journal article·2023-03Open access

Multi-technique characterization of spray coated and roll-to-roll coated gas diffusion fuel cell electrodes

Samantha Medina, Jayson G. Foster, Michael J. Dzara, Min Wang, Michael Ulsh, Scott A. Mauger, Svitlana Pylypenko

Abstract

This work reports the characterization of catalyst layer (CL) structure and composition for a set of gas-diffusion electrodes (GDEs) fabricated by different coating methods with the goal of developing a better understanding of CL processing-structure-property-performance relationships. The CL coating techniques used in this study were ultrasonic spray coating, and two roll-to-roll (R2R) methods – gravure and slot die. Scanning transmission electron microscopy (STEM) coupled with X-ray energy dispersive spectroscopy (EDS) analysis of GDE cross-sections provided bulk information, while scanning electron microscopy (SEM) with EDS and X-ray photoelectron spectroscopy (XPS) were used to investigate the near surface and surface composition of the CLs that will be in direct contact with the membrane once the membrane electrode assembly (MEA) is constructed. This study demonstrates that common quantification parameters, namely the F:Pt ratio extracted from cross-sectional STEM-EDS maps and top-down CL measurements with SEM and XPS, along with roughness parameters quantified from SEM micrographs are useful parameters in explaining and potentially predicting performance trends. Additionally, it highlights the importance of understanding key CL surface properties for advancing the manufacturability of high-performance components for polymer electrolyte membrane (PEM) technologies.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. The controllable design of catalyst inks to enhance PEMFC performance: a review10.1007/s41918-020-00083-2 ↗
2. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
3. Recent developments in catalyst-related PEM fuel cell durability10.1016/j.coelec.2020.02.007 ↗
4. The role of hydrogen and fuel cells in the global energy system10.1039/C8EE01157E ↗
5. Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers10.1149/2.0091813jes ↗
6. Advancements in cathode catalyst and cathode layer design for proton exchange membrane fuel cells10.1038/s41467-021-25911-x ↗
7. Utilizing ink composition to tune bulk-electrode gas transport, performance, and operational robustness for a Fe–N–C catalyst in polymer electrolyte fuel cell10.1016/j.nanoen.2020.104943 ↗
8. The impact of ink and spray variables on catalyst layer properties, electrolyzer performance, and electrolyzer durability10.1149/1945-7111/abc746 ↗
9. A novel method for preparing proton exchange membrane fuel cell electrodes by the ultrasonic-spray technique10.1016/j.jpowsour.2011.06.024 ↗
10. Fabrication of catalyst-coated membrane-electrode assemblies by doctor blade method and their performance in fuel cells10.1016/j.jpowsour.2010.05.004 ↗
11. Analysis of inkjet printed PEFC electrodes with varying platinum loading10.1149/2.1111607jes ↗
12. Improving the bulk gas transport of Fe-N-C platinum group metal-free nanofiber electrodes via electrospinning for fuel cell applications10.1016/j.nanoen.2020.104791 ↗
13. Toward optimizing electrospun nanofiber fuel cell catalyst layers: microstructure and Pt accessibility10.1021/acsaem.0c03073 ↗
14. Slot-die-coating operability windows for polymer electrolyte membrane fuel cell cathode catalyst layers10.1016/j.jcis.2021.11.047 ↗
15. Development of high-performance roll-to-roll-coated gas-diffusion-electrode-based fuel cells10.1016/j.jpowsour.2021.230039 ↗
16. Enabling industrial production of electrodes by use of slot-die coating for HT-PEM fuel cells10.1016/j.ijhydene.2018.11.091 ↗
17. Homogeneity analysis of square meter-sized electrodes for PEM electrolysis and PEM fuel cells10.1007/s11998-018-0074-3 ↗
18. Slot-die coating: a new preparation method for direct methanol fuel cells catalyst layers10.1115/1.4024607 ↗
19. The impact of platinum loading on oxygen transport resistance10.1149/2.061212jes ↗
20. Effect of the state of distribution of supported Pt nanoparticles on effective Pt utilization in polymer electrolyte fuel cells10.1039/c3cp51801a ↗
21. Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells10.1016/j.jpowsour.2016.02.091 ↗
22. Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions10.1016/j.pecs.2020.100859 ↗
23. Review of characterization and modeling of polymer electrolyte fuel cell catalyst layer: the blessing and curse of ionomer10.1007/s11708-017-0490-6 ↗
