journal article·2023-06

Polyethylene ceramic separators with semi-interpenetrating polymer network boosting fast-charging cycle capacity retention and safety for lithium-ion batteries

Pengfei Lv, Di Zhang, Yan Lin, Hang Shi, Song Xie, Qiang Sun, Xiantao Chen, Yuanhua He, Changyu Tang

Publisher page

Abstract

Fast-charging lithium-ion batteries (LIBs) have recently received significant attention. In current commercial LIBs, lithium precipitation frequently occurs under long-term cycling and fast-charging conditions, adversely affecting their cycle capacity retention and safety. The primary cause of lithium precipitation is electrolyte loss during long-term cycling. In this study, a thermoplastic polyurethane/polyurethane acrylate semi-interpenetrating polymer network ceramic separator with high electrolyte retention (200%) and interfacial adhesion (6.6 N) is prepared and without a decrease in the energy density. The LiNi 0.8Mn 0.1Co 0.1O 2 /graphite batteries fabricated with this separator show excellent electrochemistry properties (300 cycles, 1.5 C, discharge capacity of 3677 mAh, capacity retention of 93%). Furthermore, this study presents a novel strategy to mitigate the issue of lithium precipitation in fast-charging LIBs. Therefore, this functional separator is a promising alternative for the conventional commercial polyvinylidene difluoride separators and provides a new avenue for developing the next generation of fast-charging devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Fast charging of lithium-ion batteries: a review of materials aspects10.1002/aenm.202101126 ↗
2. Lithium-ion battery fast charging: a review10.1016/j.etran.2019.100011 ↗
3. Three-dimensional, submicron porous electrode with a density gradient to enhance charge carrier transport10.1021/acsnano.2c03480 ↗
4. Interfacially stable and high-safety lithium batteries enabled by porosity engineering toward cellulose separators10.1016/j.memsci.2022.120807 ↗
5. Green synthesis of [(C4H9)4N]3[PMo12O40]∕graphene nanosheets nanocomposites as advanced cathode for high performance lithium ion batteries10.1016/j.nanoso.2017.07.002 ↗
6. Extended cycle life implications of fast charging for lithium-ion battery cathode10.1016/j.ensm.2021.07.001 ↗
7. Review—lithium plating detection methods in Li-ion batteries10.1149/1945-7111/abd3b8 ↗
8. Interaction of cyclic ageing at high-rate and low temperatures and safety in lithium-ion batteries10.1016/j.jpowsour.2014.08.135 ↗
9. Critical current density in solid-state lithium metal batteries: mechanism, influences, and strategies10.1002/adfm.202009925 ↗
10. Stabilization of lithium-metal batteries based on the in situ formation of a stable solid electrolyte interphase layer10.1021/acsami.8b04592 ↗
11. Research progress in stable interfacial constructions between composite polymer electrolytes and electrodes10.1039/D1EE03466A ↗
12. A review on the key issues of the lithium ion battery degradation among the whole life cycle10.1016/j.etran.2019.100005 ↗
13. Temperature dependent ageing mechanisms in Lithium-ion batteries – a Post-Mortem study10.1016/j.jpowsour.2014.03.112 ↗
14. Multi-directional laser scanning as innovative method to detect local cell damage during fast charging of lithium-ion cells10.1016/j.est.2016.09.002 ↗
15. An artificial lithium protective layer that enables the use of acetonitrile-based electrolytes in lithium metal batteries10.1002/anie.201801737 ↗
16. A novel organic "polyurea" thin film for ultralong-life lithium-metal anodes via molecular-layer deposition10.1002/adma.201806541 ↗
17. Polymer-inorganic solid-electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions10.1038/s41563-019-0305-8 ↗
18. A review on the failure and regulation of solid electrolyte interphase in lithium batteries10.1016/j.jechem.2020.11.016 ↗
19. Rapid lithium diffusion in Order@Disorder pathways for fast‐charging graphite anodes10.1002/sstr.202070001 ↗
20. High-quality mesoporous graphene particles as high-energy and fast-charging anodes for lithium-ion batteries10.1038/s41467-019-09274-y ↗
