journal article·2024-02Open access

A numerical analysis of the effect of layer-scale and microscopic parameters of membrane electrode assembly in proton exchange fuel cells under two-phase conditions

Pablo A. García-Salaberri, Arturo Sánchez-Ramos

Abstract

A multiphysics, multiphase, multiscale model of the membrane electrode assembly (MEA) of a polymer electrolyte membrane fuel cell (PEMFC) is presented. The model accounts for varying local effective transport properties that arise from assembly compression of the gas diffusion layer (GDL) and MEA microstructure, providing a more realistic description of heterogeneities. The model is validated against previous experimental data in terms of polarization curve, effect of inlet relative humidity on performance, and rib/channel saturation distribution. Then, a parametric analysis of layer-scale (compression and GDL thickness) and microscopic (pore radius and defect volume fraction) parameters is presented. The results show that performance can be improved by reducing compression under the rib (provided that electrical contact resistances are negligible), tailoring GDL thickness at intermediate values around 200μm, designing microporous layer (MPL) and catalyst layer (CL) with pore sizes between 50–100nm and 0.5–1μm, respectively, and reducing large defect volume fractions in MPLs and CLs. To achieve these goals, an integral design of MEAs is necessary to minimize electrical contact resistances, cracks and defects, reduce inhomogeneous compression and produce highly porous multiscale structures with large continuum pore sizes at multiple scales.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (95)

