journal article·2024-01

Experimental study and first-principles calculation of enhanced electrochemical properties of Bi0.7Sr0.3FeO3-δ (BSFO) – La0.8Sr0.2MnO3-δ (LSM) composite cathodes for intermediate-temperature solid oxide fuel cells

Zhiyuan Li, Tong Wu, Zhenhao Zhang, Haibin Sun, Xue Guo, Qiangqiang Hu, Yurun Feng

Publisher page

Abstract

In order to enhance the electrochemical performance of cobalt-free Bi 0.7Sr 0.3FeO 3-δ (BSFO) cathodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs), a composite cathode consisting of BSFO and La 0.8Sr 0.2MnO 3-δ (LSM) is developed. The optimized polarization resistance of the composite cathode (0.11 Ω cm 2 at 800 °C) is found to be only 61 % that of pure BSFO (0.18 Ω cm 2 at 800 °C), indicating a significant improvement in performance. The first-principles calculation indicates that the enhanced electrochemical performance is mainly due to the domain of low oxygen vacancy formation energies of BSFO-LSM-L interfaces ( E vac , −3.63 eV) and LSM ( E vac , −3.11 eV). The anode-supported single cell of NiO-SDC/SDC/BSFO-LSM shows a peak power density of 825.83 mW cm −2 at 800 °C using wet H 2 (∼3 vol% H 2O) as fuels and ambient air as oxidants. In addition, the single cell exhibits a good stability at the electric current density 400 mA cm −2 for 50 h measured at 650 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. The dynamic nexus of fossil energy consumption, temperature and carbon emissions: evidence from simultaneous equation model10.3390/ijerph20032042 ↗
2. Special issue “emerging materials and fabrication methods for solid oxide fuel cells (SOFCs)”10.3390/en15093182 ↗
3. Composite cathodes for protonic ceramic fuel cells: rationales and materials10.1016/j.compositesb.2022.109881 ↗
4. Synthesis and characterization of Bi1-xSrxFeO3-δ(BSFO) nanofibers as cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.ijhydene.2020.07.152 ↗
5. Engineering solid oxide fuel cell electrode microstructure by a micro-modeling tool based on estimation of TPB length10.1016/j.ijhydene.2021.01.165 ↗
6. SOFC cathode/YSZ — non-stationary TPB effects10.1016/j.ssi.2008.01.059 ↗
7. In-situ patterned intra-anode triple phase boundary in SOFC electroless anode: an enhancement of electrochemical performance10.1016/j.ijhydene.2011.03.114 ↗
8. Modelling the effects of measured anode triple-phase boundary densities on the performance of micro-tubular hollow fiber SOFCs10.1016/j.ssi.2009.10.013 ↗
9. Modelling the triple phase boundary length in infiltrated SOFC electrodes10.1016/j.ijhydene.2017.10.004 ↗
10. Self-assembled dynamic perovskite composite cathodes for intermediate temperature solid oxide fuel cells10.1038/nenergy.2016.214 ↗
11. Electrochemical characteristics of limiting current sensors with LSM-YSZ and LSM-CGO-YSZ composite electrodes10.1016/j.ceramint.2023.03.285 ↗
12. LSM-SDC electrodes fabricated with an ion-impregnating process for SOFCs with doped ceria electrolytes10.1016/j.ssi.2006.01.043 ↗
13. Optimisation of composite cathodes for intermediate temperature SOFC applications10.1016/S0167-2738(99)00108-3 ↗
14. Characterization of Ba1.0Sr1.0FeO4+δ cathode on La0.9Sr0.1Ga0.8Mg0.2O3−δ electrolyte for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2011.03.019 ↗
15. Evaluation of La0.8Sr0.2MnO3 perovskite prepared by fast solution combustion10.1016/j.ceramint.2022.08.105 ↗
16. First principles study on the oxygen reduction reaction of the La1–xSrxMnO3–δ coated Ba1–xSrxCo1–yFeyO3–δ cathode for solid oxide fuel cells10.1016/j.ijhydene.2019.04.271 ↗
17. A high-entropy spinel ceramic oxide as the cathode for proton-conducting solid oxide fuel cells10.1007/s40145-022-0573-7 ↗
18. Tailoring cations in a perovskite cathode for proton-conducting solid oxide fuel cells with high performance10.1039/C9TA05300J ↗
19. Anode-supported solid oxide fuel cells based on Sm0.2Ce0.8O1.9 electrolyte fabricated by a phase-inversion and drop-coating process10.1016/j.ijhydene.2016.03.166 ↗
20. Electrochemical impedance spectroscopic characterization of impregnated La0.6Sr0.4Co0.2Fe0.8O3−δ cathode for intermediate-temperature SOFCs10.1016/j.ijhydene.2018.03.223 ↗
21. An elementary kinetic model for the LSCF and LSCF-CGO electrodes of solid oxide cells: impact of operating conditions and degradation on the electrode response10.1149/1945-7111/abf40a ↗
22. An improved oxygen reduction reaction activity and CO2-tolerance of La0.6Sr0.4Co0.2Fe0.8O3-δ achieved by a surface modification with barium cobaltite coatings10.1016/j.jpowsour.2021.230573 ↗
23. Kinetics of oxygen reaction in porous La0.6Sr0.4Co0.2Fe0.8O3–δ-Ce0.8Gd0.2O1.9 composite electrodes for solid oxide cells10.1016/j.ijhydene.2021.05.071 ↗
24. Microstructure and cathodic performance of La0.9Sr0.1MnO3/yttria-stabilized zirconia composite electrodes10.1016/S0013-4686(00)00666-6 ↗
25. Medium-Entropy perovskites Sr (FeαTiβCoγMnζ) O3-δ as promising cathodes for intermediate temperature solid oxide fuel cell10.1016/j.apcatb.2021.120264 ↗
26. A kinetic study of oxygen reduction reaction on La2NiO4 cathodes by means of impedance spectroscopy10.1016/j.jelechem.2007.08.006 ↗
27. Effect of oxygen vacancies on the photocatalytic CO2 reduction performance of Bi2WO6: DFT and experimental studies10.1016/j.apsusc.2021.152135 ↗
28. Water-oxygen interaction on marcasite (101) surface: DFT calculation10.1016/j.ijmst.2021.11.012 ↗
29. The effect of oxygen transfer mechanism on the cathode performance based on proton-conducting solid oxide fuel cells10.1039/C4TA04397A ↗
30. Composite (La, Sr) MnO3–YSZ cathode for SOFC10.1016/j.ssi.2005.12.016 ↗
31. Pr2NiO4-Pr0.2Ce0.8O1.9 composite cathode as a potential cathode material for intermediate temperature solid oxide fuel cells10.1016/j.solidstatesciences.2019.106108 ↗
32. Review of composite cathodes for intermediate-temperature solid oxide fuel cell applications - ScienceDirect10.1016/j.ceramint.2020.06.176 ↗