Realization of high mass loading LiNi0.5Mn1.5O4 Li-ion cathodes using water-soluble carrageenan as binder
Source abstract
Abstract
Cobalt-free LiNi0.5Mn1.5O4 (LNMO) is considered a very promising cathode material candidate for more sustainable lithium-ion batteries, especially when processed into electrodes using water-soluble, fluorine-free binding agents. However, the realization of high-performance electrodes with commercially relevant active material mass loadings remained challenging so far, as such binders are commonly rather brittle and/or suffer from an insufficient electrochemical stability towards oxidation. Herein, we report the use of (citric acid cross-linked) carrageenan as alternative binder for LNMO cathodes, enabling the realization of electrodes with an active material mass loading as high as 20 mg cm−2. These electrodes show suitable mechanical, physicochemical, and electrochemical properties and offer very good cycle life and rate capability in half-cells graphite‖LNMO full-cells with a capacity retention of about 76% after 1000 cycles at 1C. A particular advantage of carrageenan is that it is already available at industrial scale, rendering its practical use rather straightforward.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. A bottom-up approach to lithium-ion battery cost modeling with a focus on cathode active materials10.3390/en12030504 ↗
2. Identifying supply risks by mapping the cobalt supply chain10.1016/j.resconrec.2020.104743 ↗
3. High-voltage positive electrode materials for lithium-ion batteries10.1039/C6CS00875E ↗
4. Lithium-ion batteries – current state of the art and anticipated developments10.1016/j.jpowsour.2020.228708 ↗
5. A novel DEMS approach for studying gas evolution at battery-type electrode|electrolyte interfaces: high-voltage LiNi0.5Mn1.5O4 cathode in ethylene and dimethyl carbonate electrolytes10.1016/j.electacta.2019.05.076 ↗
6. Electrochemical cross-talk leading to gas evolution and capacity fade in LiNi0.5Mn1.5O4/graphite full-cells10.1021/acs.jpcc.6b11184 ↗
7. Understanding transition-metal dissolution behavior in LiNi 0.5 Mn 1.5 O 4 high-voltage spinel for lithium ion batteries10.1021/jp405158m ↗
8. A high-voltage and high-capacity Li1+x Ni0.5 Mn1.5 O4 cathode material: from synthesis to full lithium-ion cells10.1002/cssc.201600365 ↗
9. Understanding the capacity fading mechanism in LiNi0.5Mn 1.5O4/graphite Li-ion batteries10.1016/j.electacta.2012.12.069 ↗
10. Role of oxygen vacancies on the performance of Li[Ni 0.5-xMn 1.5+ x]O 4 (x = 0, 0.05, and 0.08) spinel cathodes for lithium-ion batteries10.1021/cm301825h ↗
11. Syntheses and electrochemical properties of the Na-doped LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries10.1016/j.electacta.2014.07.140 ↗
12. On the electrochemical properties of the Fe-Ti doped LNMO material LiNi0.5Mn1.37Fe0.1Ti0.03O3.9510.1039/D2TA00299J ↗
13. Improved electrochemical performance of LiNi0.4Ti0.1Mn1.5O4 as cathode of lithium ion battery by carbon-coating10.1039/C4RA07921C ↗
14. Study of LiNi 0.5 Mn 1.5 O 4 morphological features for reduced electrolyte decomposition at high potential10.1149/2.0541603jes ↗
15. Crystal engineering of TMPOx-coated LiNi0.5Mn1.5O4 cathodes for high-performance lithium-ion batteries10.1016/j.mattod.2020.04.003 ↗
16. Octahedral and truncated high-voltage spinel cathodes: the role of morphology and surface planes in electrochemical properties10.1039/c3ta00682d ↗
17. Density functional theory analysis of surface structures of spinel LiNi0.5Mn1.5O4 cathode materials10.1007/s10853-016-0357-y ↗
18. Synergistic electrolyte additives for enhancing the performance of high-voltage lithium-ion cathodes in half-cells and full-cells10.1016/j.jpowsour.2020.228975 ↗
19. Additives for cycle life improvement of high-voltage LNMO-based Li-ion cells10.1002/celc.201901120 ↗
20. Stabilizing the cathode interphase of LNMO using an ionic-liquid based electrolyte
21. Beneficial influence of succinic anhydride as electrolyte additive on the self-discharge of 5 v LiNi0.4Mn1.6O4 cathodes10.1016/j.jpowsour.2013.02.030 ↗
22. Recent advances in the electrolytes for interfacial stability of high-voltage cathodes in lithium-ion batteries10.1039/C4RA11575A ↗
23. Advances in modification methods and the future prospects of high-voltage spinel LiNi0.5Mn1.5O4 — a review10.1039/D3TA01777J ↗
24. Lithium-ion batteries for sustainable energy storage: recent advances towards new cell configurations10.1039/C7GC01328K ↗
25. Water-based electrode manufacturing and direct recycling of lithium-ion battery electrodes—a green and sustainable manufacturing system
26. In situ formation of lithium polyacrylate binder for aqueous manufacturing and recycling of Ni-rich cathodes10.1149/1945-7111/ac7171 ↗
27. Repeated dose toxicity study (28 days) in rats and mice with N- methylpyrrolidone (NMP)10.3109/01480549709011079 ↗
28. Toxicity of N-methyl-2-pyrrolidone (NMP): teratogenic, subchronic, and two-year inhalation studies10.1093/toxsci/9.2.222 ↗
29. Applying established water-based binders to aqueous processing of LiNi 0.83 Co 0.12 Mn 0.05 O 2 positive electrodes10.1149/1945-7111/ac2861 ↗
