsour.2007.03.063 ↗
23. Decay in mechanical properties of catalyst coated membranes subjected to combined chemical and mechanical membrane degradation10.1002/fuce.201400040 ↗
24. Combined effects of environmental vibrations and hygrothermal fatigue on mechanical damage in PEM fuel cells10.1016/j.ijhydene.2014.11.125 ↗
25. Realistic accelerated stress tests for PEM fuel cells: Test procedure development based on standardized automotive driving cycles10.1016/j.ijhydene.2023.08.292 ↗
26. A quick evaluating method for automotive fuel cell lifetime10.1016/j.ijhydene.2008.04.048 ↗
27. Load profile based empirical model for the lifetime prediction of an automotive PEM fuel cell10.1016/j.ijhydene.2017.02.146 ↗
28. Zhang · 2021
29. Structure, property, and performance of catalyst layers in proton exchange membrane fuel cells10.1007/s41918-022-00175-1 ↗
30. Comparative investigation on the activity degradation mechanism of Pt/C and PtCo/C electrocatalysts in PEMFCs during the accelerate degradation process characterized by an in situ X-ray absorption fine structure10.1021/acscatal.9b04598 ↗
31. Modeling of polymer electrolyte fuel cells
32. Computational fluid dynamics modelling of proton exchange membrane fuel cells: Accuracy and time efficiency10.1016/j.ijhydene.2023.09.004 ↗
33. A mathematical model toward real-time monitoring of automotive PEM fuel cells10.1149/1945-7111/ab6dd1 ↗
34. A real-time capable quasi-2D proton exchange membrane fuel cell model10.1016/j.enconman.2018.02.028 ↗
35. A real time capable quasi 3D system level model of PEM fuel cells10.1002/fuce.201900025 ↗
36. Physically motivated water modeling in control-oriented polymer electrolyte membrane fuel cell stack models10.3390/en14227693 ↗
37. Real-time capable transient model of liquid water dynamics in proton exchange membrane Fuel Cells10.1016/j.jpowsour.2022.231598 ↗
38. Water sorption, desorption and transport in Nafion membranes10.1016/j.memsci.2007.06.022 ↗
39. Characterization of the dynamic response of proton exchange membrane fuel cells – A numerical study10.1016/j.ijhydene.2010.08.071 ↗
40. Transients of water distribution and transport in PEM fuel cells10.1149/1.3236646 ↗
41. Validation of a three dimensional PEM fuel cell CFD model using local liquid water distributions measured with neutron imaging10.1016/j.ijhydene.2014.02.115 ↗
42. Three-dimensional multi-phase simulation of PEMFC at high current density utilizing Eulerian-Eulerian model and two-fluid model10.1016/j.enconman.2018.09.031 ↗
43. Mapping of heterogeneous catalyst degradation in polymer electrolyte fuel cells10.1002/aenm.202000623 ↗
44. CFD simulation of an industrial PEM fuel cell with local degradation effects10.1002/fuce.201900197 ↗
45. Effect of humidification on distribution and uniformity of reactants and water content in PEMFC10.1016/j.ijhydene.2021.05.129 ↗
46. Unsteady 3D-CFD simulation of a large active area PEM fuel cell under automotive operation conditions—efficient parameterization and simulation using numerically reduced models10.3390/pr10081605 ↗
47. Large-scale three-dimensional simulation of proton exchange membrane fuel cell considering detailed water transition mechanism10.1016/j.apenergy.2022.120469 ↗
48. Performance simulation and key parameters in-plane distribution analysis of a commercial-size PEMFC10.1016/j.energy.2022.125897 ↗
49. Application of an ageing model to a hydrogen-fuelled PEM fuel cell10.1051/e3sconf/202131207005 ↗
50. Three-dimensional multiphase simulation and multi-objective optimization of PEM fuel cells degradation under automotive cyclic loads10.1016/j.enconman.2021.113837 ↗
51. Simulation of membrane chemical degradation in a proton exchange membrane fuel cell by computational fluid dynamics10.1016/j.ijhydene.2020.09.179 ↗
52. Three-dimensional modeling for a 100 Cm2 PEMFC with different Pt loadings under cathode Pt catalyst degradation10.1016/j.ijhydene.2023.12.118 ↗