21. A review of recent developments in membrane separators for rechargeable lithium-ion batteries10.1039/C4EE01432D ↗
22. Separator technologies for lithium-ion batteries10.1007/s10008-010-1264-9 ↗
23. Characterization and performance evaluation of lithium-ion battery separators10.1038/s41560-018-0295-9 ↗
24. Electrospun composite gel polymer electrolytes with high thermal conductivity toward wide temperature lithium metal batteries10.1021/acsaem.1c01420 ↗
25. A newly designed composite gel polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for enhanced solid-state lithium-sulfur batteries10.1002/chem.201703464 ↗
26. Thermal runaway of lithium-ion batteries without internal short circuit10.1016/j.joule.2018.06.015 ↗
27. Challenges and strategies for fast charge of Li-ion batteries10.1002/celc.202000650 ↗
28. Gel polymer electrolyte based on hydrophilic–lipophilic TiO2-modified thermoplastic polyurethane for high-performance Li-ion batteries10.1007/s10853-020-05360-5 ↗
29. Self-healable solid polymeric electrolytes for stable and flexible lithium metal batteries10.1002/anie.201910478 ↗
30. A promising TPU/PEO blend polymer electrolyte for all-solid-state lithium ion batteries10.1016/j.electacta.2017.10.037 ↗
31. Flexible and free-standing LiFePO4/TPU/SP cathode membrane prepared via phase separation process for lithium ion batteries10.1016/j.memsci.2017.06.083 ↗
32. Polyurethane-based polymer electrolytes for lithium Batteries: advances and perspectives10.1016/j.cej.2021.132659 ↗
33. Polycarbonate-based polyurethane as a polymer electrolyte matrix for all-solid-state lithium batteries10.1016/j.jpowsour.2018.04.020 ↗
34. Understanding and calibration of charge storage mechanism in cyclic voltammetry curves10.1002/anie.202104167 ↗
35. Robust succinonitrile-based gel polymer electrolyte for lithium-ion batteries withstanding mechanical folding and high temperature10.1021/acsami.8b06800 ↗
36. Flame-retardant solid polymer electrolyte based on phosphorus-containing polyurethane acrylate/succinonitrile for lithium-ion batteries10.1021/acsaem.2c00751 ↗
37. A robust and flexible bulk superhydrophobic material from silicone rubber/silica gel prepared by thiol–ene photopolymerization10.1039/C8TA11111A ↗
38. Flexible nanocomposite polymer electrolyte based on UV-cured polyurethane acrylate for lithium metal batteries10.1021/acssuschemeng.1c00467 ↗
39. Hybrid separator containing reactive, nanostructured alumina promoting in-situ gel electrolyte formation for lithium-ion batteries with good cycling stability and enhanced safety10.1016/j.jpowsour.2020.228519 ↗
40. Charged polymer-coated separators by atmospheric plasma-induced grafting for lithium-ion batteries10.1021/acsami.6b08781 ↗
41. Electrochemical impedance spectroscopy of metal oxide electrodes for energy applications10.1021/acsaem.9b01965 ↗
42. A novel porous gel polymer electrolyte based on poly(acrylonitrile-polyhedral oligomeric silsesquioxane) with high performances for lithium-ion batteries10.1016/j.memsci.2017.09.077 ↗
43. A self-standing, UV-cured semi-interpenetrating polymer network reinforced composite gel electrolytes for dendrite-suppressing lithium ion batteries10.1016/j.jmat.2018.12.006 ↗
44. Poly(ethylene oxide) reinforced Li6PS5Cl composite solid electrolyte for all-solid-state lithium battery: enhanced electrochemical performance, mechanical property and interfacial stability10.1016/j.jpowsour.2018.11.036 ↗
45. Influence of temperature on the aging behavior of 18650-type lithium ion cells: a comprehensive approach combining electrochemical characterization and post-mortem analysis10.1016/j.jpowsour.2016.12.040 ↗
46. Thermal characteristics of 80 °C storage-degraded 18650-type lithium-ion secondary cells10.1016/j.jpowsour.2019.01.087 ↗
47. Effects of rest time after Li plating on safety behavior—ARC tests with commercial high-energy 18650 Li-ion cells, Electrochim
48. Fast charge-driven Li plating on anode and structural degradation of cathode10.1149/1945-7111/abc031 ↗