journal article·2023-10Open access

Effect of high aspect ratio additives on microstructural and mass transport properties of the microporous layer in a proton exchange membrane fuel cell

Shirin Mehrazi, Mrittunjoy Sarker, Po-Ya Abel Chuang

Abstract

Tuning up transport properties of the microporous layer is an effective way to enhance mass transport in a proton exchange membrane fuel cell. The incorporation of non-spherical conductive additives in the conventional microporous layer can modify its pore structure. In this study, 5, 20, and 50 wt.% of two high aspect ratio additives, multiwall carbon nanotube and graphene nanoplatelet, are mixed with the acetylene-black carbon to systematically study their impact on ink and the final diffusion media properties. Using a bottom-up approach, the rheological properties of the ink are correlated to the mass transport resistance in the diffusion media. The ink with additives exhibits rheological properties of a less compact microstructure with large agglomerates. Whereas, a more compact agglomerated network is observed from the ink with pure acetylene black carbon nanoparticles. Graphene nanoplatelet has a dominating effect on the surface quality of the microporous layers due to its two-dimensional structure. The test results show that the microstructure formed by the synergy of acetylene black and additives can enhance ohmic and mass transport performance. 20 wt.% of the additive loading is found to be optimal and multiwall carbon nanotube shows the best fuel cell performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Adoption of nano-materials for the micro-layer in gas diffusion layers of PEMFCs10.1016/j.jpowsour.2005.11.103 ↗
2. The interactive effect of heat and mass transport on water condensation in the gas diffusion layer of a proton exchange membrane fuel cell10.1016/j.jpowsour.2020.229121 ↗
3. Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2015.02.115 ↗
4. Gas diffusion layer for proton exchange membrane fuel cells-A review10.1016/j.jpowsour.2009.04.005 ↗
5. Optimal microporous layer for proton exchange membrane fuel cell10.1016/j.jpowsour.2010.03.041 ↗
6. Porosity-graded micro-porous layers for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2007.01.021 ↗
7. Micro-porous layer with composite carbon black for PEM fuel cells10.1016/j.electacta.2006.01.048 ↗
8. Development of a porosity-graded micro porous layer using thermal expandable graphite for proton exchange membrane fuel cells10.1016/j.renene.2013.02.025 ↗
9. Managing the Pore Morphologies of Microporous Layers for Polymer Electrolyte Fuel Cells with a Solvent-Free Coating Technique10.1021/acssuschemeng.1c02105 ↗
10. Enhancement of proton exchange membrane fuel cell performance by doping microporous layers of gas diffusion layers with multiwall carbon nanotubes10.1016/j.jpowsour.2012.07.078 ↗
11. Multiwall Carbon Nanotube-Based Microporous Layers for Polymer Electrolyte Membrane Fuel Cells10.1149/2.0861712jes ↗
12. Electrochemically Produced Graphene for Microporous Layers in Fuel Cells10.1002/cssc.201600351 ↗
13. Carbon nanotube sheet as a microporous layer for proton exchange membrane fuel cells10.1016/j.energy.2021.120459 ↗
14. Development of an optimal gas diffusion medium for polymer electrolyte membrane fuel cells and assessment of its degradation mechani10.1016/j.ijhydene.2015.05.100 ↗
15. Development of carbon nanotubes based gas diffusion layers by in situ chemical vapor deposition process for proton exchange membrane fuel cells10.1016/j.jpowsour.2009.03.022 ↗
16. Carbon nano-chain and carbon nano-fibers based gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2007.02.064 ↗
17. Detailed optimization of multiwall carbon nanotubes doped microporous layer in polymer electrolyte membrane fuel cells for enhanced performance
18. Enhanced Water Management of Polymer Electrolyte Fuel Cells with Additive-Containing Microporous Layers10.1021/acsaem.8b01059 ↗
19. Effect of Properties of Hydrophilic Microporous Layer (MPL) on PEFC Performance10.1149/2.0371706jes ↗
20. Enhanced performance of proton exchange membrane fuel cell by introducing nitrogen-doped CNTs in both catalyst layer and gas diffusion layer10.1016/j.electacta.2017.08.160 ↗
21. Novel Graphene Foam Microporous Layers for PEM Fuel Cells: Interfacial Characteristics and Comparative Performance10.1002/fuce.201500031 ↗
