journal article·2024-02Open access

On the measurement of the electrical conductivity of graphite-polymer composite bipolar plates

Terence E. Warner, Thomas Graf

Abstract

We argue that the collinear 4-point probe is unsuitable for measuring in-plane and through-plane electrical conductivity of graphite-polymer composite plates , and strongly recommend the 4-wire Kelvin measurement system with parallel block electrodes. Regarding the latter, we report the effect of applied pressure on the cell resistance and determine the offset resistance in the measurement system at 69 bar by extrapolating the cell resistance for a series of graphite monoliths of different thicknesses to zero thickness. We show that the fringe field effect increases the conductance of the cell, and ipso facto the conductance of the sample plate, when the cross-sectional area of the sample plate exceeds that of the block electrodes. An evaluation of the measurement uncertainty of the through-plane electrical conductivity , shows that the uncertainty of the through-plane resistance of the two gas diffusion layers (carbon fibre mat) and their interfacial contact resistance with the sample and electrodes whilst under compression (collectively referred to here as the ‘offset resistance’) is the major contributor. This article complements the US Fuel Cell Council's protocol 05-160 and the Keithley White Paper (No. 2399) in establishing an effective measurement procedure to enable a more reliable comparison of conductivity data.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Electrical resistivity measurements of polymer materials10.1016/0142-9418(84)90012-6 ↗
2. Valdes · 1954 · vol. 42 · 420
3. Measurement of sheet resistivities with the four-point probe10.1002/j.1538-7305.1958.tb03883.x ↗
4. A method of measuring specific resistivity and Hall effect of discs of arbitrary shape
5. An alternative approach to the calculation of four-probe resistances on nonuniform structure10.1149/1.2113598 ↗
6. The 100th anniversary of the four-point probe technique: the role of probe geometries in isotropic and anisotropic systems10.1088/0953-8984/27/22/223201 ↗
7. Schroder · 2015 · 800
8. The potentials of infinite systems of sources and numerical solutions of problems in semiconductor engineering10.1002/j.1538-7305.1955.tb03765.x ↗
9. An algorithm for computing linear four-point probe thickness correction factors10.1063/1.1394186 ↗
10. An analysis of the imperfections and defects inside composite bipolar plates using X-Ray computer tomography and resistivity simulations10.1016/j.ijhydene.2021.05.078 ↗
11. Pierson · 1994 · 419
12. Hong
13. Highly conductive epoxy/graphite composites for bipolar plates in proton exchange membrane fuel cells10.1016/j.jpowsour.2007.05.088 ↗
14. Swank · 2009 · 60
15. Electrochemical and mechanical behavior of carbon composite bipolar plate for fuel cell10.1016/j.ijhydene.2010.02.033 ↗
16. Effect of resin matrix precursor on the properties of graphite composite bipolar plate for PEM fuel cell10.1021/ef0603582 ↗
17. Ensinger GbmH
18. Graphite/epoxy composite for building Bipolar Plates10.1051/e3sconf/202233404010 ↗
19. Properties of epoxy/carbon black/graphite composites for bipolar plate in polymer electrolyte membrane fuel cell10.4028/www.scientific.net/AMR.911.8 ↗
20. Comparison of electrical conductivity data obtained by four-electrode and four-point probe methods for graphite-based polymer composites10.1016/j.polymertesting.2007.02.003 ↗
21. High performance polyvinylidene fluoride/graphite/multi-walled carbon nanotubes composite bipolar plate for PEMFC with segregated conductive networks10.1016/j.ijhydene.2021.05.081 ↗
22. Preparation and characterization of graphite/resin composite bipolar plates for polymer electrolyte membrane fuel cells10.1515/secm-2013-0306 ↗
23. Development of carbon composite bipolar plates for vanadium redox flow batteries10.5012/bkcs.2012.33.11.3589 ↗
24. Preparation and properties of carbon nanotube-reinforced vinyl ester/nanocomposite bipolar plates for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2007.10.064 ↗
25. Investigation of the properties of polymer composite bipolar plates in fuel cells
26. Electrical properties of carbon-based polypropylene composites for bipolar plates in polymer electrolyte membrane fuel cell (PEMFC)10.1016/j.jpowsour.2007.05.106 ↗
27. Proton Exchange Membrane Fuel Cell - Part 6: Test Method of Bipolar Plate Properties, National Standard of the People's Republic of China, GB/T 20042.6-2011 https://www.chinesestandard.net/PDF.aspx/GBT20042.6-2011.
28. Data from bridge technology and Lucas signatone corporation (https://four-point-probes.com) (https://signatone.com).
29. Graphite-epoxy composites for fuel-cell bipolar plates: wet vs dry mixing and role of the design of experiment in the optimization of molding parameters10.1016/j.ijhydene.2020.10.272 ↗
30. Landis · 2002 · 12
31. Polyethylene-carbon material for polymer electrolyte membrane fuel cell bipolar plates
32. Bipolar plate made of carbon fiber epoxy composite for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2008.05.088 ↗
33. Volume electrical conductivity measurement on organic composite material
34. Conductive polymer composites and coated metals ss alternative bipolar plate materials for all-vanadium redox-flow batteries10.5185/amlett.2014.amwc.1023 ↗
35. Resistance measurement of conductive thermoplastic bipolar plates for polymer electrolyte membrane fuel cells10.14416/j.ijast.2014.08.001 ↗
36. Electrical conductivity of carbon-filled polypropylene-based resins10.1002/app.29422 ↗
37. Pressure-independent through-plane electrical conductivity measurements of highly filled conductive polymer composites10.1016/j.ijhydene.2022.11.318 ↗
38. Effect of surface roughness of composite bipolar plates on the contact resistance of a proton exchange membrane fuel cell10.1016/j.jpowsour.2008.11.063 ↗
39. Injection moulded low cost bipolar plates for PEM fuel cells10.1016/j.jpowsour.2004.01.014 ↗
40. Highly conductive polypropylene-based composites for bipolar plates for polymer electrolyte membrane fuel cells10.1002/fuce.201900232 ↗
41. Effect of carbon fiber length and graphene on carbon-polymer composite bipolar plate for PEMF10.1007/s10008-014-2573-1 ↗
42. CNTs nanostructuring effect on the properties of graphite composite bipolar plate10.1016/j.ijhydene.2010.02.072 ↗
43. Bipolar plates made of plain weave carbon/epoxy composite for proton exchange membrane fuel cell10.1016/j.ijhydene.2011.11.125 ↗
44. A competitive design and material consideration for fabrication of polymer electrolyte membrane fuel cell bipolar plates
45. Direction dependent electrical conductivity of polymer/carbon filler composites10.3390/polym11040591 ↗
46. Pilinski
47. Evaluating current distribution and influence of defect sites for graphitic compound bipolar plate materials10.1002/fuce.201900138 ↗
48. Analytical modeling of contact resistance in organic transistors
49. A beginner's guide to uncertainty of measurement