24. The property and performance differences between catalyst coated membrane and catalyst coated diffusion media10.1115/1.4003632 ↗
25. On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
26. Investigation of catalyst layer defects in catalyst-coated membrane for PEMFC application: non-destructive method10.1002/er.4107 ↗
27. Multiscale tomography of nanoporous carbon-supported noble metal catalyst layers10.1016/j.jpowsour.2012.11.106 ↗
28. Impact of manufacturing processes on proton exchange membrane fuel cell performance10.1016/j.apenergy.2018.05.086 ↗
29. Visualization, understanding, and mitigation of process-induced-membrane irregularities in gas diffusion electrode-based polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2021.01.186 ↗
30. Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies10.1016/j.jpowsour.2019.227581 ↗
31. Impact of microporous layer roughness on gas-diffusion-electrode-based polymer electrolyte membrane fuel cell performance10.1021/acsaem.9b01871 ↗
32. Influence of hot-pressing temperature on the performance of PEMFC and catalytic activity10.1007/s10800-008-9758-1 ↗
33. Catalyst layer ink interactions that affect coatability10.1149/2.0191805jes ↗
34. Understanding inks for porous-electrode formation10.1039/C7TA07255D ↗
35. Recent advances in catalyst materials for proton exchange membrane fuel cells10.1063/5.0045801 ↗
36. Catalyst layer in PEMFC electrodes—fabrication, characterisation and analysis10.1016/j.cej.2006.10.035 ↗
37. Carbon corrosion in PEM fuel cells and the development of accelerated stress tests10.1149/2.0061806jes ↗
38. SEM and XAS characterization at beginning of life of Pd-based cathode electrocatalysts in PEM fuel cells10.1016/j.ijhydene.2014.01.056 ↗
39. Graphitized carbon: a promising stable cathode catalyst support material for long term PEMFC applications10.3390/ma11060907 ↗
40. Dual-beam FIB/SEM characterization, statistical reconstruction, and pore scale modeling of a PEMFC catalyst layer10.1149/2.036404jes ↗
41. Catalyst-layer ionomer imaging of fuel cells10.1149/06917.0455ecst ↗
42. More · 2006
43. Electronic metal-support interaction enhanced oxygen reduction activity and stability of boron carbide supported platinum10.1038/ncomms15802 ↗
44. X-ray photoelectron spectroscopy and rotating disk electrode measurements of smooth sputtered Fe-N-C films10.1016/j.apsusc.2020.146012 ↗
45. Enhanced stability of PtRu supported on N-doped carbon for the anode of a DMFC10.1149/2.063211jes ↗
46. Structure-to-Property relationships in fuel cell catalyst supports: correlation of surface chemistry and morphology with oxidation resistance of carbon blacks10.1016/j.jpowsour.2012.04.095 ↗
47. Artyushkova · Statistical Structure-to-Property Relationships for Fuel Cell Materials · 2013 · 77 · 86
48. Role of surface chemistry on catalyst/ionomer interactions for transition metal–nitrogen–carbon electrocatalysts10.1021/acsaem.7b00002 ↗
49. Long term investigations of silver cathodes for alkaline fuel cells10.1016/j.jpowsour.2003.09.022 ↗
50. Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells10.1038/s41563-019-0487-0 ↗
51. Multi-scale multi-technique characterization approach for analysis of PEM electrolyzer catalyst layer degradation10.1149/1945-7111/ac7258 ↗
52. Elucidating the dynamic nature of fuel cell electrodes as a function of conditioning: an ex situ material characterization and in situ electrochemical diagnostic study10.1021/acsami.9b11365 ↗
53. A physics-based impedance model of proton exchange membrane fuel cells exhibiting low-frequency inductive loops10.1149/2.0361506jes ↗
54. Pfeilsticker · 2019
55. Increased photoelectron transmission in high-pressure photoelectron spectrometers using “swift acceleration10.1016/j.nima.2015.02.047 ↗
56. Chemical and ionic conductivity degradation of ultra-thin ionomer film by X-ray beam exposure10.1149/2.024306jes ↗
57. Bennett · 1992
58. Mapping microscale chemical heterogeneity in nafion membranes with X-ray photoelectron spectroscopy10.1149/2.0771811jes ↗
59. Dictating Pt-based electrocatalyst performance in polymer electrolyte fuel cells, from formulation to application10.1021/acsami.9b17614 ↗
60. Tailoring electrode microstructure via ink content to enable improved rated power performance for platinum cobalt/high surface area carbon based polymer electrolyte fuel cells10.1016/j.jpowsour.2020.228889 ↗
61. Tri-helical gravure roll coating10.1016/j.ces.2009.09.047 ↗
62. Drying regime maps for particulate coatings10.1002/aic.12190 ↗
63. Layer Formation from polymer carbon-black dispersions10.3390/coatings8120450 ↗