30. Complementary strategies toward the aqueous processing of high-voltage LiNi0.5Mn1.5O4lithium-ion cathodes10.1002/cssc.201702021 ↗
31. Understanding the role of water-soluble guar gum binder in reducing capacity fading and voltage decay of Li-rich cathode for Li-ion batteries10.1016/j.electacta.2020.136401 ↗
32. Suppressing the voltage-fading of layered lithium-rich cathode materials via an aqueous binder for Li-ion batteries10.1039/C5CC10534J ↗
33. Co-crosslinked water-soluble biopolymers as a binder for high-voltage LiNi0.5Mn1.5O4|Graphite lithium-ion full cells10.1002/cssc.201903483 ↗
34. Cross-linked chitosan as a polymer network binder for an antimony anode in sodium-ion batteries10.1002/aenm.201502130 ↗
35. Deriving structure‐performance relations of chemically modified chitosan binders for sustainable high‐voltage LiNi 0.5 Mn 1.5 O 4 cathodes10.1002/batt.201900140 ↗
36. Sodium alginate: a water-processable binder in high-voltage cathode formulations10.1149/2.0281701jes ↗
37. Improved cycle lives of LiMn2O4 cathodes in lithium ion batteries by an alginate biopolymer from seaweed10.1039/c3ta13514d ↗
38. Alternative binders for sustainable electrochemical energy storage-the transition to aqueous electrode processing and bio-derived polymers10.1039/C8EE00640G ↗
39. Performance of LiNi1/3Mn1/3Co1/3O 2/graphite batteries based on aqueous binder10.1016/j.jpowsour.2013.10.018 ↗
40. Carrageenan as an ecological alternative of polyvinylidene difluoride binder for li-s batteries10.3390/ma14195578 ↗
41. Lambda carrageenan as a water-soluble binder for silicon anodes in lithium-ion batteries10.1021/acssuschemeng.2c03313 ↗
42. Carrageenans as sustainable water-processable binders for high-voltage NMC811 cathodes10.1021/acsaem.3c01662 ↗
43. Carrageenan: a review10.17221/6758-VETMED ↗
44. Effects of small amounts of kappa-carrageenan on the rheology of aqueous iota-carrageenan10.1016/0144-8617(92)90064-W ↗
45. J. Doyle, P. Giannouli, K. Philip, E.R. Morris, Effect Ca2+ Cations on Gealtion of K-Carrageenan, Rheol. Asp. (n.d.).
46. Cycling stability of lithium-ion batteries based on Fe–Ti-doped LiNi0.5Mn1.5O4 cathodes, graphite anodes, and the cathode-additive Li3PO410.1002/advs.202301874 ↗
47. Surface modification of LiNi0.8Co0.15Al0.05O2 particles via Li3PO4 coating to enable aqueous electrode processing10.1002/cssc.202001907 ↗
48. MnPO4-Coated Li(Ni0.4Co0.2Mn0.4)O2 for lithium(-ion) batteries with outstanding cycling stability and enhanced lithiation kinetics
49. Measuring the coating adhesion strength of electrodes for lithium-ion batteries10.1016/j.ijadhadh.2015.03.002 ↗
50. Gelling power alteration on kappa-carrageenan dispersion through esterification method with different fatty acid saturation10.3390/gels8110752 ↗
51. Prospects for reducing the processing cost of lithium ion batteries10.1016/j.jpowsour.2014.11.019 ↗
52. The success story of graphite as a lithium-ion anode material-fundamentals, remaining challenges, and recent developments including silicon (oxide) composites10.1039/D0SE00175A ↗
53. Challenges and approaches for high-voltage spinel lithium-ion batteries10.1002/cphc.201400052 ↗
54. Developing high-voltage spinel LiNi 0.5 Mn 1.5 O 4 cathodes for high-energy-density lithium-ion batteries: current achievements and future prospects10.1039/D0TA02812F ↗
55. Graphite//LiNi0.5Mn1.5O4 cells based on environmentally friendly made-in-water electrodes10.1002/cssc.201601249 ↗
56. An electrolyte additive for the improved high voltage performance of LiNi0.5Mn1.5O4 (LNMO) cathodes in Li-ion batteries10.1039/D2TA09930F ↗
57. A practical beginner's guide to cyclic voltammetry10.1021/acs.jchemed.7b00361 ↗
58. Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell10.1149/2.057207jes ↗
59. The electrode tortuosity factor: why the conventional tortuosity factor is not well suited for quantifying transport in porous Li-ion battery electrodes and what to use instead10.1038/s41524-020-00386-4 ↗
60. Design, properties, and manufacturing of cylindrical Li-ion battery cells—a generic overview10.3390/batteries9060309 ↗
61. From materials to cell: state-of-the-art and prospective technologies for lithium-ion battery electrode processing10.1021/acs.chemrev.1c00565 ↗
62. Influence of convective drying parameters on electrode performance and physical electrode properties10.1149/MA2014-02/5/328 ↗
63. Investigation of binder distribution in graphite anodes for lithium-ion batteries10.1016/j.jpowsour.2016.11.051 ↗
64. Critical electrode properties and drying conditions causing component segregation in graphitic anodes for lithium-ion batteries10.1016/j.est.2018.06.009 ↗
65. Structural and electrochemical properties of calendered lithium manganese oxide cathodes10.1002/ente.201600130 ↗
66. Calendering of silicon-containing electrodes and their influence on the mechanical and electrochemical properties10.3390/batteries8050046 ↗
67. The influence of calendering on the fast charging performance and lithium plating of hard carbon blend anodes
68. Enabling aqueous processing for crack-free thick electrodes10.1016/j.jpowsour.2017.04.030 ↗