journal article·2023-10Open access

Operando investigations of proton exchange membrane fuel cells performance during air interruptions in dry and humidified conditions

Ivan Pivac, Quentin Meyer, Chuan Zhao, Frano Barbir

Abstract

Activating proton exchange membrane fuel cells is crucial to systematically build proton conductive pathways, remove contaminants from the electrode surface and obtain the highest performances, with air interruption emerging as one of the most powerful methods. While this approach enables fast activation and considerable recovery after extended periods of shutdown or operation, the impact of relative humidity on this process has not been explored. Herein, the impact of the relative humidity on the air interruption is investigated using an array of operando methods such as polarization, electrochemical impedance spectroscopy, and high-resolution localized current and mapping. It is found that while air interruptions in humidified conditions can improve performance, they rapidly reduce them in dry conditions. Specifically, air interruptions in fully humidified conditions improve ions, charges, and gas diffusion to the active sites, which may be attributed to the removal of platinum oxides increasing active site availability. However, air interruptions under low relative humidity rapidly reduce the cell voltage by increasing charge transfer and mass transport limitations, while causing extensive overheating as the cell is starved of oxygen and hydrogen might be generated. Overall, this work reveals the potential, yet limitations of air interruptions in operando hydrogen fuel cells.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. A novel high current pulse activation method for proton exchange membrane fuel cell10.1063/5.0046879 ↗
2. Activation mechanisms in the catalyst coated membrane of PEM fuel cells10.1016/j.pecs.2021.100924 ↗
3. Disclosure of the internal mechanism during activating a proton exchange membrane fuel cell based on the three-step activation method10.1016/j.ijhydene.2020.04.280 ↗
4. The analysis on the activation procedure of polymer electrolyte fuel cells10.33961/JECST.2011.2.3.131 ↗
5. Activation of polymer electrolyte membrane fuel cells: mechanisms, procedures, and evaluation10.1016/j.ijhydene.2022.05.228 ↗
6. Quick and effective activation of proton-exchange membrane fuel cells10.1016/S0378-7753(02)00587-6 ↗
7. Combined activation methods for proton-exchange membrane fuel cells10.1016/j.jpowsour.2005.05.072 ↗
8. A review of accelerated conditioning for a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2011.06.098 ↗
9. Initial conditioning of polymer electrolyte membrane fuel cell by temperature and potential cycling10.17344/acsi.2014.730 ↗
10. Advances in rapid and effective break-in/conditioning/recovery of automotive PEMFC stacks
11. Impact of shutdown procedures on recovery phenomena of proton exchange membrane fuel cells10.1002/fuce.201900174 ↗
12. Recoverable performance loss due to membrane chemical degradation in PEM fuel cells10.1149/2.063207jes ↗
13. Proton exchange membrane fuel cell reversible performance loss induced by carbon monoxide produced during operation10.1016/j.jpowsour.2016.05.113 ↗
14. Recovery mechanisms in proton exchange membrane fuel cells after accelerated stress tests10.1016/j.jpowsour.2015.07.063 ↗
15. The recovery mechanism of proton exchange membrane fuel cell in micro-current operation10.1016/j.apenergy.2018.05.100 ↗
16. Investigation of the reversible performance degradation mechanism of the PEMFC stack during long-term durability test10.1016/j.energy.2022.124747 ↗
17. Recoverable cathode performance loss in direct methanol fuel cells10.1149/1.2136073 ↗
18. Review on mechanisms and recovery procedures for reversible performance losses in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2020.229375 ↗
19. Cathode starvation as an accelerated conditioning procedure for perfluorosulfonic acid ionomer fuel cells10.1016/j.powera.2020.100012 ↗
20. Method of operating a fuel cell system in standy/regenerative mode
21. Gould · 2011 · vol. 382
22. Surface-oxide growth at platinum electrodes in aqueous H2SO4: reexamination of its mechanism through combined cyclic-voltammetry, electrochemical quartz-crystal nanobalance, and Auger electron spectroscopy measurements
23. Investigation of platinum oxidation in PEM fuel cells at various relative humidities10.1149/1.2372230 ↗
24. Effect of platinum dispersity, platinum loading and Pt-Oxide coverage on oxygen reduction reaction in PEMFC-Cathode10.1016/j.jelechem.2021.115414 ↗