Show source-provided references
1. Fuel cell commercialization: The key to a hydrogen economy10.1016/j.jpowsour.2005.10.051 ↗
2. Perspective on the hydrogen economy as a pathway to reach net-zero CO2 emissions in Europe10.1039/D1EE02118D ↗
3. O’hayre · 2016
4. Chapter 4 - General aspects in the modeling of fuel cells: from conventional fuel cells to nano fuel cells10.1016/B978-0-323-85727-7.00015-1 ↗
5. Chapter 7 - Effective transport properties for fuel cells: modeling and experimental characterization10.1016/B978-0-323-99485-9.00011-3 ↗
6. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society10.1149/2.F03152if ↗
7. Work efficiency and economic efficiency of actual driving test of proton exchange membrane fuel cell forklift10.3390/molecules27154918 ↗
8. Design and manufacture of a high-temperature PEMFC and its cooling system to power a lightweight UAV for a high altitude mission10.1016/j.ijhydene.2015.12.209 ↗
9. Progress on open cathode proton exchange membrane fuel cell: Performance, designs, challenges and future directions10.1016/j.apenergy.2020.116359 ↗
10. A general-purpose tool for modeling multifunctional thin porous media (POREnet): From pore network to effective property tensors
11. Hydration and dehydration cycles in polymer electrolyte fuel cells operated with wet anode and dry cathode feed: A neutron imaging and modeling study10.1016/j.jpowsour.2017.03.155 ↗
12. Alternative architectures and materials for PEMFC gas diffusion layers: A review and outlook10.1016/j.rser.2022.112640 ↗
13. Review and analysis of PEM fuel cell design and manufacturing10.1016/S0378-7753(02)00542-6 ↗
14. The effect of membrane electrode assembly methods on the performance in fuel cells10.1016/j.electacta.2021.138676 ↗
15. Water transport in polymer electrolyte membrane fuel cells10.1016/j.pecs.2010.06.002 ↗
16. A review of the performance and analysis of proton exchange membrane fuel cell membrane electrode assemblies10.1016/j.jpowsour.2012.07.090 ↗
17. High voltage stability of nanostructured thin film catalysts for PEM fuel cells10.1016/j.jpowsour.2006.05.033 ↗
18. Nanostructured thin film electrocatalysts-current status and future potential10.1149/1.3635628 ↗
19. Nanostructured thin film electrocatalysts for PEM fuel cells-a tutorial on the fundamental characteristics and practical properties of NSTF catalysts10.1149/1.3701968 ↗
20. Effects of membrane electrode assembly components on proton exchange membrane fuel cell performance10.1016/j.ijhydene.2007.08.021 ↗
21. Effect of properties of hydrophilic microporous layer (MPL) on PEFC performance10.1149/2.0371706jes ↗
22. Enhanced water management of polymer electrolyte fuel cells with additive-containing microporous layers10.1021/acsaem.8b01059 ↗
23. Effect of hydrophilic treatment of microporous layer on fuel cell performance10.1149/1.3484604 ↗
24. Enhancing membrane electrode assembly performance by improving the porous structure and hydrophobicity of the cathode catalyst layer10.1016/j.jpowsour.2019.227284 ↗
25. Gas diffusion layer/flow-field unified membrane-electrode assembly in fuel cell using graphene foam10.1016/j.electacta.2019.134808 ↗
26. Effect of commercial gas diffusion layers on catalyst durability of polymer electrolyte fuel cells in varied cathode gas environment10.1002/smll.202201750 ↗
27. Catalyst aggregate size effect on the mass transport properties of non-noble metal catalyst layers for PEMFC cathodes10.1149/1945-7111/ace289 ↗
28. Multi-variable optimization of PEMFC cathodes using an agglomerate model10.1016/j.electacta.2007.04.028 ↗
29. Understanding water transport in polymer electrolyte fuel cells using coupled continuum and pore-network models10.1002/fuce.201500213 ↗
30. Investigation of temperature-driven water transport in polymer electrolyte fuel cell: phase-change-induced flow10.1149/1.3046136 ↗
31. Understanding impacts of catalyst-layer thickness on fuel-cell performance via mathematical modeling10.1149/2.1161607jes ↗
32. Modeling the effects of using gas diffusion layers with patterned wettability for advanced water management in proton exchange membrane fuel cells
33. Advanced water management in PEFCs: diffusion layers with patterned wettability III. Operando characterization with neutron imaging10.1149/2.0891613jes ↗
34. Analysis of the role of the microporous layer in improving polymer electrolyte fuel cell performance10.1016/j.electacta.2018.02.100 ↗
35. Modeling the effect of low pt loading cathode catalyst layer in polymer electrolyte fuel cells: Part i. model formulation and validation10.1149/1945-7111/ac4456 ↗
36. Modeling the effect of low pt loading cathode catalyst layer in polymer electrolyte fuel cells. part ii: Parametric analysis10.1149/1945-7111/ac811d ↗
37. On the optimal cathode catalyst layer for polymer electrolyte fuel cells: Bimodal pore size distributions with functionalized microstructures10.3389/fenrg.2022.1058913 ↗
38. Boosting the optimization of membrane electrode assembly in proton exchange membrane fuel cells guided by explainable artificial intelligence10.1016/j.egyai.2021.100098 ↗
39. Effectively increasing pt utilization efficiency of the membrane electrode assembly in proton exchange membrane fuel cells through multiparameter optimization guided by machine learning10.1021/acsami.1c23221 ↗
40. Optimization of cathode catalyst layer of membrane electrode assembly for polymer electrolyte fuel cells using machine learning10.1016/j.jpowsour.2023.233105 ↗
41. Modeling diffusion and convection in thin porous transport layers using a composite continuum-network model: Application to gas diffusion layers in polymer electrolyte fuel cells10.1016/j.ijheatmasstransfer.2020.120824 ↗
42. Effect of thickness and outlet area fraction of macroporous gas diffusion layers on oxygen transport resistance in water injection simulations
43. Physical degradation of membrane electrode assemblies undergoing freeze/thaw cycling: Diffusion media effects10.1016/j.jpowsour.2007.12.114 ↗
44. Soft X-ray visualization of the liquid water transport within the cracks of micro porous layer in PEMFC10.1016/j.elecom.2011.03.033 ↗
45. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography10.1016/j.elecom.2013.04.006 ↗
46. Y. Matsui, et al., Physical degradation of membrane electrode assemblies undergoing freeze/thaw cycling: Diffusion media effects, in: Proc. ASME 2013 11th Fuel Cell Science, 2013, pp. 1–5.
