Boosted Li+ migration in LiPON electrolyte via introducing Ti-based bridge for solid-state thin film batteries
Source abstract
Abstract
Lithium phosphorous oxynitride (LiPON) has become a research hotspot in the application of all solid-state thin film batteries (TFBs). Meanwhile, the electrochemical stability and Li-ion conductivity of LiPON solid electrolyte films are the critical factors for TFBs with high energy density. In this work, we demonstrate the preparation of Ti-doped LiPON electrolyte (Ti–LiPON) with the enhanced stability and ionic conductivity via a multi-target co-sputtering method. The obtained Ti–LiPON electrolyte shows a larger electrochemical stability window (>5.5 V) and a higher ionic conductivity of 4.91✕10 −6 S cm −1. Moreover, the solid-state LiCoO 2/Ti–LiPON/Ni film battery (TFB) has been successfully assembled and exhibits a large specific capacity (77.08 mAh g −1 at 8 μA) and good cycle performance (67.44% of capacity maintained after 50 cycles). Meanwhile, the LED indicator can be able to light up by the LiCoO 2/Ti–LiPON/Ni TFB and further confirm its great potential for practical applications. Based on the different d-orbital electronic structure of Ti, the local electron density of LiPON system obtains a great change. The existence of Ti can act as a network former in LiPON electrolyte and construct multiple Li + transport paths with the different bridge bonding forms, further promoting the migration of Li +. Moreover, the introduced Ti can also weaken the electrostatic constraint between PO 3N 4 − and Li + and further provide a low Li + migration barrier center.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Inorganic Chemistry and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Designing solid-state electrolytes for safe, energy-dense batteries10.1038/s41578-019-0165-5 ↗
2. Fabrication and characterization of amorphous lithium electrolyte thin films and rechargeable thin-film batteries10.1016/0378-7753(93)80106-Y ↗
3. High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes10.1038/s41560-018-0312-z ↗
4. Revisiting the LiPON/Li thin film as a bifunctional interlayer for NASICON solid electrolyte-based lithium metal batteries10.1016/j.apsusc.2022.152790 ↗
5. Recent advances of composite electrolytes for solid-state Li batteries10.1016/j.jechem.2021.10.038 ↗
6. Electrical properties of amorphous lithium electrolyte thin films10.1016/0167-2738(92)90442-R ↗
7. Artificial solid electrolyte interphase to address the electrochemical degradation of silicon electrodes10.1021/am5009419 ↗
8. An ultrathin solid-state electrolyte film coated on LiNi0.8Co0.1Mn0.1O2 electrode surface for enhanced performance of lithium-ion batteries10.1016/j.ensm.2021.11.017 ↗
9. Resolving the amorphous structure of lithium phosphorus oxynitride (Lipon)10.1021/jacs.8b05192 ↗
10. Electrochemical properties of LiPON films made from a mixed powder target of Li3PO4 and Li2O10.1016/j.tsf.2011.08.107 ↗
11. Charge/discharge reactions via LiPON/Multilayer-Graphene interfaces without Li+ desolvation/solvation processes10.1021/acsaem.1c00628 ↗
12. Role of the chemical composition and structure on the electrical properties of a solid-state electrolyte: case of a highly conductive LiPON10.1016/j.electacta.2017.11.021 ↗
13. Influence of process conditions on structural and electrochemical properties of lithium phosphorus oxynitride thin films10.1016/j.ceramint.2020.05.251 ↗
14. Investigation of the local structure of LiPON thin films to better understand the role of nitrogen on their performance10.1016/j.ssi.2011.01.006 ↗
15. LiPON thin films with high nitrogen content for application in lithium batteries and electrochromic devices prepared by RF magnetron sputtering10.1016/j.ssi.2015.09.022 ↗
16. Fast Li+ migration in LiPON electrolytes doped by multi-valent Fe ions10.1016/j.jechem.2022.08.044 ↗
17. The mixed former effect in lithium borophosphate oxynitride thin film electrolytes for all-solid-state micro-batteries10.1016/j.electacta.2013.08.053 ↗
18. A new carbon-incorporated lithium phosphate solid electrolyte10.1016/j.jpowsour.2021.230603 ↗
19. Plasma properties during magnetron sputtering of lithium phosphorous oxynitride thin films10.1016/j.jpowsour.2014.09.174 ↗
20. The influence of sputter conditions on the properties of LiPON and its interfaces10.1016/j.jpowsour.2018.05.023 ↗
21. Status and prospect of garnet/polymer solid composite electrolytes for all-solid-state lithium batteries10.1016/j.jechem.2020.03.017 ↗
22. Electrochemical properties and optical transmission of high Li+ conducting LiSiPON electrolyte films10.1002/pssb.201600088 ↗
23. Ionic conductivity of bias sputtered lithium phosphorus oxy-nitride thin films10.1016/j.ssi.2016.01.046 ↗
24. Investigation of the local structure of LiPON thin films to better understand the role of nitrogen on their performance10.1016/j.ssi.2011.01.006 ↗
25. Chemical/morphological transition behavior of lithium phosphorus oxynitride solid-electrolyte in air: an analytical approach based on X-ray photoelectron spectroscopy and atomic force microscopy10.1016/j.jpowsour.2018.07.081 ↗
26. Solid electrolytes for Li-S batteries: solid solutions of poly(ethylene oxide) with LixPON- and LixSiPON-based polymers10.1021/acsami.0c06196 ↗
27. Altering the reaction mechanism to eliminate the shuttle effect in lithium-sulfur batteries10.1016/j.ensm.2020.01.002 ↗
28. Investigation of incorporating oxygen into TiN coating to resist high potential effects on PEMFC bipolar plates in vehicle applications10.1016/j.ijhydene.2020.06.059 ↗
29. Corrosion resistance and antibacterial activity of Ti-N-O coatings deposited on dental titanium alloy10.1016/j.surfcoat.2021.127296 ↗
30. Direct ink writing of Li1.3Al0.3Ti1.7(PO4)3-based solid-state electrolytes with customized shapes and remarkable electrochemical behaviors
31. Al and Ta co-doped LLZO as active filler with enhanced Li+ conductivity for PVDF-HFP composite solid-state electrolyte10.1088/1361-6528/acb3cb ↗
32. Enhancement of Mn-doped LiPON electrolyte for higher performance of all-solid-state thin film lithium battery
33. All inorganic thin film electrochromic device using LiPON as the ion conductor10.1016/j.solmat.2015.06.052 ↗