53. A 3D PtCo degradation model for long-term performance prediction of a scaled-up PEMFC under constant voltage operation10.1016/j.enconman.2023.117918 ↗
54. Lohse-Busch · 2016
55. PEMFC performance decay during real-world automotive operation: Evincing degradation mechanisms and heterogeneity of ageing10.1016/j.jpowsour.2022.232246 ↗
56. Barbir · 2013
57. O’Hayre · 2016
58. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
59. Absorption, desorption, and transport of water in polymer electrolyte membranes for fuel cells10.1149/1.1899263 ↗
60. Macroscopic in-situ modeling of chemical membrane degradation in polymer electrolyte fuel cells10.1149/2.0031409jes ↗
61. Predictive system-level modeling framework for transient operation and cathode platinum degradation of high temperature proton exchange membrane fuel cells10.1016/j.apenergy.2020.114547 ↗
62. Chemical degradation of Nafion membranes under mimic fuel cell conditions as investigated by solid-state NMR spectroscopy10.1021/jp102533v ↗
63. A carbon corrosion model to evaluate the effect of steady state and transient operation of a polymer electrolyte membrane fuel cell10.1149/2.036309jes ↗
64. Kinetic model of platinum dissolution in PEMFCs10.1149/1.1613669 ↗
65. Potentiostatic and potential cycling dissolution of polycrystalline platinum and platinum nano-particle fuel cell catalysts10.1149/2.0211806jes ↗
66. A one-dimensional model for Pt degradation and precipitation in proton exchange membrane fuel cell considering Pt nucleation, particle size growth, and band formation10.1016/j.electacta.2023.143590 ↗
67. Issues associated with modelling of proton exchange membrane fuel cell by computational fluid dynamics10.1016/j.jpowsour.2017.01.059 ↗
68. Regression analysis of PEM fuel cell transient response10.1007/s40095-016-0209-1 ↗
69. Short circuit characteristics of PEM fuel cells for grid integration applications10.3390/electronics9040602 ↗
70. Parameter identification of a quasi-3D PEM fuel cell model by numerical optimization10.3390/pr9101808 ↗
71. A computationally efficient hybrid 3D analytic-numerical approach for modelling species transport in a proton exchange membrane fuel cell10.1016/j.jpowsour.2013.01.136 ↗
72. An innovative hybrid 3D analytic-numerical approach for system level modelling of PEM fuel cells10.3390/en6105426 ↗
73. Lohse-Busch · 2018
74. Experimental parameter uncertainty in proton exchange membrane fuel cell modeling. Part I: Scatter in material parameterization10.1016/j.jpowsour.2019.227018 ↗
75. Insight into the evolution of membrane chemical degradation in proton exchange membrane fuel cells:From theoretical analysis to model developing10.1016/j.jpowsour.2024.234238 ↗
76. Modeling the effect of chemical membrane degradation on PEMFC performance10.1149/2.0351806jes ↗
77. Impact of electrochemical pre-treatment step on accelerated ageing of membrane under OCV protocol in polymer electrolyte membrane fuel cell10.1149/08301.0111ecst ↗
78. Load cycle durability of a graphitized carbon black-supported platinum catalyst in polymer electrolyte fuel cell cathodes10.1016/j.jpowsour.2016.05.117 ↗
79. Mathematical model of platinum movement in PEM fuel cells10.1149/1.1836156 ↗
80. Effect of operating conditions on carbon corrosion in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.04.006 ↗
81. Carbon support oxidation in PEM fuel cell cathodes10.1016/j.jpowsour.2007.08.053 ↗
82. The effect of humidity and oxygen partial pressure on degradation of Pt/C catalyst in PEM fuel cell10.1016/j.electacta.2008.10.008 ↗
83. Microstructure effects on the electrochemical corrosion of carbon materials and carbon-supported Pt catalysts10.1016/j.electacta.2010.07.047 ↗
84. Modeling of PEM fuel cell Pt/C catalyst degradation10.1016/j.jpowsour.2007.12.007 ↗