47. Impact of cracked gas diffusion layer on performance of polymer electrolyte membrane fuel cells10.1016/j.jiec.2020.08.014 ↗
48. Numerical study on the effect of microporous layer crack changes on water management in gas diffusion layer of proton exchange membrane fuel cell
49. Numerical simulation of liquid water transport in perforated cracks of microporous layer
50. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
51. Comparing predictions of PEM fuel cell behavior using Maxwell–Stefan and CFD approximation equations10.1016/j.compchemeng.2008.03.008 ↗
52. A comparison of Fick and Maxwell–Stefan diffusion formulations in PEMFC gas diffusion layers10.1007/s00231-016-1812-7 ↗
53. Two-phase flow dynamics at the interface between GDL and gas distributor channel using a pore-network model10.1007/s11242-022-01813-4 ↗
54. Transport in polymer-electrolyte membranes: I. Physical model10.1149/1.1580822 ↗
55. Subsecond morphological changes in nafion during water uptake detected by small-angle X-ray scattering10.1021/mz200015c ↗
56. Determination of the porosity and its heterogeneity of fuel cell microporous layers by X-ray tomographic microscopy10.1016/j.jpowsour.2022.231612 ↗
57. Heterogeneous through-plane porosity distributions for treated PEMFC GDLs. II. Effect of MPL cracks10.1149/1.3594636 ↗
58. Secanell · 2022
59. Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: Effect of through-plane saturation distribution10.1016/j.ijheatmasstransfer.2015.02.073 ↗
60. Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: Effect of local saturation and application to macroscopic continuum models10.1016/j.jpowsour.2015.07.034 ↗
61. Thermal conductivity of microporous layers: Analytical modeling and experimental validation10.1016/j.jpowsour.2015.07.054 ↗
62. Characterization of the PEM fuel cell catalyst layer microstructure by nonlinear least-squares parameter estimation10.1149/2.041205jes ↗
63. Quasi-3D modeling of water transport in polymer electrolyte fuel cells10.1149/1.1611489 ↗
64. Modeling the interplay between water capillary transport and species diffusion in gas diffusion layers of proton exchange fuel cells using a hybrid computational fluid dynamics formulation10.1016/j.jpowsour.2021.230735 ↗
65. Implications of inherent inhomogeneities in thin carbon fiber-based gas diffusion layers: A comparative modeling study10.1016/j.electacta.2018.09.089 ↗
66. Gas-diffusion-layer structural properties under compression via X-ray tomography10.1016/j.jpowsour.2016.08.020 ↗
67. Random pore network modeling of fibrous PEMFC gas diffusion media using voronoi and delaunay tessellations10.1149/2.009308jes ↗
68. Water uptake of fuel-cell catalyst layers10.1149/2.031209jes ↗
69. Modeling of the anode of a liquid-feed DMFC: Inhomogeneous compression effects and two-phase transport phenomena10.1016/j.jpowsour.2013.06.166 ↗
70. P. Sun, Y. Wang, A new formulation and an efficient numerical technique for a nonisothermal, anisotropic, two-phase transport model of pemfc, in: International Conference on Fuel Cell Science, Engineering and Technology, 44045, 2010, pp. 561–572.10.1115/FuelCell2010-33152 ↗
71. A Dirichlet/Robin iteration-by-subdomain method for an anisotropic, nonisothermal two-phase transport model of PEM fuel cell with micro-porous layer10.1016/j.cam.2014.01.014 ↗
72. A simple direct estimation of temperature-dependent thermal conductivity with Kirchhoff transformation10.1016/S0735-1933(01)00257-3 ↗
73. Multi-phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field10.1002/er.4215 ↗
74. A comprehensive three-dimensional model coupling channel multi-phase flow and electrochemical reactions in proton exchange membrane fuel cell10.1016/j.adapen.2021.100033 ↗
75. Modeling two-phase flow in PEM fuel cell channels10.1016/j.jpowsour.2008.01.047 ↗
76. Free open reference implementation of a two-phase PEM fuel cell model10.1016/j.cpc.2018.07.023 ↗
77. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
78. Operando properties of gas diffusion layers: saturation and liquid permeability10.1149/2.0881702jes ↗
79. Analysis of representative elementary volume and through-plane regional characteristics of carbon-fiber papers: diffusivity, permeability and electrical/thermal conductivity10.1016/j.ijheatmasstransfer.2018.07.030 ↗
80. On the modeling of water transport in polymer electrolyte membrane fuel cells10.1016/j.electacta.2009.06.070 ↗
81. Phase change in a polymer electrolyte fuel cell10.1149/1.3115470 ↗
82. Liquid water in cathode gas diffusion layers of PEM fuel cells: Identification of various pore filling regimes from pore network simulations10.1016/j.ijheatmasstransfer.2018.10.004 ↗
83. Liquid water transport in gas diffusion layer of polymer electrolyte fuel cells10.1149/1.1646148 ↗
84. Elucidating differences between carbon paper and carbon cloth in polymer electrolyte fuel cells10.1016/j.electacta.2006.11.012 ↗
85. Predicting water and current distributions in a commercial-size PEMFC10.1016/j.jpowsour.2004.03.059 ↗
86. On the effects of assembly compression on the performance of liquid-feed DMFCs under methanol-limiting conditions: A 2D numerical study10.1016/j.jpowsour.2015.02.112 ↗
87. Modelling the effect of inhomogeneous compression of GDL on local transport phenomena in a PEM fuel cell10.1002/fuce.200700058 ↗
88. Nonlinear orthotropic model of the inhomogeneous assembly compression of PEM fuel cell gas diffusion layers10.1016/j.ijhydene.2011.05.152 ↗
89. R. Borup, A.Z. Weber, Fc135: Fc-pad: fuel cell performance and durability consortium, in: Annual Merit Review Proceedings, Washington DC, April, vol. 30, 2019.10.2172/1505949 ↗
90. Minimizing mass-transport loss in proton exchange membrane fuel cell by freeze-drying of cathode catalyst layers10.1016/j.jpowsour.2019.04.094 ↗
91. Electrospray deposition: a breakthrough technique for proton exchange membrane fuel cell catalyst layer fabrication10.1021/acsaem.1c01445 ↗
92. Insights on designing non-PGM catalyst layers at low humidity10.1016/j.jpowsour.2023.232741 ↗
93. Improving water management in fuel cells through microporous layer modifications: Fast operando tomographic imaging of liquid water10.1016/j.jpowsour.2019.226809 ↗
94. Influence of the gas diffusion layer compression on the oxygen transport in PEM fuel cells at high water saturation levels10.1149/2.0691706jes ↗
95. 3D printing of next-generation electrochemical energy storage devices: from multiscale to multimaterial10.1002/eem2.12175 ↗