22. Assessment of graphene as an alternative microporous layer material for proton exchange membrane fuel cells10.1016/j.fuel.2017.11.109 ↗
23. Characterization of novel graphene-based microporous layers for Polymer Electrolyte Membrane Fuel Cells operating under low humidity and high temperature10.1016/j.ijhydene.2019.12.213 ↗
24. Graphene and reduced graphene oxide based microporous layers for high-performance proton-exchange membrane fuel cells under varied humidity operation10.1016/j.jpowsour.2019.03.048 ↗
25. A rheological approach to studying process-induced structural evolution of the microporous layer in a proton exchange membrane fuel cell10.1016/j.electacta.2021.138690 ↗
26. New insights into evaluating catalyst activity and stability for oxygen evolution reactions in alkaline media10.1039/C7SE00337D ↗
27. Ionomer network of catalyst layers for proton exchange membrane fuel cell
28. Experimental and Theoretical Analysis of Ink Dispersion Stability for Polymer Electrolyte Fuel Cell Applications10.1149/2.0961706jes ↗
29. Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks10.1021/acsami.8b15039 ↗
30. Dynamic Light Scattering Based Microelectrophoresis: Main Prospects and Limitations10.1080/01932691.2011.625523 ↗
31. Zeta potential: An introduction in 30 minutes, zetasizer nano serles technical note
32. Study of converging-diverging channel induced convective mass transport in a proton exchange membrane fuel cell10.1016/j.enconman.2021.114095 ↗
33. Effect of operating conditions on current density distribution and high frequency resistance in a segmented PEM fuel cell10.1016/j.ijhydene.2012.02.024 ↗
34. Measurement of Oxygen Transport Resistance in PEM Fuel Cells by Limiting Current Methods10.1149/1.3152226 ↗
35. Heat and Water Transport in Hydrophobic Diffusion Media of PEM Fuel Cells10.1149/1.3454721 ↗
36. Improvement of water management by a microporous sublayer for PEM fuel cells10.1016/S0378-7753(02)00058-7 ↗
37. Aqueous dispersions of carbon black and its hybrid with carbon nanofibers10.1039/C8RA05446K ↗
38. DLS and zeta potential - What they are and what they are not?10.1016/j.jconrel.2016.06.017 ↗
39. Shear thickening behavior of nanoparticle suspensions with carbon nanofillers10.1007/s11051-013-1816-x ↗
40. Rheology of aqueous carbon black dispersions10.1016/j.jcis.2003.12.004 ↗
41. Understanding the links between rheology and particle parameters
42. Non-aqueous carbon black suspensions for lithium-based redox flow batteries: Rheology and simultaneous rheo-electrical behavior10.1039/c3cp51371h ↗
43. Discontinuous shear thickening in confined dilute carbon nanotube suspensions10.1073/pnas.1018685108 ↗
44. Giant Rheological Effect of Shear Thickening Suspension Comprising Silica Nanoparticles with No Aggregation10.1016/j.jmst.2016.06.008 ↗
45. Mechanical History Dependence in Carbon Black Suspensions for Flow Batteries: A Rheo-Impedance Study10.1021/acs.langmuir.6b04322 ↗
46. Percolation Characteristics of Conductive Additives for Capacitive Flowable (Semi-Solid) Electrodes10.1021/acsami.9b19739 ↗
47. Tadros · 2010
48. Anisotropic Nanoparticles Contributing to Shear-Thickening Behavior of Fumed Silica Suspensions10.1021/acsomega.7b01484 ↗
49. Effect of microporous layer composed of carbon nanotube and acetylene black on polymer electrolyte membrane fuel cell performance10.1016/j.ijhydene.2014.10.146 ↗
50. Scaling laws for van der Waals interactions in nanostructured materials10.1038/ncomms3341 ↗
51. Microporous layer to carbon fibre substrate interface impact on polymer electrolyte membrane fuel cell performance10.1016/j.jpowsour.2019.02.099 ↗
52. Influence of the Gas Diffusion Layer Compression on the Oxygen Transport in PEM Fuel Cells at High Water Saturation Levels10.1149/2.0691706jes ↗
53. Experimental and computational study of the microporous layer and hydrophobic treatment in the gas diffusion layer of a proton exchange membrane fuel cell10.1016/j.jpowsour.2021.230350 ↗
54. Development of 1-D multiphysics PEMFC model with dry limiting current experimental validation10.1016/j.electacta.2019.134601 ↗
55. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
56. Modeling Two-Phase Water Transport in Hydrophobic Diffusion Media for PEM Fuel Cells10.1149/1.3551504 ↗
57. Limiting Current as a Tool to Study Oxygen Transport in PEM Fuel Cells10.1149/05002.0035ecst ↗