journal article·2023-09Open access

Systematic study on Li dendrite growth and suppression in pouch-type lithium-ion batteries with misaligned electrode pairs

Seungyeop Choi, Nayeon Kim, Dahee Jin, Youngjoon Roh, Dongyoon Kang, Hyungjin Lee, Seung-Tae Hong, Hongkyung Lee, Yong Min Lee

Abstract

Among the various latent defects in pouch-type lithium-ion batteries (LIBs), electrode misalignment can occur during cell assembly or due to external impacts during actual operation. However, the effects of electrode misalignment on the electrochemical characteristics have not been sufficiently investigated, especially in pouch-type LIBs. Thus, we systematically design three pouch-type LIBs with different degrees of electrode misalignment (well-aligned, slightly misaligned, and largely misaligned configurations). As the degree of misalignment increases, not only the initial Coulombic efficiency but also the reversible discharge capacity decrease because of Li dendritic growth on the side of the Cu current collector (CC) that overlaps with the misaligned cathode. To address this unavoidable latent defect, we suggest a new strategy to block the side of the Cu CC through application of an insulating layer. This insulating layer can successfully improve both the initial Coulombic efficiency and reversible discharge capacity by efficiently suppressing Li dendritic growth. Thus, this simple idea is an excellent option for ensuring the safety of LIBs with misaligned electrode pairs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A review on the thermal hazards of the lithium-ion battery and the corresponding countermeasures10.3390/app9122483 ↗
2. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
3. A review of lithium ion battery failure mechanisms and fire prevention strategies10.1016/j.pecs.2019.03.002 ↗
4. Study of the fire behavior of high-energy lithium-ion batteries with full-scale burning test10.1016/j.jpowsour.2015.03.035 ↗
5. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
6. Electrode stack geometry changes during gas evolution in pouch-cell-type lithium ion batteries10.1149/2.0241701jes ↗
7. Evaluating the manufacturing quality of lithium ion pouch batteries10.1149/1945-7111/ac6539 ↗
8. Analysis of manufacturing-induced defects and structural deformations in lithium-ion batteries using computed tomography10.3390/en11040925 ↗
9. A guide to full coin cell making for academic researchers10.1149/2.1171902jes ↗
10. Achieving highly reproducible results in graphite-based Li-ion full coin cells10.1016/j.joule.2021.03.016 ↗
11. Electrode alignment: ignored but important design parameter in assembling coin-type full lithium-ion cells10.1149/1945-7111/ac4f23 ↗
12. 2021
13. In-operando high-speed tomography of lithium-ion batteries during thermal runaway10.1038/ncomms7924 ↗
14. Mechanical deformation of lithium-ion pouch cells under in-plane loads—part I: experimental investigation10.1149/1945-7111/ab8e83 ↗
15. Mechanical damage in a lithium-ion pouch cell under indentation loads10.1016/j.jpowsour.2017.04.101 ↗
16. Dynamic mechanical behavior of lithium-ion pouch cells subjected to high-velocity impact10.1016/j.compstruct.2019.03.046 ↗
17. Influence of loading rate and out of plane direction dependence on deformation and electro-mechanical failure behavior of a lithium-ion pouch cell10.1016/j.est.2022.105906 ↗
18. Ultrasonic scanning to observe wetting and “unwetting” in Li-ion pouch cells10.1016/j.joule.2020.07.014 ↗
19. Nanoscale nucleation and growth of electrodeposited lithium metal10.1021/acs.nanolett.6b04755 ↗
20. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions10.1016/S0167-2738(02)00080-2 ↗
21. Transition of lithium growth mechanisms in liquid electrolytes10.1039/C6EE01674J ↗
22. A review on the deposition/dissolution of lithium metal anodes through analyzing overpotential behaviors
23. Toward understanding the real mechanical robustness of composite electrode impregnated with a liquid electrolyte
24. Swelling of semi-crystalline PVDF by a PMMA-based nanostructured diblock copolymer: morphology and mechanical properties10.1016/j.polymer.2015.08.055 ↗
25. Effect of back-side-coated electrodes on electrochemical performances of lithium-ion batteries10.1016/j.jpowsour.2014.11.029 ↗
26. Effect of cathode/anode area ratio on electrochemical performance of lithium-ion batteries10.1016/j.jpowsour.2013.06.062 ↗
27. Computational simulation on power prediction of lithium secondary batteries by using pulse-based measurement methods10.18770/KEPCO.2015.01.01.033 ↗
28. Origin of structural evolution in capacity degradation for overcharged NMC622 via operando coupled investigation10.1021/acsami.7b06326 ↗
29. Lithium migration between blended cathodes of a lithium-ion battery10.1039/C7TA02056B ↗