25. The influence of platinum surface oxidation on the performance of a polymer electrolyte membrane fuel cell—probing changes of catalytically active surface sites on a polycrystalline platinum electrode for the oxygen reduction reaction10.1002/elsa.202100049 ↗
26. How platinum oxide affects the degradation analysis of PEM fuel cell cathodes10.1016/j.ijhydene.2021.01.058 ↗
27. Modeling platinum oxide growth of PEMFC cathode catalyst10.1149/06917.0273ecst ↗
28. Evaluation of reversible and irreversible degradation rates of polymer electrolyte membrane fuel cells tested in automotive conditions10.1016/j.jpowsour.2016.07.049 ↗
29. Investigation of the recoverable degradation of PEM fuel cell operated under drive cycle and different humidities10.1016/j.ijhydene.2014.02.023 ↗
30. Mechanistic principles of platinum oxide formation and reduction10.1007/s12678-014-0189-y ↗
31. Surface oxidation and reduction of platinum electrodes: coverage, kinetic and hysteresis studies10.1139/v68-149 ↗
32. T. Jahnke, A. Baricci, C. Rabissi, A. Casalegno, Physical modeling of catalyst degradation in low temperature fuel cells: platinum oxidation, dissolution, particle growth and platinum band formation, J. Electrochem. Soc. 167 (14) (2020) 149001, doi:10.1149/1945-7111/abbfda.10.1149/1945-7111/abbfda ↗
33. Oxide Formation and Removal on Pt Surfaces Under Potential Cycled Conditions10.1149/1.3210609 ↗
34. Air starvation of proton exchange membrane fuel cells and its beneficial effects on performance10.1016/j.apenergy.2022.119626 ↗
35. Hydrogen emission characterization for proton exchange membrane fuel cell during oxygen starvation – Part 1: Low oxygen concentration10.1016/j.ijhydene.2016.01.057 ↗
36. Experimental analysis of recoverable performance loss induced by platinum oxide formation at the polymer electrolyte membrane fuel cell cathode10.1016/j.jpowsour.2020.227990 ↗
37. Elucidation of performance recovery for Fe-based catalyst cathodes in fuel cells10.1002/aesr.202100123 ↗
38. Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228361 ↗
39. Quantification of effects of performance recovery procedures for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2021.230467 ↗
40. In Situ and Operando Characterization of Proton Exchange Membrane Fuel Cells10.1002/adma.201901900 ↗
41. Current Distribution Mapping for PEMFCs10.1016/j.electacta.2015.06.081 ↗
42. What Happens Inside a Fuel Cell? Developing an Experimental Functional Map of Fuel Cell Performance10.1002/cphc.201000487 ↗
43. Combined current and temperature mapping in an air-cooled, open-cathode polymer electrolyte fuel cell under steady-state and dynamic conditions10.1016/j.jpowsour.2015.07.069 ↗
44. Measurement of platinum oxide coverage in a proton exchange membrane fuel cell10.1149/1.3257595 ↗
45. A segmented microstructured flow field approach for submillimeter resolved local current measurement in channel and land areas of a PEFC10.1149/1.3274228 ↗
46. Current mapping of a proton exchange membrane fuel cell with a segmented current collector during the gas starvation and shutdown processes10.1016/j.ijhydene.2012.07.023 ↗
47. Analysis of electrochemical impedance spectroscopy data using the distribution of relaxation times: a Bayesian and hierarchical Bayesian approach10.1016/j.electacta.2015.03.123 ↗
48. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
49. Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times10.1016/j.jpowsour.2018.09.004 ↗
50. Solutions of ill-posed problems10.1137/1021044 ↗
51. Considering new regularization parameter-choice techniques for the Tikhonov method to improve the accuracy of electrocardiographic imaging10.3389/fphys.2019.00273 ↗
52. Maxim · 2023
53. Operando detection of oxygen reduction reaction kinetics of Fe–N–C catalysts in proton exchange membrane fuel cells10.1016/j.jpowsour.2022.231058 ↗
54. EIS equivalent circuits
55. Advanced diagnosis based on temperature and current density distributions in a single PEMFC10.1016/j.ijhydene.2015.04.157 ↗
56. In situ mapping of electrode potential in a PEMFC10.1149/05801.1565ecst ↗
57. Implementation of different Fe–N–C catalysts in high temperature proton exchange membrane fuel cells – effect of catalyst and catalyst layer on performance10.1016/j.jpowsour.2022.231529 ↗
58. Investigation of water generation and accumulation in polymer electrolyte fuel cells using hydro-electrochemical impedance imaging10.1016/j.jpowsour.2019.01.003 ↗
59. Experimental investigation of reverse voltage phenomenon during galvanostatic start-up of a proton exchange membrane fuel cell10.1016/j.enconman.2022.115386 ↗